ACP Jetwave III DS1400E Manual

ACP Mikrobølgeovn Jetwave III DS1400E

Læs gratis den danske manual til ACP Jetwave III DS1400E (8 sider) i kategorien Mikrobølgeovn. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om ACP Jetwave III DS1400E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Quick Start Reference Guide

Refer to Product Safety Manual for Safety Statements

Complete Owner’s Manual available online

The switching operation of this

microwave oven can cause voltage

fluctuations on the supply line. The

operation of this oven under unfavor-

able voltage supply conditions can

have adverse effects. This device is

intended for the connection to a power

supply system with a maximum

permissible system impedance Zmax

of 1.1 Ohm at the interface point of

the user’s supply. The user has to

ensure that this device is connected

only to a power supply system which

fulfills the requirement above. If

necessary, the user can ask the public

power supply company for the system

impedance at the interface point.

So...how do I use it?

Manual Operation

To cook food using a specific entered time and power level.

1. Press Preheat On/Off pad to start the oven.

•Oven Preheating 450°F displays with Oven Preheating flashing.

(example of 450°F shown)

2. Oven reaches preheat temperature.

• Signal sounds and Ready 450°F displays. (example of 450°F shown)

3. Press Time Entry pad.

• Enter desired cooking time by using numeric keypad.

4. Press Temp Entry pad if cooking temperature differs from preheat temperature.

• Enter the new temperature.

5. Press Power Level pad.

• Press numeric key pad for desired level. Press numeric key pad again to

set power level to 100%.

• For a lower microwave power, press pads 1 (for 10%) through 9 (for 90%).

0 turns off the microwave power and cooking is by convection only.

6. If stage cooking is desired, press STAGE pad and repeat steps 3, 4, and 5.

• Up to 4 different stages can be programmed.

7. Press the Start pad to begin the cooking cycle.

Programming Items

1. Oven must be ON.

• Press Preheat On/Off.

•Oven Preheating 450°F displays with Oven Preheating flashing.

(example of 450°F shown)

2. Oven reaches preheat temperature.

• Signal sounds and Ready 450°F displays with Ready flashing.

(example of 450°F shown)

3. Press Program Save pad.

4. Press pad to be programmed or reprogrammed.

5. Press Time Entry pad to program amount of cooking time.

• The total microwave cooking time (all stages combined) is 20 minutes.

6. Press Temp Entry pad to program the cooking temperature.

• Enter desired temperature by using numeric pads.

7. Press Power Level pad to program level of microwave power.

• Press numeric key pad for desired level. Press numeric key pad again to

set power level to 100%.

• For a lower microwave power, press pads 1 (for 10%) through 9 (for 90%).

0 turns off the microwave power and cooking is by convection only.

8. Press Stage pad.

• Enter cook time, temp and power level as in steps 4. 5 and 6.

• To enter another cooking stage for that pad, press Stage pad again. Up to

four different stages can be programmed.

9. Press the Program Save pad to save the program and changes.

NOTE: To discard changes, press Stop/Reset pad before pressing Program

Save pad.

Programming

Preheat Setting

The factory default preheat setting

is 450°F (230°C). To program the

preheat setting oven must be ON:

1. Press Program Save pad.

2. Press Temp Entry pad.

3. Enter desired temperature by

using the numeric key pads.

4. Preheat temperature is changed.

Oven Wall Clearances

A—For North American (UL/CSA) models, allow at least 2” (5.1 cm) of clearance around top of

oven. For International (50 Hz) models, allow at least 7” (17,8 cm) of clearance around top of

oven. Proper air flow around oven cools electrical components. With restricted air flow, oven

may not operate properly and life of electrical parts is reduced.

B—Allow at least 2 9/16” (6,5 cm) between air discharge on back of oven and back wall.

C—Allow at least 1 1/4” (3 cm) of clearance around sides of oven.

Preprogrammed

Pads

To cook food using preprogrammed

cooking sequences.

