Acoustic Research AW850 Manual

Acoustic Research Højttaler AW850

Læs gratis den danske manual til Acoustic Research AW850 (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Acoustic Research AW850, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Model AW850

Installation and

Operation Manual

Important Information

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

CAUTION

Caution: To reduce the risk of electric shock, do not remove cover (or back). No user

serviceable parts inside. Refer servicing to qualied service personnel.

Product Information

Keep your sales receipt to obtain warranty parts and

service and for proof of purchase. Attach it here and

record the serial and model numbers in case you need

them. These numbers are located on the product.

Model No.: ______________________________________

Purchase Date: __________________________________

Dealer/Address/Phone: ___________________________

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Clean only with dry cloth.

6. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers)

that produce heat.

8. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

9. Unplug this apparatus during lightning storms or when

unused for long periods of time.

10. Refer all servicing to qualied service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

Care and Maintenance

• Always use a soft cloth to clean the speaker and

transmitter. Never use any product containing alcohol or

other solvents as they may damage the surface.

• Use caution when plugging the power transformer in an

AC outlet to avoid the risk of electric shock.

• To clean the lantern/speaker: Shut off main power supply.

Wipe with damp cloth or use window cleaner. Do not use

abrasive cleaners.

• Bulb replacement: Replace with MAX 40W type B or

Listed 13W Self-Ballasted Compact Fluorescent Lamp

(candelabra-based bulb).

Warning: Do not use bulb-base adapters with this product.

This product must be used with candelabra-based bulbs

only.

Tour of the Speaker System

Lantern/Speaker

Bottom Panel

The bottom panel of the lantern/speaker is

protected by a rubber door. Find the tab on

the right side of the door and pull it down

gently to open.

Audio

source

DC IN

CHANNEL

1 2 3

R AUDIO L

Transmitter

(back panel)

Y-adapter

audio cable

WARNING: RISK OF INJURY

• Some metal parts in the xture may have sharp edges. To prevent cuts and scrapes, wear gloves when handling the parts.

• Account for small parts and destroy packing material, as these may be hazardous to children.

• Use ashlight or alternate light source to light work area during installation.

• Assistance may be required to support xture during installation.

• This apparatus must be installed in accordance with all applicable installation rules.

• This device must be connected to a mains socket outlet or outlet box with a grounded and protected connection.

• To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.

CAUTION: WIRING AND FIXTURE OPERATION

• Connect xture to supply wires rated for at least 90°C (194°F).

• Do not use xture on dimming circuits.

• Unit must be mounted higher than 60”.

WARNING

To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.

Only use attachments/accessories specied by the manufacturer.

Introduction

AR’s Outdoor Lantern and Wireless Speaker System puts a new twist on your outdoor

lighting: sound! The AW850 eliminates the hardest part of adding speakers to your

home—running and hiding hundreds of feet of speaker wire. The AR Wireless Speaker

System’s RF signal travels with ease through walls, oors, ceilings and other obstacles,

delivering high-quality sound and stylish décor. With drift- and static-free reception

along with outstanding range—up to 150 feet*—the possibilities for enjoying your AR

Wireless Speaker System are nearly unlimited. The AR Wireless Speaker System is

compatible with most audio sources, such as TVs, DVD players, VCRs, A/V receivers/

amps, stereos, computers, and portable devices (CD players, cassette players, MP3s

etc.).

This manual covers various connection options and detailed operating instructions for

making the AR Wireless Speaker System a valued part of your lifestyle. If, after having

reviewed the instructions, you have any questions, please call toll-free

1-800-732-6866 or visit www.araccessories.com.

*Range may vary according to environment.

Setting Up

Unpacking

Before you start installing the Outdoor Lantern and Wireless Speaker, make sure you

have the following parts in your package:

(1) Lantern/Wireless Speaker

(2) Wire

Connectors

(2) Mounting

Screws

(1) Mounting Crossbar

Mounting the Lantern/Wireless Speaker

Before you can use the Outdoor Lantern and Wireless Speaker, you must mount it to

an outlet box.

WARNING: Consult a qualied electrician in case the main supply wiring needs to be

checked or if you’re not certain how to install wiring. Always install wiring connections

in accordance with local code, ordinances, and the National Electrical Code.

Outdoor Lantern and

Wireless Speaker

(2) Caps

1. Make sure power is off for the outlet box at the main

circuit breaker.

2. Remove the old xture from the outlet box. Carefully

disconnect its wiring.

3. Mount the crossbar to the outlet box using the mounting

screws included in this package.

4. Unscrew the center screw on the crossbar and align the

two side screws so that they are level with each other. Then

tighten the center screw.

5. Find the copper ground wire coming from the wireless

speaker. Twist it together with the ground wire coming from

the outlet box.

If the outlet box doesn’t have a ground wire, attach the

ground wire to the mounting crossbar as shown here.

6. Strip 3/4” of insulation from the wire ends coming from

the speaker. Use pliers to twist the speaker’s stripped ends

together with the wires coming from the outlet box—make

sure you match black wire to black and white wire to white.

