Whirlpool UMV1170LS Manual

Whirlpool Mikrobølgeovn UMV1170LS

Læs gratis den danske manual til Whirlpool UMV1170LS (32 sider) i kategorien Mikrobølgeovn. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Whirlpool UMV1170LS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation

Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration

in these installation instructions.

Table of Contents

MICROWAVE HOOD COMBINATION SAFETY

W11611725A

MICROWAVE HOOD COMBINATION SAFETY ............................1

INSTALLATION REQUIREMENTS ................................................. 2

Tools and Parts .............................................................................2

Separate Cardboard Template ..................................................... 2

Location Requirements ................................................................2

Electrical Requirements ...............................................................3

INSTALLATION INSTRUCTIONS ................................................... 4

Remove Mounting Plate ............................................................... 4

Rotate Blower Motor ....................................................................4

Locate Wall Stud(s) ......................................................................7

Mark Rear Wall .............................................................................7

Drill Holes in Rear Wall .................................................................8

Attach Mounting Plate to Wall .....................................................8

Prepare Upper Cabinet ................................................................9

Install Damper Assembly (for wall venting only) ....................10

Install the Microwave Oven ........................................................10

Complete Installation .................................................................11

VENTING DESIGN SPECIFICATIONS ........................................12

ASSISTANCE ................................................................................14

Replacement Parts .....................................................................14

Accessories ................................................................................14

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

■ Measuring tape

■ Pencil

■ Masking tape or

thumbtacks

■ Scissors

■ No. 2 Phillips screwdriver

■ No. 3 Phillips screwdriver

for 1/4 - 20 x 3" (7.6 cm)

bolts

■ Drill

■ 3/16" (5 mm), 3/8" (1 cm),

5/8" (1.6 cm) drill bits

■ 3/4" (1.9 cm) hole saw

■ Diagonal wire cutting pliers

■ Stud nder

■ 7⁄16" (1.1 cm) socket

wrench (or box wrench) for

1/4" x 2" (6.4 mm x 5.1cm)

lag screws

■ 1

" (3.8 cm) diameter hole

drill bit for wood or metal

cabinet

■ Keyhole saw

■ Caulking gun and

weatherproof caulking

compound

■ Duct tape

Parts Needed

For information on reordering, see the “Replacement Parts”

section.

NOTE: The hardware items listed here are for wood studs.

For other types of wall structures, be sure to use appropriate

fasteners.

NOTE: Depending on model, aluminum grease lter and

charcoal lter may be combined.

Materials Needed

■ Standard ttings for wall or roof venting. See the “Venting

Design Specications” section.

Separate Cardboard Template

The wall template and upper cabinet template is embedded in

the backside of the carton box. They are used as a rear wall

template and upper cabinet template.

1. Cut along the dotted line to separate the cardboard template

from the backside of the carton box.

2. Set the cardboard template to the side and refer to it during

the “Mark Rear Wall” and “Prepare Upper Cabinet” parts of

installation.

Location Requirements

Check the opening where the microwave oven will be installed.

The location must provide:

■ Minimum installation dimensions. See the “Installation

Dimensions” illustration.

■ Minimum one 2" x 4" (5.1 x 10.2 cm) wood wall stud and

minimum 3/8" (1 cm) thickness drywall or plaster/lath within

cabinet opening.

■ Support for weight of 150 lbs (68 kg) which includes

microwave oven and items placed inside the microwave

oven and upper cabinet.

■ Grounded electrical outlet inside upper cabinet. See the

“Electrical Requirements” section.

NOTES:

■ If installing the microwave oven near a left sidewall, make

sure there is at least 6" (15.2 cm) of clearance between the

wall and the microwave oven so that the door can open fully.

■ Some models have a pocket handle. If installing the

microwave near a right side wall, make sure there is at least

3" (7.6 cm) of clearance between wall and microwave oven

so you can grab the handle integrated inside the door.

■ Some cabinet and building materials are not designed to

withstand the heat produced by the microwave oven for

cooking. Check with your builder or cabinet supplier to make

sure that the materials used will not discolor, delaminate, or

sustain other damages.

Special Requirements

For Wall Venting Installation Only:

■ Cutout must be free of any obstructions so that the vent t

properly and the damper blade opens freely and fully.

For Roof Venting Installation Only:

■ If you are using a rectangular-to-round transition piece, the

3" (7.6 cm) clearance needs to exist above the microwave

oven so that the damper blade can open freely and fully.

See “Rectangular to Round Transition” illustration in the

“Venting Design Specications” section.

DEF

A. 3/16 - 24 x 3" round-head

bolts (2)

B. 1/4 - 20 x 3" at-head bolts (2)

C. Washers (2)

D. 3/16" toggle nuts (2)

E. 1/4" x 2" lag screws (2)

F. #6 x 3/8" Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or

roof venting)

Not Shown:

■ Mounting plate (attached to

back of microwave oven)

■ Cardboard template (part of

packaging)

■ Aluminum grease lters

■ Charcoal lters (Depending

on model, charcoal lters may

not be included. See User

Instructions.)

12 1/2" (31,8 cm)

6 1/4

(15,9 cm

)

5 3/4"

(14,6 cm)

4 3/4

(12,1 cm)

(25,4 cm)

12 1/2" (31,8 cm)

7 1/2

" (19,1 cm)

6 3/8" (16,2 cm)

15 5/8

(39,71 cm)

15 5/8"

(39,71 cm)

14 1/6" (35.96 cm)

14 1/6"

(35.96 cm)

12 1/2

(31.8 cm)

6 1/4

(15.9 cm

)

5 3/4

(14.6 cm)

4 3/4

(12.1 cm)

(25.4 cm)

12 1/2

(31.8 cm)

7 1/2

(19.1 cm)

6 3/8

(16.2 cm)

15 5/8

(39.71 cm)

15 5/8

(39.71 cm)

14 1/6

(35.96 cm)

14 1/6

(35.96 cm)

A. Backside of the carton box

B. Cardboard template (including Rear Wall template and Upper

Cabinet template)

Produkt Specifikationer

Mærke:	Whirlpool
Kategori:	Mikrobølgeovn
Model:	UMV1170LS

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool UMV1170LS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrobølgeovn Whirlpool Manualer

Whirlpool WMN14BBF Manual

13 August 2025

Whirlpool MWSC 833 SX Manual

27 Juli 2025

Whirlpool MWF 420 SL Manual

27 Juli 2025

Whirlpool MWP 303 SB Manual

27 Juli 2025

Whirlpool MWF427BL Manual

27 Juli 2025

Whirlpool AMW 442/IX Manual

27 Juli 2025

Whirlpool JT 469 Manual

27 Juli 2025

Whirlpool AMW 404/IX Manual

27 Juli 2025

Whirlpool W11I MW161 Manual

27 Juli 2025

Whirlpool W6 MD440 NB Manual

27 Juli 2025

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer

Candy CMGA20SDLW-07 Manual

15 August 2025

Candy CMG20SMW-07 Manual

14 August 2025

Candy CMG20SMB-07 Manual

14 August 2025

Candy CMW20SMW-07 Manual

14 August 2025

Candy CMG171X Manual

14 August 2025

Candy CBLK20SMB Manual

14 August 2025

Sharp R-60A0 Manual

14 August 2025

Sencor SMW 1920RD Manual

14 August 2025

Candy CMWA20SDLWLI Manual

14 August 2025

Candy CMGI201EX Manual

14 August 2025