ZLine ALP100WL-30 Manual
Læs nedenfor 📖 manual på dansk for ZLine ALP100WL-30 (104 sider) i kategorien Emhætte. Denne guide var nyttig for 12 personer og blev bedømt med 4.3 stjerner i gennemsnit af 6.5 brugere
Side 1/104
RANGE HOODS
Installation Guide and User Manual
1.0.1
Luxury should never be left desired - it’s meant to be attainable.”
- Andrew Zuro, Founder
Please register your ZLINE appliance to activate your
warranty. Begin the simple registration process by
scanning the QR code.
By registering your appliance, you will have access to:
• Technical Support
• Warranty Service
• Tracking your support inquiries
Registering Your Product
WARNING: This product can expose you to chemicals including
nickel, which is known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including
nickel, which is known to the State of California to cause cancer.
For more information, go to www.P65Warnings.ca.gov.
Carefully inspect all items for damages before accepting delivery. Customer
should note any damages on the freight bill or express receipt. Request the name
and signature of the carrier’s agent and keep a copy to support your claim. Upon
acceptance of items, owner assumes responsibility for its safe arrival. Report
damages to the carrier and file a claim immediately. Failure to do so may result in
the denial of your claim. The carrier will furnish you with necessary forms for filing a
claim.
Please inspect contents of package(s) carefully upon receiving them! We must be
notified of any damages and/or missing parts within (5) days upon your receipt of
package(s). Claims will not be accepted after (5) days.
NOTE: Items were thoroughly tested and carefully packed in our facility before
shipping. Products must be returned in good working condition with ALL original parts
and documentation packed in all original cartons, fillers and shipping cartons. A
restocking fee of 15% will be charged for all approved returns. Exchanges or returns
may not be accepted if any packaging is missing. Make certain to inspect the hood
for damages and defects before installation. Appearance flaws of the hood found
after installation and not affecting the hood’s performance is not covered under our
warranty for returns or exchanges. Service visits not covered under warranty will
carry a service charge.
Before installing your unit, please test the item(s) for proper functionality by plugging
it into the wall and testing the fan and lights. If unit does not work, please contact
customer service right away. Have a question? Call us at 1-614-777-5004.
Before Installation: Return for exchange or refund.
After Installation: No exchange or refund.
DISCLAIMER
IMPORTANT SAFETY INSTRUCTIONS 1
WALL RANGE HOOD INSTALLATION 4
WALL CROWN MOLDING INSTALLATION 9
DESIGNER WALL RANGE HOOD INSTALLATION 10
WALL CROWNSOUND® INSTALLATION 15
ISLAND RANGE HOOD INSTALLATION 17
DESIGNER ISLAND RANGE HOOD INSTALLATION 21
ISLAND CROWNSOUND® INSTALLATION 25
UNDER CABINET INSTALLATION 27
RANGE HOOD INSERT INSTALLATION 31
REMOTE BLOWER INSTALLATION 33
BUTTON/CONTROL PANEL OPERATION 35
HOW TO CHANGE PARTS 36
TROUBLESHOOTING AND FAQ 47
MOUNTING SPECIFICATIONS 54
TABLE OF CONTENTS
4
Wall Hood Installation
WALL HOOD INSTALLATION
Installation Tutorial Video
30”-36”36” Height 16”-max 31½”
9
Wall Crown Molding Installation
Installation Tutorial Video
If using a crown molding, follow instructions before attaching ducting and chimney
sections.
1. Attach crown molding bracket to ceiling using hardware provided.
2. Attach ducting and electrical connections.
3. Attach chimney sections to the range hood, then connect to crown molding
bracket.
4. Slide crown molding onto crown bracket and secure into place.
WALL CROWN MOLDING INSTALLATION
Screw
Scan Me
12
Designer Wall Hood Installation
DESIGNER WALL HOOD INSTALLATION
The recommended height to install your hood is 30˝ minimum and 36˝ maximum
above the cooktop. For Outdoor (304 Series) hood installation, the unit must be
installed at a minimum of 36˝ and a maximum of 42” above the grill.
1. Find the center of the wall where you are installing the hood. Make sure there
is sufficient bracing, such as wooden beams, to hold the weight of the hood.
