Whirlpool HOB 425/S Manual


Læs gratis den danske manual til Whirlpool HOB 425/S (6 sider) i kategorien Kogesektioner. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Whirlpool HOB 425/S, eller vil du spørge andre brugere om produktet?

Side 1/6
9
CONTENTS GB
BEFORE USING THE GLASS CERAMIC HOB PAGE 10
INSTALLATION PAGE 10
ELECTRICAL CONNECTION PAGE 11
ENERGY SAVING TIPS PAGE 12
PROTECTING THE ENVIRONMENT PAGE 12
PRECAUTIONS AND GENERAL
RECOMMENDATIONS PAGE 12
COOKTOP ACCESSORIES PAGE 13
CARE AND MAINTENANCE OF THE
GLASS-CERAMIC COOKTOP PAGE 13
TROUBLESHOOTING GUIDE PAGE 13
AFTER SALES SERVICE PAGE 14
1gb58912.fm5 Page 9 Thursday, May 9, 2002 4:45 PM
10
To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
Cooktop
The cooktop must be set into a worktop
between 20 mm and 50 mm thick.
Insert a separator panel at a minimum distance
of 90mm from the bottom of the hob so that it
is inaccessible to the user.
If the cooktop is to be installed next to a
column unit, leave a distance of at least 100
mm from the edge of the cooktop to the side of
the column unit.
Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
If not already present, fit the supplied seal to the
cooktop flange after cleaning the contact area as
shown in the figure.
N.B.: Remove the protective film before installing the
cooktop.
If the worktop is made of wood, use the supplied
spring clips and screws.
1. Position the 4 clips (D) as shown and at the
specified dimensions.
2. Secure the clips using screws (E).
3. Fit the cooktop into the worktop.
If the worktop is made of marble, plastic,
ceramics, natural stone, etc., the cooktop must
be secured with brackets (F) code 4819 404 78697
(to be requested from After-Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 brackets (F) as shown in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screws (G) in holes (H).
BEFORE USING THE GLASS CERAMIC HOB
INSTALLATION
1gb58912.fm5 Page 10 Thursday, May 9, 2002 4:45 PM


Produkt Specifikationer

Mærke: Whirlpool
Kategori: Kogesektioner
Model: HOB 425/S

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool HOB 425/S stil et spørgsmål nedenfor, og andre brugere vil svare dig