Whirlpool WFO 3T121 X Manual

Whirlpool Opvaskemaskine WFO 3T121 X

Læs gratis den danske manual til Whirlpool WFO 3T121 X (8 sider) i kategorien Opvaskemaskine. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Whirlpool WFO 3T121 X, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

DAILY REFERENCE

GUIDE

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.

In order to receive a more complete assistance, please

www.whirlpool.eu/register

You can download the Safety Instructions and the Use

and Care Guide, by visiting our website

http://docs.whirlpool.eu and following the Instructions

on the back of this booklet.

Before using the appliance carefully read Health and Safety guide.

PRODUCT DESCRIPTION

APPLIANCE

1.Upper rack

2. Foldable flaps

3.Upper rack height adjuster

4.Upper spray arm

5.Lower rack

6.Cutlery basket

7.Lower spray arm

8.Filter Assembly

9.Salt reservoir

10.Detergent and Rinse Aid dispensers

11.Rating plate

12.Control panel

0000 000 00000

Service:

CONTROL PANEL

1. On-Off/Reset button with indicator light

2. Program selection button with indicator light

3. Multizone button with indicator light

4. Turbo button with indicator light / Key lock

5. Eco program indicator light

6. Key lock indicator light

7. Display

8. Program number and remaining time indicator

9. Tablet (Tab) indicator light

10. Closed water tap indicator light

11. Salt refill indicator light

12. Rinse Aid refill indicator light

13. Power Clean button with indicator light / Tablet (Tab)

14. Sani Rinse button with indicator light / Tablet (Tab)

15. Delay button with indicator light

16. Start/Pause button with indicator light / Drain out

9 16

14 15

65 7 8 11 12 1310

FIRST TIME USE

SALT, RINSE AID AND DETERGENT

ADVICE REGARDING THE FIRST TIME USE

After installation, remove the stoppers from the racks and the retaining

elastic elements from the upper rack.

FILLING THE SALT RESERVOIR

The use of salt prevents the formation of LIMESCALE on the dishes and

on the machine’s functional components.

• It is important that the salt reservoir be never empty.

• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see

PROGRAMS DESCRIPTION) and should be filled when the SALT REFILL

indicator light in the control panel is lit.

1.Remove the lower rack and unscrew the

reservoir cap (anticlockwise).

2.Position the funnel

(see figure)

and fill the salt

reservoir right up to its edge (approximately 1 kg);

it is not unusual for a little water to leak out.

3.Remove the funnel and wipe any salt residue

away from the opening.

Make sure the cap is screwed on tightly, so that no detergent can get

into the container during the wash program (this could damage the

water softener beyond repair).

Whenever you need to add salt, we recommend carrying out the

procedure before the washing cycle is started.

SETTING THE WATER HARDNESS

To allow the water softener to work in a perfect way, it is essential that

the water hardness setting is based on the actual water hardness in

your house. This information can be obtained from your local water

supplier.

The factory setting is for average (3) water hardness.

1. Switch on the appliance by pressing the

ON/OFF

button.

2. Switch off the appliance by pressing the

ON/OFF

button.

3. Hold down button

START/PAUSE

for 5 seconds, until you hear a

beep.

4. Switch on the appliance by pressing the

ON/OFF

button.

5. The current selection level number and the salt indicator light both

flash.

6. Press button

to select the desired hardness level

(see Water

Hardness Table).

7. Switch off the appliance by pressing the

ON/OFF

button.

Setting is complete!

As soon as this procedure is complete, run a program without loading.

Only use salt that has been specifically designed for dishwashers.

After the salt has been poured into the machine, the SALT REFILL

indicator light switches off.

If the salt container is not filled, the water softener and the heating

element may be damaged as a result.

FILLING THE RINSE AID DISPENSER

Rinse aid makes dish DRYING easier. The rinse aid dispenser

should be filled

when the

RINSE AID REFILL indicator light

in the control panel is lit.

1. Open the dispenser

by pressing and pulling up the tab on the lid.

2. Carefully introduce the rinse aid as far as the maximum (110 ml) reference

notch of the filling space - avoid spilling it. If this happens, clean the spill

immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satisfied with the drying results, you can adjust the

quantity of rinse aid used.

• Switch the dishwasher on using the

ON/OFF

button.

• Switch it off using the

ON/OFF

button.

• Press button

START/PAUSE

three times - a beep will be heard.

• Switch it on using the

ON/OFF

button.

• The current selection level number and rinse aid indicator light flash.

• Press button

to select the level of rinse aid quantity to be supplied.

• Switch it off using the

ON/OFF

button

Setting is complete!

If the rinse aid level is set to 1(ECO), no rinse aid will be supplied. The LOW

RINSE AID indicator light will not be lit if you run out of rinse aid.

A maximum of 4 levels can be set according to the dishwasher model. The fac-

tory setting is for a medium level.

• If you see bluish streaks on the dishes, set a low number (2-3).

• If there are drops of water or limescale marks on the dishes, set a high

number (4-5).

FILLING THE DETERGENT DISPENSER

To open the detergent dispenser use the

opening device A

Introduce the detergent into the dry dispenser B

only.

Place the amount of detergent for pre-washing

directly inside the tub.

1.When measuring out the detergent refer to the

(see PROGRAMS TABLE)

to add the proper quantity. Compartment

comprises a level showing the maximum quantity of liquid or powder

detergent that can be added to each cycle.

2. Remove detergent residues from the edges of the dispenser and close

the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until the closing

device is secured in place.

The detergent dispenser automatically opens up at the right time according to

the program.

If all-in-one detergents are used, we recommend using the

TABLET

button,

because it adjusts the program so that the best washing and drying results are

always achieved.

Water Hardness Table

Level °dH

German degrees

°fH

French degrees

1 Soft 0 - 6 0 - 10

2 Medium 7 - 11 11 - 20

3 Average 12 - 17 21 - 30

4 Hard 17 - 34 31 - 60

5 Very hard 35 - 50 61 - 90

Produkt Specifikationer

Mærke:	Whirlpool
Kategori:	Opvaskemaskine
Model:	WFO 3T121 X

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WFO 3T121 X stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Opvaskemaskine Whirlpool Manualer

Whirlpool WIC3C26NUK Manual

8 Juni 2025

Whirlpool WP 76 Manual

6 Juni 2025

Whirlpool ADP 5300 Manual

4 Juni 2025

Whirlpool ADPU 8793 Manual

23 Marts 2025

Whirlpool WH8IB15B2M6LS0 Manual

14 Januar 2025

Whirlpool WFE 2B19 Manual

14 Januar 2025

Whirlpool WH3ID10BS7SA0 Manual

13 Januar 2025

Whirlpool WH8IA15AM3TUS0 Manual

13 Januar 2025

Whirlpool WH8IC15B4M6LHC0 Manual

13 Januar 2025

Whirlpool W0I D734L S Manual

13 Januar 2025

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

Bosch SMS66GI01I Manual

15 Juni 2025

Pelgrim GVWC210L Manual

15 Juni 2025

Bosch SPV4HMX65K Manual

15 Juni 2025

Bosch SMS6HMI00I Manual

15 Juni 2025

Mainstreet Equipment 541STAND24KIT Manual

15 Juni 2025

Bosch SMV4EVX02F Manual

15 Juni 2025

Pelgrim GVWC291L Manual

15 Juni 2025

Mainstreet Equipment 541STAND24 Manual

15 Juni 2025

CMA Dishmachines E-AH-EXT Manual

15 Juni 2025

Bosch SPV2IKX10K Manual

15 Juni 2025