Then snip the ends.

7. Attach the wire connectors to the joined ends. If you’d like,

you can tie the connectors and ends together with electrical

tape.

Level

8. Place the wireless speaker onto the two side screws on the

crossbar. Secure the speaker onto the wall with the two caps

included in this package.

9. Use silicon caulking to seal the top and sides between

the speaker and the wall. Leave the bottom open so that

moisture can drain.

Connecting the Transmitter to an Audio Source

1. Plug the stereo plugs on the provided Y-adapter

audio cable into the AUDIO IN jacks on the back of

the transmitter (make sure to match the colors on

the plugs and jacks).

2. Plug the mini-plug end of the provided Y-adapter

into the headphone output of your MP3 player or CD

player (or audio output jack on your computer).

Transmitter (back panel)

120V AC

wall outlet

AC Power

Adapter

DC IN

CHANNEL

1 2 3

R AUDIO L

3. Connect the small, round plug from the transmitter

AC power adapter to the transmitter’s DC IN jack.

Plug the other end of the transmitter AC power

adapter into any standard 120V AC wall outlet.

Connecting to an A/V Receiver

You can also connect the transmitter to an A/V Receiver using the mini-jack to

RCA adapter included.

1. Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO

IN jacks on the back of the transmitter (make sure to match the colors on the

plugs and jacks).

A/V Receiver

Audio Output

DC IN

CHANNEL

1 2 3

R AUDIO L

Transmitter

(back panel)

Mini-jack to

RCA adapter

Y-adapter

audio cable

2. Plug the mini-plug end of the provided

Y-adapter into the mini-jack to RCA adapter.

3. Connect the stereo plugs on the mini-jack to

RCA adapter to the corresponding left and

right audio outputs of your A/V receiver,

amp, or other audio source.

(1) Transmitter

Power Adapter

(1) 3.5mm to

RCA Cable

(1) Transmitter

Note: This power unit is intended to be correctly oriented in a vertical or oor

mount position.

Note: There is no transmitter ON/OFF switch. The transmitter is designed to be

left plugged in and powered at all times. If you will not be using the AW850 for an

extended period of time, unplug the transmitter AC power adapter.

Installing/Changing the Lantern Light Bulb

The Outdoor Lantern and Wireless Speaker takes a candelabra-base bulb (40W max;

bulb not included). For best results, use a clear (non-frosted) 40W bulb. To install or

change the lantern’s bulb:

1. Use a small at tool (like a at-head screwdriver)

to open the top of the lantern’s front door.

2. Insert the bulb and screw it into the base.

3. Gently close the door until it snaps back into

place.

Important: Handle and dispose of uorescent bulbs

per manufacturer’s directions.

L/M/R switch determines if the speaker plays sound in mono as a stand-alone speaker,

or plays the left or right track in a stereo pair with an additional AW850

Music On/Off button turns the speaker on and off

Auto Scan button rescans for the transmitter’s signal

Volume +/– buttons adjust the volume level

Light On/Off switch turns the lantern on and off

Front Panel

Power/Linked indicator (not shown) blinks when the speaker is rst powered on; it turns

solid blue when the speaker is tuned to the transmitter

Warning: This product is designed to work with line level outputs or headphone

outputs only. DO NOT connect it directly to speaker outputs as it will permanently

damage the transmitter.

Ground

wire

(1) mini-jack to

RCA adapter

Produkt Specifikationer

Mærke:	Acoustic Research
Kategori:	Højttaler
Model:	AW850

Har du brug for hjælp?

Hvis du har brug for hjælp til Acoustic Research AW850 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Acoustic Research Manualer

Acoustic Research AW850 Manual

7 Juni 2025

Acoustic Research AWS63 Manual

7 Juni 2025

Acoustic Research ARS28i Manual

6 Juni 2025

Acoustic Research AWS6 Manual

6 Juni 2025

Acoustic Research AWSBT6 Manual

6 Juni 2025

Acoustic Research SP7V Manual

6 Juni 2025

Acoustic Research ARS50 Manual

4 Juni 2025

Acoustic Research AWS6B3 Manual

4 Juni 2025

Acoustic Research ARS2i Manual

4 Juni 2025

Acoustic Research AWSBTSK Manual

3 Juni 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Altec Lansing inMotion iM4 Manual

24 Oktober 2025

Vonyx VX822 Manual

21 Oktober 2025

Memphis Audio SRX42 Manual

19 Oktober 2025

Memphis Audio MS62 Manual

19 Oktober 2025

Madison MAD-CENTER120 Manual

19 Oktober 2025

Goji Mini GMINIG17 Manual

19 Oktober 2025

Audison VOCE AV 12 Manual

19 Oktober 2025

Memphis Audio VIV60CV2 Manual

18 Oktober 2025

Klipsch Reference Premiere RP-400C Manual

18 Oktober 2025

Klipsch KF-28 Manual

18 Oktober 2025