Wisenet HCB-7000A Manual
Wisenet
Overvågningskamera
HCB-7000A
Læs nedenfor 📖 manual på dansk for Wisenet HCB-7000A (38 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 19 personer og blev bedømt med 4.9 stjerner i gennemsnit af 10 brugere
Side 1/38
High Resolution Box Camera
User Manual
HCB-7000A
HCB-7000PHA
High Resolution Box Camera
User Manual
Copyright
©2017 Hanwha Techwin Co., Ltd. All rights reserved.
Trademark
Each of trademarks herein is registered. The name of this product and other trademarks
mentioned in this manual are the registered trademark of their respective company.
Restriction
Copyright of this document is reserved. Under no circumstances, this document shall be
reproduced, distributed or changed, partially or wholly, without formal authorization.
Disclaimer
Hanwha Techwin makes the best to verify the integrity and correctness of the contents
in this document, but no formal guarantee shall be provided. Use of this document and the
subsequent results shall be entirely on the user’s own responsibility. Hanwha Techwin
reserves the right to change the contents of this document without prior notice.
Design and specifications are subject to change without prior notice.
Before operating the camera, confirm the camera model and correct input power voltage.
To help you understand this manual thoroughly, we'll introduce our model description.
■ HCB-7000A SERIES
• NTSC MODEL • PAL MODEL
HCB-7000AN HCB-7000AP
HCB-7000PHA
■ MODEL DESCRIPTION
• HCB-7000XHA
_
_
• SIGNAL SYSTEM
N NTSC MODEL →
P PAL MODEL →
• POWER SOURCE
NTSC MODEL →
H AC 230V~ →
SIGNAL SYSTEM
POWER SOURCE
4_ safety information
safety information
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric
shock is present within this unit.
This exclamation point symbol is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
• To prevent damage which may result in fire or electric shock hazard, do not expose this appliance
to rain or moisture.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with
the installation instructions.
WARNING
1. Be sure to use only the standard adapter that is specified in the specification sheet.
Using any other adapter could cause fire, electrical shock, or damage to the product.
2. Incorrectly connecting the power supply or replacing battery may cause explosion, fire,
electric shock, or damage to the product.
3. Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause
abnormal heat generation or fire.
4. Securely plug the power cord into the power receptacle. insecure connection may cause fire.
5. When installing the camera, fasten it securely and firmly. The fall of camera may cause
personal injury.
English_5
● SAFETY INFORMATION
6. Do not place conductive objects (e.g. screwdrivers, coins, metal parts, etc.) or containers filled
with water on top of the camera. doing so may cause personal injury due to fire, electric shock,
or falling objects.
7. Do not install the unit in humid, dusty, or sooty locations. doing so may cause fire or electric
shock.
8. If any unusual smells or smoke come from the unit, stop using the product. in such case,
immediately disconnect the power source and contact the service center. continued use in
such a condition may cause fire or electric shock.
9. If this product fails to operate normally, contact the nearest service center. never disassemble
or modify this product in any way. (Hanwha Techwin is not liable for problems caused by
unauthorized modifications or attempted repair.)
10. When cleaning, do not spray water directly onto parts of the product. doing so may cause fire
or electric shock.
CAUTION
1. Do not drop objects on the product or apply strong shock to it. Keep away from a location
subject to excessive vibrationor magnetic interference.
2. Do not install in a location subject to high temperature (over 55°C), low temperature (below
-10°C), or high humidity. Doing so may cause fire or electric shock.
3. If you want to relocate the already installed product, be sure to turn off the power and then
move or reinstall it.
4. Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may
cause fire or damage to the product.
5. Keep out of direct sunlight and heat radiation sources. It may cause fire.
6. Install it in a place with good ventilation.
7. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may
damage the CMOS image sensor.
8. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
9. The Mains plug is used as a disconnect device and shall stay readily operable at any time
10. Do not expose the camera to radioactivity. Radioactivity exposure may damage the CMOS.
6_ safety information
safety information
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :
1) This device may not cause harmful interference, and
2) This device must accept any interference received including interference that may cause
undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
IC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian
Interference.-Causing Equipment Regulations of ICES-003.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed
of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and
recycle them through your local, free battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
English_7
● IMPORTANT SAFETY INSTRUCTIONS
important safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong is provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus.
13. Unplug this apparatus when a card is used. Use caution when moving the
cart/ apparatus combination to avoid injury from tip-over.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as powersupply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. This product is intended to be supplied by a Listed Power Supply Unit marked “Class 2” or
“LPS” and rated from 24 Vac (50/60 Hz) min.0.37 A or 12 Vdc, min.0.41A.
16. If you use excessive force when installing the product, the camera may be damaged and
malfunction.
If you forcibly install the product using non-compliant tools, the product may be damaged.
8_ important safety instructions
17. Do not install the product in a place where chemical substances or oil mist exists or may be
generated. As edible oils such as soybean oil may damage or warp the product, do not install
the product in the kitchen or near the kitchen table.
This may cause damage to the product.
18. When installing the product, be careful not to allow the surface of the product to be stained
with chemical substance.
Some chemical solvents such as cleaner or adhesives may cause serious damage to the
product’s surface.
19. If you install/disassemble the product in a manner that has not been recommended, the
production functions/performance may not be guaranteed.
Install the product by referring to “Installation & connection” in the user manual.
20. Installing or using the product in water can cause serious damage to the product.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus
Hanwha Techwin cares for the environment at all product manufacturing
stages, and is taking measures to provide customers with more environmentally
friendly products.
The Eco mark represents Hanwha Techwin's devotion to creating
environmentally friendly products, and indicates that the product satisfies the
EU RoHS Directive.
important safety instructions
English_9
● CONTENTS
contents
INTRODUCTION
10
10 Features
11 Components and Accessories
12 Overview
15 Lens
CONNECTION
18
18 Connecting to Monitor
18 Connecting to Power
19 Control via RS-485 Interface
20 To connect the Day & Night Input
20 To connect the Motion Detection
Output
21 Using Coaxial Communications
CAMERA OPERATION
22
22 Menu Configuration
22 Menu Setup
TROUBLESHOOTING
33
33 Troubleshooting
SPECIFICATIONS
34
34 Specifications
36 Dimension
10_ introduction
introduction
FEATURES
yHigh Resolution
It uses 4.1-megapixel CMOS device to provide a high-definition quality of 2560x1440
resolution.
yExcellent Sensitivity
The built-in high sensitivity COLOR CMOS produces a clear image.
- Color : 0.16Lux (F1.2, 1/30sec)
B/W : 0.009Lux (F1.2, 1/30sec)
yD-WDR
If an object has a large variance between bright and dark areas, it will keep bright
areas bright and make selected dark areas bright, so that the overall brightness can be
maintained.
yDay&Night
This camera has a function that automatically selects the mode that is appropriate for
daytime or night-time conditions. The COLOR mode operates in daytime conditions to
provide optimum colors, and B/W mode operates in night-time conditions to enhance
the definition of the image.
yDC Drive Lens Support
You can select Manual or DC Drive Lens from the menu.
yMiscellaneous Functions
HLC(High Light Compensation), REVERSE , SHARPNESS and PRIVACY functions are
provided.
yCommunication
Coaxial and RS-485 communication methods are supported.
- Coaxial Communications:
AHD : ACP (AHD Coax Protocol), CVBS : Pelco-C (Coaxitron)
- RS-485 Communications : SAMSUNG-T/PELCO-D/PELCO-P
yOSD
The camera’s OSD is complimented by 14 languages.
- English, Spanish, French, Portuguese, German, Italian, Russian, Polish, Czech,
Romanian, Serbian, Swedish, Danish, Turkish.
English_11
● INTRODUCTION
COMPONENTS AND ACCESSORIES
Check if the following items are included in the product package.
Camera
Quick Manual
Sheets lens mount
12_ introduction
introduction
OVERVIEW
Front View
❶
Tripod Mounting Bracket Screw Hole :
` Used to fix the camera on a bracket.
