Whirlpool YWMH53521HW Manual

Whirlpool Mikrobølgeovn YWMH53521HW

Læs gratis den danske manual til Whirlpool YWMH53521HW (32 sider) i kategorien Mikrobølgeovn. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Whirlpool YWMH53521HW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

MICROWAVE HOOD COMBINATION

INSTALLATION INSTRUCTIONS

This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See the “Installation

Requirements” section for further notes.

These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration

in these installation instructions.

INSTRUCTIONS D’INSTALLATION

DE L’ENSEMBLE FOUR À MICRO-ONDES/HOTTE

Ce produit est conçu pour l’utilisation au-dessus d’appareils de cuisson électriques ou à gaz de 36 po (91,4 cm) de largeur ou moins.

Voir la section « Exigences d’installation » pour d’autres remarques.

Ces instructions d’installation sont valables pour plusieurs modèles. Il se peut que l’apparence de votre propre modèle soit légèrement

différente de celle montrée sur les illustrations dans ce document.

Table of Contents/Table des matières

W11496339A

MICROWAVE HOOD COMBINATION SAFETY ............................2

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts .............................................................................2

Separate Cardboard Template .....................................................3

Location Requirements ................................................................3

Product Dimensions .....................................................................3

Electrical Requirements ...............................................................4

INSTALLATION INSTRUCTIONS ...................................................5

Remove Mounting Plate ...............................................................5

Rotate Blower Motor ....................................................................5

Locate Wall Stud(s) ......................................................................8

Mark Rear Wall .............................................................................9

Drill Holes in Rear Wall ...............................................................10

Attach Mounting Plate to Wall ...................................................10

Prepare Upper Cabinet ..............................................................11

Install Damper Assembly

(for wall venting only) ..................................................................11

Install the Microwave Oven ........................................................12

Complete Installation .................................................................13

VENTING DESIGN SPECIFICATIONS ........................................14

ASSISTANCE ................................................................................15

Replacement Parts .....................................................................15

Accessories ................................................................................15

SÉCURITÉ DE L’ENSEMBLE FOUR À

MICRO-ONDES/HOTTE...............................................................16

EXIGENCES D’INSTALLATION ...................................................16

Outillage et pièces ......................................................................16

Gabarit en carton séparé ...........................................................17

Exigences d’emplacement .........................................................17

Dimensions du produit ...............................................................18

Spéci cations électriques ..........................................................18

INSTRUCTIONS D’INSTALLATION .............................................19

Dépose de la plaque de montage ..............................................19

Réorientation du moteur du ventilateur .....................................19

Identi er la position du/des poteau(x) du colombage mural .....22

Tracé sur le mur arrière ..............................................................23

Perçage de trous dans le mur arrière .........................................24

Fixation de la plaque de montage sur le mur ............................24

Préparation du placard supérieur ..............................................25

Installation du module du clapet anti-re ux

(pour décharge à travers le mur uniquement) ............................25

Installation du four à micro-ondes .............................................26

Achever l’installation ..................................................................28

SPÉCIFICATIONS/CONCEPTION DU CIRCUIT

D’ÉVACUATION ...........................................................................28

ASSISTANCE ................................................................................30

Pièces de rechange ....................................................................30

Accessoires ................................................................................30

MICROWAVE HOOD COMBINATION SAFETY

INSTALLATION REQUIREMENTS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation.

Read and follow the instructions provided with any tools listed

here.

■Measuring tape

■Pencil

■Masking tape or thumbtacks

■Scissors

■No. 2 Phillips screwdriver

■No. 3 Phillips screwdriver

for 1/4-20 x 3" (7.6 cm) bolts

■Drill

■3/16" (5 mm), 3/8" (1cm),

5/8" (1.6 cm) drill bits

■3/4" (1.9 cm) hole saw

■Diagonal wire cutting pliers

■Stud  nder

■7⁄16" (1.1 cm) socket wrench (or box wrench) for 1/4" x 2"

(6.4 mm x 5.1cm) lag screws

■11/2" (3.8 cm) diameter hole drill bit for wood or metal cabinet

■Keyhole saw

■Caulking gun and weatherproof caulking compound

■Duct tape

Parts Needed

For information on reordering, see the “Replacement Parts”

section.

NOTE: The hardware items listed here are for wood studs.

For other types of wall structures, be sure to use appropriate

fasteners.

NOTE: Depending on model, aluminum grease  lter and

charcoal  lter may be combined.

Materials Needed

Standard  ttings for wall or roof venting. See the “Venting Design

Speci cations” section.

A B C D E F G

A. 3/16-24 x 3" round-head

bolts (2)

B. 1/4-20 x 3"  at-head bolts (2)

C. Washers (2)

D. 3/16" toggle nuts (2)

E. 1/4" x 2" lag screws (2)

F. #6 x 3/8" Sheet metal screws (2)

G. Power supply cord bushing (1)

H. Damper assembly (for wall or

roof venting)

Not Shown:

■Mounting plate (attached to

back of microwave oven)

■Cardboard template (part of

packaging)

■Aluminum grease  lters

■Charcoal  lters (Depending

on model, charcoal  lters may

not be included. See User

Instructions.)

Produkt Specifikationer

Mærke:	Whirlpool
Kategori:	Mikrobølgeovn
Model:	YWMH53521HW

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool YWMH53521HW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrobølgeovn Whirlpool Manualer

Whirlpool WMN14BBF Manual

13 August 2025

Whirlpool MWSC 833 SX Manual

27 Juli 2025

Whirlpool MWF 420 SL Manual

27 Juli 2025

Whirlpool MWP 303 SB Manual

27 Juli 2025

Whirlpool MWF427BL Manual

27 Juli 2025

Whirlpool AMW 442/IX Manual

27 Juli 2025

Whirlpool JT 469 Manual

27 Juli 2025

Whirlpool AMW 404/IX Manual

27 Juli 2025

Whirlpool W11I MW161 Manual

27 Juli 2025

Whirlpool W6 MD440 NB Manual

27 Juli 2025

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer

Candy MIC440VNTB Manual

15 August 2025

Candy CMGA20SDLW-07 Manual

15 August 2025

Candy CMG20SMW-07 Manual

14 August 2025

Candy CMG20SMB-07 Manual

14 August 2025

Candy CMW20SMW-07 Manual

14 August 2025

Candy CMG171X Manual

14 August 2025

Candy CBLK20SMB Manual

14 August 2025

Sharp R-60A0 Manual

14 August 2025

Sencor SMW 1920RD Manual

14 August 2025

Candy CMWA20SDLWLI Manual

14 August 2025