Acer VG271S Manual

Acer overvåge VG271S

Læs gratis den danske manual til Acer VG271S (7 sider) i kategorien overvåge. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Acer VG271S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1. To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage

it.

3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.

4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of

any nature.

5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside

this range may result in permanent damage.

6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

7. Acer monitor is purposed for video and visual display of information obtained from electronic devices:

Attaching the monitor to the base

1. Remove the monitor from the packaging.

2. Attach the footstand to the base. (for selected models).

3. Turn clockwise to lock. Ensure that the base in locked onto the stand. (for selected models)

4. Secure the base to the stand by turning the screw using the intergrated tab or a suitable coin. (for selected models)

Connecting your monitor to a computer

1. Turn off your computer and unplug your computer's power cord.

2. Connect the signal cable to the HDMI (optional) and/or DP(optional)

input socket of the monitor, and the HDMI (optional) and/or

DP(optional) output socket of the graphics card on the computer.

3. Insert the monitor power cable into the power port at the back of the

monitor.

4. Plug the power cords of your computer and your monitor into a

nearby electrical outlet.

Note: Audio output is only for audio output model. Please check user

manual for more instruction.

AMD FreeSync Premium (HDMI/DP):

It can allow a AMD FreeSync Premium supported graphics source to dynamically adjust display refresh rate based on

typical content frame rates for power efcient, virtually stutter free and low-latency display update.

External controls

1 Power button Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power

saving mode.

2 Function key

a. Press to view Main page. Press again to enter hotkey1 function.

b. When the Function Menu is active, press this key to view the basic

information for your monitor and current input or reset the custom color

settings to the factory defaults.

English

3 Function key

a. Press to view Main page.Press again to enter hotkey2 function.

b. When the Function Menu is active, press this button to select scenario mode

or game mode .

4 Function key

a. Press to view Main page.Press again to enter Input select function.

b. When the Function Menu is active, this button will quit the OSD.

5 Function key

a. Press to view Main page.Press again to enter next function in the Function

Menu.

b. The single toggle button on the backside of the Display bezel operates like a

joystick. To move the cursor, simply toggle the button in four directions. Press

the button to select desired option.

Note: Acer monitor is purposed for video and visual display of information obtained from electronic devices.

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This device generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television reception, which can be

determined by turning the device off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and

other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS

Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting

of ecodesign requirements for energy-related product.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance

with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B

limits may be attached to this equipment. Operation with non-certied peripherals is likely to result in

interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user authority,

which is granted by the Federal Communications Commission, to operate this product.

In order to prevent damage to the monitor, do not lift the monitor by its base.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Notice: Canadian users

CAN ICES-3(B)/NMB-3(B)

Produkt Specifikationer

Mærke:	Acer
Kategori:	overvåge
Model:	VG271S

Har du brug for hjælp?

Hvis du har brug for hjælp til Acer VG271S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

overvåge Acer Manualer

15 Januar 2025

15 Januar 2025

13 Januar 2025

12 Januar 2025

30 December 2025

30 December 2025

Acer Predator XB273UGX Manual

6 December 2024

Acer ED320QRP3 Manual

6 December 2024

Acer V277bmix Manual

5 December 2024

Acer ED270X Manual

5 December 2024

overvåge Manualer

Nyeste overvåge Manualer

Philips 221V8LB Manual

4 April 2025

Philips 230V8 Manual

5 Marts 2025

ProDVX UW-24 Manual

5 Marts 2025

Asus ZenScreen MB166CR Manual

27 Februar 2025

Xiaomi Monitor G Pro 27i Manual

21 Februar 2025

LG UltraFine 27UP850K Manual

18 Februar 2025

Hollyland Pyro 7 Manual

11 Februar 2025

Ikan VXF7-HB Manual

11 Februar 2025

ELO Collaboration Tray Manual

11 Februar 2025

Iiyama ProLite TF5039AS Manual

11 Februar 2025