The screw sizes for this hole are as follows.
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard), or 0.178"
(ASA standard)
2
Lens adaptor : IInstall this if you use the lens.
3
Auto Iris Lens Connector : Used to connect Auto Iris Lens plug.
M
`Auto shutter adaptor, c-mount adaptor and supporting board are not provided with the camera.
Please check the installed documentation of tripod for the installation of cameras.
2
3
1
English_13
● INTRODUCTION
Rear View
POWER
VIDEO
➊
➌
➋
➍
➎
➏
➐
➑
<HCB-7000A>
<HCB-7000PHA>
POWER
VIDEO
➊
➋
➌
➍
➎
➏
➐
➑
14_ introduction
introduction
1
Function Setup switch
Display the menu on the screen and move the cursor to four directions to confi rm ststus or
after changing a selected item.
Switching between AHD and CVBS modes: Press the SET button for more than
5 seconds.
2
Power LED : This lamp is lit when the camera is receiving power normally.
3
Video OUT Terminal : Sends video signal and connects
to the Video IN port of a AHD DVR.
4
Power input terminal : Connect the designated power supplies.
(HCB-7000PHA : High Voltage Type)
5
RS-485 Control Port : You can control SETUP MENU through this port by using external
controllers like a Remote controller that RS-485 Communication
is supported.
6
D & N Input Port : You can switch to Day & Night Mode by connecting an external signal
to this port.
7
MD Output Port :
Motion detection signals are output through this port.
8
GND
Num Name I/O Direction
1 RS-485+ I/O
2 RS-485- I/O
3 IDN
4 OMD
5 -GND
External I / O port configuration
English_15
● INTRODUCTION
LENS
The lens is not supplied with this camera. Purchase a lens suitable for your environment.
This camera accepts the auto iris lens and both C-and CS-mount lens.
M
`
To use the functions of this camera effectively it is recommended that a DC type Auto Iris
lens is used.
` Keep the lens surface clean, if it becomes contaminated with dirt or fingerprints the picture
quality suffers.
When Using Auto Iris Lens
1. Remove the protective glass cover from
the front of the camera, and fasten the
auto iris lens by turning it clockwise.
2. After combining the lens, adjust the
focus.
3. If you cannot focus, insert one to three sheets (provided as accessories) between the camera and
the lens, and then reassemble and focus.
NEAR
TELE
M
e
g
a
P
i
e
x
English_17
● INTRODUCTION
yWhen Using a C-Mount Lens
1. Remove the protective glass cover at the
front of this product and turn the C-Mount
Adapter clockwise to install it.
2. Turn the C-Mount lens clockwise to
install it.
3. After combining the lens, adjust the
focus.
4. If you cannot focus, insert one to three sheets (provided as accessories) between the camera and
the lens, and then reassemble and focus.
C-Mount Adapter
C-Mount Adapter
C-Mount Adapter
C-Mount Adapter
18_ connection
connection
CONNECTING TO MONITOR
Refer to the following figure to connect monitors through DVR.
y As the connecting method varies with the instruments, refer to the manual supplied
with the instrument.
y Only connect the cable when the power is turned off.
M
`This product supports 2 video output formats of AHD, CVBS. The default is AHD. Select the
video output appropriate for your DVR.
CONNECTING TO POWER
You can connect power as shown in the following figure.not use
PO WER
VIDEO
REC HDD RMALA
NETWO BACKURK P
POWER
HCB-7000A
AHD DVR
Monitor
yFor AC / DC power
Since the power specification supports
both AC and DC, connect AC 24V, 500mA
Adaptor or DC 12V, 500mA Adaptor.
yHigh Voltage Type (AC230V, 50Hz)
Use AC230V, 50Hz power source For
HCB-7000PHA.
