Worx WX102L Manual

Worx Ikke kategoriseret WX102L

Læs gratis den danske manual til Worx WX102L (28 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Worx WX102L, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/28
20V Cordless Drill Driver EN
Perceuse/tournevis sans fil 20V F
20 Voltios taladro inalambrico ES
P02
P13
P20
2
WARNING: Some dust created by power
sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known to the State of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement
and other masonry products;
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
WARNING: This product can expose you
to chemicals including lead and Di(2-
ethylhexyl)phthalate (DEHP) which are known
to the State of California to cause cancer and
birth defects or other reproductive harm. For
more information go to www.P65Warnings.
ca.gov .
WARNING: Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewelry. Keep your hair and clothing
away from moving parts. Loose clothes,
jewelry or long hair can be caught in moving
parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly

Produkt Specifikationer

Mærke: Worx
Kategori: Ikke kategoriseret
Model: WX102L

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX102L stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Worx Manualer

Worx

Worx WX097L Manual

21 Juli 2025
Worx

Worx WG505E Manual

24 Marts 2025
Worx

Worx Landroid WA0865 Manual

25 Februar 2025
Worx

Worx WA3644 Manual

28 December 2024
Worx

Worx WX891L.9 Manual

20 November 2024
Worx

Worx WX891L Manual

20 November 2024
Worx

Worx WX094.9 Manual

2 September 2024
Worx

Worx MakerX WX741.9 Manual

2 September 2024
Worx

Worx MakerX WX743.9 Manual

2 September 2024
Worx

Worx WX891.9 Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Tefal

Tefal Lighted Mirror MR4015 Manual

20 August 2025
Stiebel Eltron

Stiebel Eltron CWM P Manual

20 August 2025
Globe

Globe XPH Manual

20 August 2025
Accucold

Accucold AWC2PB Manual

20 August 2025
Scheppach

Scheppach CSP5300 SE Manual

20 August 2025
AccuTemp

AccuTemp Evolution N61201D060 Manual

20 August 2025
Scheppach

Scheppach C-BSB74/1BE-X Manual

20 August 2025
Deye

Deye SUN-7.6K-SG02LP2-EU-AM2 Manual

20 August 2025
Scheppach

Scheppach Therbio Manual

20 August 2025
Krups

Krups Pulseo KB17GD Manual

20 August 2025