Whirlpool WCC28UXA Manual

Whirlpool Ovn WCC28UXA

Læs gratis den danske manual til Whirlpool WCC28UXA (24 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Whirlpool WCC28UXA, eller vil du spørge andre brugere om produktet?

Side 1/24
1
EN
Owner’s Manual
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
PLEASE SCAN THE QR CODE ON
YOUR APPLIANCE IN ORDER TO
REACH MORE INFORMATION
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
1. Control panel
2. Cavity Fan
(not visible)
3. Ladder rack
(the level is indicated on the front of
the oven)
4. Door
5. Lamp
6. Upper heating element/grill p
7. Probe insert point
(if present)
8. Identication plate
(do not remove)
9. Lower heating element
(not visible)
5
7
1
3
8
9
4
2
6
Please note: Type of knob may vary from model type. If the knobs are push-activated, push down on the center of the knob to release
it from seating.
CONTROL PANEL DESCRIPTION
2
1
3
4
1. SELECTION KNOB
For switching the oven on by selecting a function. Turn to
the
position to switch the oven o.
2. DISPLAY
3. THERMOSTAT KNOB
Turn to select the temperature you require when
activating manual functions.
4. TEMPERATURE INDICATOR
2
ACCESSORIES
WIRE SHELF BAKING TRAY
SLIDING SHELVES RAILS*
(ONLY IN SOME MODELS)
The number of accessories may vary depending on which model is purchased.
*Other accessories can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf onto the level you require by
holding it tilted slightly upwards and resting the
raised rear side (pointing upwards) down first.
Then slide it horizontally along the runners as far as
possible.
Other accessories, like the baking tray, are to be
inserted horizontally, letting them slide on the
runners.
SLIDING RUNNERS AND LADDER RACKS
Before using the oven remove the protective tape
[a] and then remove the protective foil [b] from the
sliding runners.
REMOVING THE SLIDING RUNNERS [c]
Pull the lower part of the sliding runner to uncouple
the lower hooks (1) and pull the sliding runners
upwards, removing them from the upper hooks (2).
REFITTING THE SLIDING RUNNERS [d]
Hook the upper hooks on the ladder racks (1) then
press the lower part of the sliding runners against the
ladder racks, until the lower hooks are clicking (2).
1
2
1
2
[c] [d]
REMOVING AND REFITTING THE LADDER RACKS
1. To remove the ladder racks, firmly grip the external
part of the guide, and pull it towards you to
extract the support and the two internal pins from
the lodging.
2. To reposition the ladder racks, position them near
the cavity and initially insert the two pins into
their lodgings. Next, position the external part
near its lodging, insert the support, and firmly
press towards the wall of the cavity to make sure
the ladder racks is properly secured.


Produkt Specifikationer

Mærke: Whirlpool
Kategori: Ovn
Model: WCC28UXA

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WCC28UXA stil et spørgsmål nedenfor, og andre brugere vil svare dig