Mark your center line and measure out from the center to find your two mounting
points. Make sure your mounting points are level when you mark them. It is
recommended to install the hood directly into wood supports. Figure 1
2. Mark the mounting points and install the two mounting screws provided leaving
the heads out ¼˝ to mount the hood. Figure 1
3. Mount the main body of the hood to the two screws and screw into place. Figure
2
4. Mount the crown molding bracket, centering it above the hood. Figure 3
Figure 1
Figure 2
C
D
Figure 3
13
Designer Wall Hood Installation
DESIGNER WALL HOOD INSTALLATION
5. Make your electrical and ducting connections. Try and minimize the use of
elbows. More elbows and longer runs create higher static pressure. The hood
comes with a grounded three prong plug that can be plugged into a 20amp.
circuit. The cord is 36” long. Figure 5
6. Install the transition piece securing it with screws provided.
7. Connect the ducting to the transition piece using foil-backed tape to hold it into
place. Attach the ducting to the range hood.
Figure 4 Figure 5
Screw
15
Wall CrownSound® Installation
WALL CROWNSOUND® INSTALLATION
ELECTRIC POWER RATING
Frequency: 110V/50 Hz
Power: 10W
1. Attach crown molding bracket to ceiling using hardware provided. Figure 1
2. Attach ducting and electrical connections. Plug the speakers into an outlet
behind the chimney. When the connection is successful, a chime will sound.
Figure 2
Figure 2
Figure 1
Installation Tutorial Video
Watch Now
25
Island CrownSound®d Installation
ISLAND CROWNSOUND® INSTALLATION
ELECTRIC POWER RATING
Frequency: 110V/50 Hz
Power: 10W
1. Attach crown molding bracket to ceiling using hardware provided. Figure 1
2. Attach ducting and electrical connections. Plug the speakers into an outlet
behind the chimney. When the connection is successful, a chime will sound.
Figure 2
Figure 2
Figure 1
Installation Tutorial Video
Watch Now
Screw: E
Screw: A/C/D
32
Insert Installation
INSERT INSTALLATION
When installing a range hood insert, it is recommended to install the unit at a
minimum of 30˝ from the cooktop. For outdoor range hood inserts it is recommended
to install the unit at a minimum of 36˝ and a maximum of 42” from the grill top.
1. Unpack contents of the hood. Attach transition piece and ducting to the top of
the range hood insert. Figure 1
2. Using L brackets and screws provided, attach L brackets to each side of the
insert.
3. Lift the range hood insert into cabinet or custom hood structure. Figure 2
4. Follow instructions for wall hood mount to mount the range hood.
NOTE: Due to some installation differences with custom hoods the L brackets may
not work. Before installing insert please determine if the insert will work for your
installation needs. You may pre-drill holes into the insert unit to accommodate for
custom hood installations.
Figure 2
Figure 3
Figure 1
Screw
Screw
Screws
35
Button/Control Panel Operation
OPERATION
Button functions
Power: Turn ON/OFF the range hood and activate power-off delay timer.
Light: Turn ON/OFF (Some models will have bright, dim, and OFF settings.)
Blower Speed Indicator: Shows current blower (motor) speed (1-4).
- Low Speed: Light frying/boiling.1
- Medium Speed: Frying/wok cooking/heavy boiling.2
- High-Grilling: Intensive frying and wok cooking.3
Adjusting the blower (motor) speed:
•Press the power button once to turn on the system.
•Press the speed buttons for the desired speed. May be increased and decreased.
•The blower speed indicator shows the blower speed level.
Adjusting the timer function:
•Turn the hood on at any speed and press the power-off delay button to enter timer
mode, a 3 flashes in the display, power-off delay digital timer will begin countdown.
•When the blower speed indicator reaches zero, the blower will shut down.
Adjusting the light:
•Turn ON/OFF (Some models will have bright, dim, and OFF settings.)
Button functions
Power: Turn ON/OFF the range hood and activate power-off delay timer.
Light: Turn ON/OFF (Some models will have bright, dim, and OFF settings.)
Blower Speed Indicator: Shows current blower (motor) speed (1-4).
- Low Speed: Light frying/boiling.1
- Medium Speed: Frying/wok cooking/heavy boiling. 2
- High-Grilling: Intensive frying and wok cooking.3
Adjusting the blower (motor) speed:
•Press the power button once to turn on the system.