PO WER
VIDEO
POWER
VIDEO
<HCB-7000A>
<HCB-7000PHA>
connection
20_ connection
TO CONNECT THE DAY & NIGHT INPUT
Connect one strand of each signal line (2-strand) of the Illumination Sensor to the [DN] port,
and connect the other strand to the [GND] port.
yAlarm In Wiring Diagram
Sensor
GND
RESISTORDN (5mA SINK)
RESISTOR RESISTOR
VCC_3.3V
DIODE
GND
MLCC TRANSISTOR
External
connection
Inside of the camera
TO CONNECT THE MOTION DETECTION OUTPUT
If devices (e.g., flashing light and siren) that exceed the voltage and current specifications are
connected by using the open collector method, it may cause malfunction.
Refer to the connection diagram below when connecting devices that exceed the voltage and
current specifications.
yMD Alarm Out Wiring Diagram
Warning lamp
/ Siren power
Warning lamp /
Siren
(
-
) (
+
)
MD Alarm out (12VDC 20mA MAX)
RESISTOR 10K ohm
DIODE
RELAY
DC 5V or 3.3V
TRANSISTOR
GND
GND
TRANSISTOR
External connection Inside of the camera
GND
RESISTOR
English_21
● CONNECTION
Distance
Recommended Cable Specification
500m
5C2V Coaxial Cable
M ` It is recommended that pure copper coax cable is used and not copper coated steel, as
this will cause issues with the communication over the coaxial cable.
USING COAXIAL COMMUNICATIONS
y Coaxial Communications System
y OSD Control method
CAMERA DVR CONTROLLER
SET MENU/ENTER OSD KEY
UP UP KEY JOYSTICK UP
DOWN DOWN KEY JOYSTICK DOWN
LEFT LEFT KEY JOYSTICK LEFT
RIGHT RIGHT KEY JOYSTICK RIGHT
- Video Cable
The camera's video output port is connected to the monitor with a BNC coaxial
cable, shown below.
REC D MHD ALAR
NETWOR BACKUPK
POWER
22_ camera operation
MENU CONFIGURATION
MAIN SETUP
VIDEO FORMAT
◦ AHD ◦ CVBS
D-WDR
◦ OFF ◦ ON
WHITE BAL
◦ ATW ◦ INDOOR ◦ OUTDOOR
◦ MANUAL ◦
AWC SET→
EXPOSURE
◦ BRIGHTNESS ◦ LENS ◦ SHUTTER
◦ AGC ◦ DNR ◦ RETURN
BACKLIGHT
◦ OFF ◦ USER BLC ◦ HLC
SPECIAL
◦ DISPLAY ◦ COMM ADJ ◦ IMAGE ADJ
◦ DAY/NIGHT ◦ PRIVACY ◦ MOTION
◦ RETURN
EXIT
◦ SAVE ◦ NOT SAVE ◦ RESET
MENU SETUP
Use the Function Setup switch within the camera.
camera operation
POWER
VIDEO
Function Setup switch
<HCB-7000A>
English_23
● CAMERA OPERATION
1. Press the Function Setup switch.
yMain SETUP menu is displayed on the monitor screen.
2. Select a desired function using the Function Setup switch.
yPlace the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select ‘EXIT’ and press the Function Setup switch.
M
`An item with the icon also has sub menus. To select a sub menu, select an item
with the icon and press the Function Setup switch.
` An item with the --- icon is unavailable due to function settings.
VIDEO FORMAT
1. When the SETUP menu screen is
displayed, select ‘VIDEO FORMAT’ by
using the Function Setup switch so that
the arrow indicates ‘VIDEO FORMAT’.
2. Select a desired mode using the
Function Setup switch.
yThe video output can be selected
from AHD/CVBS.
M
`By pressing the function setting button for more than 5 seconds, you can change
the setting from AHD to CVBS. From CVBS, you can change it to AHD.
MAIN SETUP
1. VIDEO FORMAT AHD
2. D-WDR OFF
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
Change the status
using the Function
Setup switch.
Select the
function using
the Function
Setup switch.
MAIN SETUP
1. VIDEO FORMAT AHD
2. D-WDR OFF
3. WHITE BAL ATW
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
24_ camera operation
camera operation
D-WDR
If an object has a large variance between bright and dark areas, it will keep bright areas
bright and make selected dark areas bright, so that the overall brightness can be maintained.
