Acoustic Energy AE1 Active Manual


Læs gratis den danske manual til Acoustic Energy AE1 Active (7 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Acoustic Energy AE1 Active, eller vil du spørge andre brugere om produktet?

Side 1/7
OWNERS MANUAL
3
0
Y
E
A
R
S
I
N
B
R
I
T
I
S
H
A
U
D
I
O
-
3
0
Y
E
A
R
S
I
N
B
R
I
T
I
S
H
A
U
D
I
O
-
INTRODUCTION
Thank you for purchasing the Acoustic Energy AE1 Active loudspeaker. AE1’ is more than
a model number for Acoustic Energy. Our rst ever speaker wore the AE1 name and ever
since then, we have had a speaker in the range that is so called. The AE1 Active is the latest
speaker to wear the badge and takes the name in a dierent direction to its predecessors
while still embodying the traits and qualities that have made them so highly regarded.
This manual is intended to be a source of information about the speakers themselves and the
materials they are supplied with, oer some advice and hints about setting them up for the best
possible performance and provide some suggestions in the unlikely event you experience any
problems with the product. Please retain this document and all packaging for future use.
CONTENTS OF PACKAGING
The AE1 Active loudspeaker box contains the following items:
2 AE1 Active loudspeakers in transit bags
2 speaker grilles
2 IEC mains leads for mains connection
2 RCA interconnects (3 metre) for audio connection
8 isolating foam feet
1 pair of handling gloves
1 instruction manual
1 certicate of authenticity
If any of these items are not present, it would be best to immediately contact your dealer.
WHAT IS AN ACTIVE SPEAKER?
The AE1 Active diers from preceding AE1 models due to it being an active design but what
does this actually mean? An active speaker is a design where the amplication that provides the
power for the drivers is placed after the crossover - the device that determines what frequencies
are sent to what driver. By doing this, only the frequencies relevant to that particular drive unit
are amplied by an amplier that has been congured exactly for that task. The result is a speaker
that solves the balancing act of amplier, crossover and driver at the design stage without any
trial and error on the part of the owner and oers higher performance than a passive speaker of
the same basic size and design.
The AE1 Active combines the amplier and drivers into a single enclosure which has further
benets in terms of space eciency and packaging. The drivers have received no less attention.
The AE1 Active includes an all new Wide Dispersion Technology (WDT) tweeter. This incorporates
a waveguide into the tweeter surround that ensures that the tweeter interacts more eectively
with the room it is in. Higher frequency coverage is wider than it would otherwise be without
the waveguide while lower frequencies are narrowed at the same time. This is called constant
directivity and is something Acoustic Energy has been working on over the course of many years.
The result is that more of these frequencies reach the listener’s ear directly rather than reected
o other surfaces which increases eciency and reduces distortion.
The mid bass driver is no less sophisticated and builds on the vast experience that Acoustic
Energy has with metal drivers to create a driver that has extraordinary impact but not at the
expense of the transient speed and tonal accuracy required of a truly high performance
loudspeaker. The bass response of the AE1 Active is enhanced by the latest version of the
slotted bass port used on a number of our speakers. The slotted prole allows for a large surface
area that does not take up too much space on the speaker and also reduces the audibility of the
air passing through it.


Produkt Specifikationer

Mærke: Acoustic Energy
Kategori: Højttaler
Model: AE1 Active

Har du brug for hjælp?

Hvis du har brug for hjælp til Acoustic Energy AE1 Active stil et spørgsmål nedenfor, og andre brugere vil svare dig