Worx WG801 Manual

Worx Hækkeklipper WG801

Læs gratis den danske manual til Worx WG801 (28 sider) i kategorien Hækkeklipper. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Worx WG801, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/28

20V Cordless Shrub Shear & Grass Shear EN P02

Cisaille à gazon et arbuste sans ﬁl de 20 V F P11

Podadora de arbustos y césped inalámbrica 20V ES P19

WARNING: Some dust created by power

sanding, sawing, grinding, drilling and other

construction activities contains chemicals known to

the state of California to cause cancer, birth defects

or other reproductive harm. Some examples of these

chemicals are:

● Lead from lead-based paints;

● Crystalline silica from bricks and cement and

other masonry products;

● Arsenic and chromium from chemically-treated

lumber.

Your risk from these exposures varies, depending on

how often you do this type of work. To reduce your

exposure to these chemical: work in a well ventilated

area, and work with approved safety equipment,

such as those dust masks that are specially designed

to ﬁlter out microscopic particles.

WARNING: This product can expose you

to chemicals including lead and Di(2-

ethylhexyl)phthalate (DEHP) which are known

to the State of California to cause cancer and

birth defects or other reproductive harm. For

more information go to www.P65Warnings.

ca.gov.

WARNING: Read all safety warnings and

instructions. Failure to follow the warnings and

instructions may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1) WORK AREA SAFETY

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or

grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or

grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current

device (RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your ﬁnger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and gloves

away from moving parts. Loose clothes, jewellery

or long hair can be caught in moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

4) POWER TOOL USE AND CARE

a) Do not force the power tool. Use the

correct power tool for your application. The

correct power tool will do the job better and safer

at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

Produkt Specifikationer

Mærke:	Worx
Kategori:	Hækkeklipper
Model:	WG801

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WG801 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hækkeklipper Worx Manualer

8 December 2024

24 August 2024

24 August 2024

24 August 2024

24 August 2024

16 August 2024

8 August 2024

6 August 2024

30 Juli 2024

30 Juli 2024

Hækkeklipper Manualer

Nyeste Hækkeklipper Manualer

NEO Tools 04-627 Manual

10 Juni 2025

Lawn Star LSH 552 Manual

31 Maj 2025

Anova CG2360 Manual

3 April 2025

Makita BUM166 Manual

29 Marts 2025

Einhell GC-PH 2155 Manual

12 Januar 2025

Fieldmann FZN 1001-A Manual

12 Januar 2025

Echo HC-1500 Manual

7 Januar 2025

Turbo-Silent HS 5550 Manual

5 Januar 2025

DeWalt DCHT821 Manual

2 Januar 2025

Sun Joe 24V-HT16-LTE Manual

31 December 2025