1. When the SETUP menu screen is
displayed, select ‘D-WDR’ by using the
Function Setup switch so that the arrow
indicates ‘D-WDR’.
2. Use the Function Setup switch to
change the D-WDR level in the sub
menu according to the contrast
between bright and dark areas.
<D-WDR OFF><D-WDR ON>
White Bal (White Balance)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is
displayed, select ‘White Bal’ by using
the Function Setup switch so that the
arrow indicates ‘White Bal’ .
2. Select a desired mode using the
Function Setup switch.
Select one of the following 5 modes, as appropriate for your purpose.
yATW : Select this when the color temperature is between 1,800K and 10,500K.
yOUTDOOR : Use it in a color temperature range of 1,800K to 10,500K.(including
Natrium). Auto adjustment is made to optimize the camera color to the
outdoor environment.
MAIN SETUP
1. VIDEO FORMAT AHD
2. D-WDR OFF
3. WHITE BAL AT W
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
MAIN SETUP
1. VIDEO FORMAT AHD
2. D-WDR OFF
3. WHITE BAL AT W
28_ camera operation
camera operation
SPECIAL
1. When the SETUP menu screen is
displayed, select ‘SPECIAL’ by using
the Function Setup switch so that the
arrow indicates ‘SPECIAL’.
2. Select a desired mode using the
Function Setup switch.
yDISPLAY
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘DISPLAY’.
➋
Select a desired mode using the Function Setup switch.
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
yCOMM ADJ (Communication Adjustment)
:
This function sets up the camera
communication status when
controlling the camera through an
external control device.
➊
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘COMM ADJ’.
➋
Select a desired mode using the
Function Setup switch.
- PROTOCOL : Select the communication SAMSUNG-T/PELCO-D/PELCO-P
- CAM ID : Determines the camera's identification number (between 0 and 255).
- DISP ID: Determines whether camera ID is displayed or not.
- BAUD RATE : You can select 2400/4800/9600/19200/38400 bps .
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
- COAX : You can select whether to use COAX communication.
- RETURN : Return to the SPECIAL menu.
MAIN SETUP
1. VIDEO FORMAT AHD
2. D-WDR OFF
3. WHITE BAL AT W
4. EXPOSURE
5. BACKLIGHT OFF
6. SPECIAL
7. EXIT SAVE
COMM SETUP
▶
1.
PROTOCOL
SAMSUNG-T
2.
CAM ID
IIIIIIIIIIIIIIIIIIIII
1
3. DISP ID OFF
4.
BAUD RATE
9600
5.
UART MODE
8-N-1
6.
RET PKT
ENABLE
7.
COAX
ON
8.
RETURN
Produkt Specifikationer
| Mærke: | Wisenet |
| Kategori: | Overvågningskamera |
| Model: | HCB-7000A |
Har du brug for hjælp?
Hvis du har brug for hjælp til Wisenet HCB-7000A stil et spørgsmål nedenfor, og andre brugere vil svare dig
Overvågningskamera Wisenet Manualer
8 Marts 2025
8 Marts 2025
8 Marts 2025
8 Marts 2025
8 Marts 2025
8 Marts 2025
8 Marts 2025
8 Marts 2025
8 Marts 2025
8 Marts 2025
Overvågningskamera Manualer
- Overvågningskamera APC
- Overvågningskamera Feelworld
- Overvågningskamera Notifier
- Overvågningskamera Ernitec
- Overvågningskamera Aigis
- Overvågningskamera Smartwares
- Overvågningskamera Dorr
- Overvågningskamera Strong
- Overvågningskamera Kodak
- Overvågningskamera B & S Technology
- Overvågningskamera Genie
- Overvågningskamera Edimax
- Overvågningskamera V-TAC
- Overvågningskamera Abus
- Overvågningskamera Flamingo
Nyeste Overvågningskamera Manualer
4 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
31 Maj 2025
31 Maj 2025