Yorkville Paraline PSA2S Manual

Yorkville Højttaler Paraline PSA2S

Læs gratis den danske manual til Yorkville Paraline PSA2S (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Yorkville Paraline PSA2S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Owner’s Manual

Manuel de L’Utilisateur

PSA2

A2s

Congratulations on your purchase of the PSA2s.

The PSA2s is a premium-quality integrated

subwoofer and power ampliﬁer. It has been

designed to be the perfect complement to our

Paraline Series PSA1 powered speaker.

The line-level position is for use when the PSA2s

is fed a signal from a processor, electronic crossover, the

output of an un-powered mixer, or the loop-through of a powered

speaker cabinet. When using the line-level mode, the use of balanced

¼-inch (Tip, Ring, Sleeve) and/or XLR cables will reduce the unit’s sensitivity

to hum and buzz.

The speaker level position should be used when the PSA2s is fed with a ¼-inch speaker cable

from the output of an ampliﬁer or a powered-mixer, or from the parallel connection on an un-powered

speaker cabinet. For speaker level operation, connect the PSA2s just like an ordinary speaker (in paral-

lel using the loop-through jacks) along with the passive full-range loudspeakers.

The PSA2s may be plugged in before or after the full-range loudspeaker. The PSA2s does not alter

the signal to the daisy-chained (thru) loudspeakers and will not draw any power from the host ampliﬁer/

processor driving them. Also, note that an external crossover is not necessary when using the PSA2s.

At high power levels when the limiter is operating, increasing the subwoofer level control will not

increase the output. For the best results, set the system so that the limiter LED occasionally (a few

times per second) lights up. The limiter is present in the circuit at all times to prevent distortion and

to prevent over-excursion of the speakers.

Note: The PSA2s’ built-in stand mounting adapter can be used with the Yorkville SW-TUBEHD

accessory to support either one or two of our PSA1 cabinets. The support tube can be used safely

as long as the PSA2s is on a ﬂat, level surface.

WARNING: Larger or heavier cabinets should NOT be used!

Produkt Specifikationer

Mærke:	Yorkville
Kategori:	Højttaler
Model:	Paraline PSA2S

Har du brug for hjælp?

Hvis du har brug for hjælp til Yorkville Paraline PSA2S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Yorkville Manualer

Yorkville EXM400 Manual

3 September 2025

Yorkville EXM Mobile Manual

3 September 2025

Yorkville C170P Manual

3 September 2025

Yorkville EXM MobileTower Manual

3 September 2025

Yorkville YSC-Mobile Manual

2 September 2025

Yorkville Paraline PSA26 Manual

25 August 2025

Yorkville Paraline PSA28 Manual

25 August 2025

Yorkville EXM Pro10 Manual

6 Februar 2025

Yorkville EXM Pro12 Manual

5 Februar 2025

Yorkville Synergy SA221S Manual

27 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Ibiza Sound SPLBOX200 Manual

15 September 2025

Mackie Thump15BST Manual

15 September 2025

Pioneer XPRS82 Manual

15 September 2025

Mackie CR8-XBT Manual

15 September 2025

Moonki MS-X265BT Manual

15 September 2025

Ibiza Sound LYRA400 Manual

15 September 2025

TVLogic RKM-356A Manual

14 September 2025

Ibiza Sound DJ350LED Manual

14 September 2025

Mackie HD1531 Manual

14 September 2025

Mackie MR5mk2 Manual

14 September 2025