•Press the speed buttons for the desired speed. May be increased and decreased .
•The selected blower speed will light up when chosen.
Adjusting the timer function:
•Turn the hood on at any speed and press the power-off delay button to enter timer
mode, The“power” flashes in the display, power-off delay will begin countdown. After
five minutes , the blower will shut down.
•When the blower speed indicator reaches zero, the blower will shut down.
Adjusting the light:
•Turn ON/OFF (Some models will have bright, dim, and OFF settings.)
Power
Power-Off Delay
Low Speed
Medium 1 Speed
Light
High speed
Medium 2 Speed
!
!
Power
Power-Off Delay
Low Speed
Medium 1 Speed
Light
High Speed
Medium 2 Speed
Blower Speed Indicator
37
Replacing the Circuit Board
CHANGING PARTS
HOW TO REPLACE THE CIRCUIT BOARD
1. Turn the power off at the breaker and unplug the Range Hood.
2. Remove all screws from the top of the circuit board cover.
3. Take a picture of the wiring layout (this will help you put the circuit board back
together properly).
4. Remove the wiring connected to the circuit board.
5. Remove the screws from the circuit board.
6. Replace the wiring and screws to reassemble the new circuit board per the
diagram below.
NOTE: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
Installation Tutorial Video
Scan Me
50
Troubleshooting
Troubleshooting
TROUBLESHOOTING
My hood is operating, but the air is moving slower than normal.
Check the filter for buildup and clean or replace it if needed. If the difficulty still
persists, check for obstructions in the ductwork. A common obstruction is buildup in
the roof or wall cap, such as: bird nests or other debris.
What is make-up air?
When the range hood ventilates the air out of the room, the air vented must be
replaced, this is called make-up air. We do not currently provide a make-up air unit.
NOTE: Always consult any applicable building codes in your area in regards to
minimum and maximum air flow rates. Certain states may require additional items
such as make-up air for larger CFM range hoods (typically over 300 CFM).
How do I order replacement parts?
Replacement parts can be ordered by contacting our customer service department at
1-614-777-5004. All hoods have a three year warranty on parts. Have your model
number or order number available when calling customer service.
How many devices can the Bluetooth speakers sync to at a time?
Only 1 device can sync at a time.
What is the decibel rating of the Bluetooth speakers?
Up to 100 decibels.
What is the range of the speakers? What’s the maximum distance for the connection
to work?
Up to 50 feet. If the connection is weak, move closer to the speakers or remove
obstacles that are between the device and the speakers.
“ZLINE Audio” won’t appear in the Bluetooth settings.
Check if the electrical connections are secure. A chime will sound if the connection is
successful. If “ZLINE Audio” still will not appear, call ZLINE at 1-614-777-5004 for a
replacement.
51
Troubleshooting
Troubleshooting
TROUBLESHOOTING
My range hood will not operate.
1. Check that there is power to the range hood. The most common issue is that the
circuit breaker is off or the fuse has blown.
2. Make sure the speed has been selected at the range hood controls.
3. Turn off the power to the range hood and check that all wires are properly
connected. Refer to your specific model’s installation instructions for proper
wiring.
My hood is making a rattling noise.
This is probably attributed to one of the following:
1. The motor is loose—Turn off the power and remove the filter and check that all
screws are secure and tight around the motor.
2. The duct work connection is loose—Turn off the power to the unit and check that
the ductwork connection to the pipe is tight. Add duct tape if necessary.
My range hood does not have power.
1. Check electrical connections.
2. Check that all connections to the circuit board are secure.
3. If problem still exists, please call our customer service line.
52
Troubleshooting
Troubleshooting
TROUBLESHOOTING
My range hood is not pulling.
• Was the unit plugged in and was the fan checked before installation?
• What distance is the hood mounted above the cook top?
• Indoor (30”-36”), outdoor (36”-40”)
• Is the range hood width the correct size for the cook top?
• Outdoor units should be at least 1 size larger, if not 2
• Does the hood have enough BTU output in relationship to either their gas or
electric stove cook top?
• BTU output per burner/100 - for gas
• Wattage output per burner/10 - for electric
• Are the baffle filters or mesh filters installed correctly? When were they last
cleaned?
• Is the ducting clear?
• Is the damper opening properly once the hood is turned on?
• Is there air coming off the top of the hood?
• Is there air coming out of the upper chimney section?
• When tissue is placed on the baffle filters under the hood, does it hold the tissue?
• How many elbows and how long is the ducting run?
• Should be no more than 2-3 elbows and no more than a 40 foot run
to exit, for every elbow subtract 5 feet
• Is the air recirculating? When were the carbon filters last changed?
• The carbon filters need changed every 3-6 months based on your
cooking habits.
58
476
476
Model Numbers A B C D
476-30
476-36 8 "
A
B
C
D
6 "
476-42
476-48 8 "
8 "
9 1116 " 13 516 "17
1116 "
9 1116 " 13 516 "17
1116 "
9 1116 " 13 516 "17
1116 "
9 1116 " 13 516 "17
1116 "
MOUNTING SPECIFICATIONS
59
477
477
Model Numbers A B C D
477-30
477-36 8 "
A
B
C
D
6 "
477-42
477-48 8 "
8 "
9 11
16 " 13 5
16 "17
11
16 "
9 1116 " 13 516 "17
1116 "
9 1116 " 13 516 "17
1116 "
9 1116 " 13 5
16 "17
11
16 "
MOUNTING SPECIFICATIONS
63
597-R
597-R
Model Numbers A B C D
597-R-30
597-R-36
A
8 "
597-R-42
597-R-48
B
C
D
15 3
16 " 9 9
16 " 11
11
16 "
8 "15 316 " 9 916 " 11
11
16 "
8 "15 316 " 9 916 " 11
11
16 "
8 "15 3
16 " 9 916 " 11
11
16 "
597-R-54
597-R-60
8 "15 3
16 " 9 9
16 " 11
11
16 "
8 "15 316 " 9 916 " 11
11
16 "
MOUNTING SPECIFICATIONS
68
685
685
Model Numbers A B C D
685-30
685-36
685-42
685-48
8 "
A
B
C
D
26
11
16 " 35 34 "19
116 "
8 "20
11
16 " 29 34 "19
1
16 "
8 "32
11
16 " 41 34 "19
116 "
8 "38
11
16 " 47 34 "19
116 "
MOUNTING SPECIFICATIONS
69
686
686
Model Numbers A B C D
686-30
686-36
686-42
686-48
8 "
A
B
C
D
26
1116 " 35 34 "19
1
16 "
8 "20
1116 " 29 34 "19
1
16 "
8 "32
1116 " 41 34 "19
1
16 "
8 "38
1116 " 47 34 "19
1
16 "
MOUNTING SPECIFICATIONS
75
8632
8632
8
8
Model Numbers A B C D
632-30
632-36
632-42
632-48
8 "
B
C
D
A
27 78 " 9 12 " 11 13 16 "
6 "27 78 " 9 12 " 11 13 16 "
8 "27 78 "
8 "
15 1116 " 18 "
27 78 " 15 1116 " 18 "
8
8
MOUNTING SPECIFICATIONS
76
8654
8654
MOUNTING SPECIFICATIONS
Model Numbers A B C D
654-30
654-36
654-42
654-48
8 "
6 "
8 "
8 "
B
C
D
A
17 116 " 9 58 " 13 516 "
17 116 " 9 58 " 13 516 "
17 116 " 9 58 " 13 516 "
17 116 " 9 58 " 13 516 "
MOUNTING SPECIFICATIONS
8
8
8
8
Produkt Specifikationer
| Mærke: | ZLine |
| Kategori: | Emhætte |
| Model: | ALP100WL-30 |
Har du brug for hjælp?
Hvis du har brug for hjælp til ZLine ALP100WL-30 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Emhætte ZLine Manualer
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
1 September 2024
Emhætte Manualer
- Emhætte Constructa
- Emhætte Weller
- Emhætte Thermex
- Emhætte Amica
- Emhætte Candy
- Emhætte Axiair
- Emhætte Lofra
- Emhætte Mepamsa
- Emhætte Thor
- Emhætte Euromaid
- Emhætte Piccante
- Emhætte Baumatic
- Emhætte Ardo
- Emhætte KKT Kolbe
- Emhætte Viali
Nyeste Emhætte Manualer
10 Juni 2025
10 Juni 2025
10 Juni 2025
10 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025
9 Juni 2025