1. Open oven door and place food

in oven. Close door.

2. Press desired pad.

3. Oven begins to cook.

4. At end of cooking cycle oven

beeps and shuts off.

No popcorn

Amana, Iowa 52204

Part No. 13092801

Printed in U.S.A. 05/07

For full product documentation visit:

www.amanacommercial.com

Quick Start Reference Guide

Refer to Product Safety Manual for Safety Statements

Complete Owner’s Manual available online

DO NOT power spray

Cleaning Teflon

Coated Oven

Cavity

• Wear protective rubber gloves when

cleaning oven.

• Use only a plastic utensil or nylon

scouring pad to aid in removing soil

or build-up from the oven interior.

• Do not use knife, metal utensil, or

steel wool pad to remove baked

on material. This will damage the

teflon coating.

• Refer to warranty for limitations

regarding teflon interior and

cleaning requirements.

Can I change an option?

Options such as single or double pad programming, beep volume,

and maximum cooking time can be changed to suit individual

preferences.

To change options oven STANDBY must display:

1. Press hidden pad.

• Pad is unmarked and located to the direct left of Preheat On/Off pad.

• Nothing will be displayed when hidden pad is pressed.

2. Press Program Save pad.

• The first user option will display. Oven is now in options mode.

3. Press number pad that controls option to be changed.

• See table below for options.

• Current option will display.

4. Press numeric pad again to change the option.

• Each time pad is pressed, option will change.

• Match code displayed with code for desired option.

5. Press Program Save pad to save changes.

• To change additional options, repeat steps 3 and 4.

• Changes take affect after Program Save pad is pressed.

• Press Stop/Reset to return to STANDBY, or open and close oven door.

Numbered Pads Display Options (Factory Settings in Bold)

Double Digit Entry

Disabled

Enabled

Allows 10 (0-9) preprogrammed pads.

Allows 100 (00-99) preprogrammed pads.

Manual Time Entry

Disabled

Enabled

Manual time entry/cooking not allowed

Manual time entry/cooking allowed

Reset on Door Open

Disabled

Enabled

Opening oven door does not reset oven back to ready mode

Opening oven door resets the oven back to ready mode

Keybeep

Disabled

Enabled

Keys do not beep when pressed (keybeep off)

Keys beep when pressed (keybeep on)

Keybeep Volume

OFF

LOW

MEDIUM

HIGH

Keybeep volume OFF

Keybeep volume LOW

Keybeep volume MEDIUM

Keybeep volume HIGH

End of Cook Signal

Solid Beep

3 Second Beep

4 Beeps Once

4 Beeps Repeating

Food done signal is a continuous beep until reset by user

Food done signal is a three second beep

Food done signal is four beeps, continuously.

Food done signal is four beeps, four times

Keypad Active

15 SECONDS

30 SECONDS

60 SECONDS

120 SECONDS

ALWAYS

Keypad time entry window is 15 seconds

Keypad time entry window is 30 seconds

Keypad time entry window is one minute

Keypad time entry window is two minutes

Keypad time entry window is always active

Preheat Warnings

Disabled

Program Temp

Cavity Temp

Both

Both temperature warnings off

Warning only when preheat temperature does not match preprogrammed temperature

Warning only when actual oven cavity temperature is not to preheat temperature

Both temperature warnings on

TEMP PAD

Temperature Scale

Degrees F

Degrees C

Temperatures are displayed in °F for 60 Hz models

Temperatures are displayed in °C for 50 Hz models

CLEAN FILTER

Message Frequency

Disabled

Weekly

Monthly

Quarterly

Oven will not display Clean Filter

Oven will display Clean Filter every seven (7) days

Oven will display Clean Filter every thirty (30) days

Oven will display Clean Filter every ninety (90) days

Produkt Specifikationer

Mærke:	ACP
Kategori:	Mikrobølgeovn
Model:	Jetwave III DS1400E

Har du brug for hjælp?

Hvis du har brug for hjælp til ACP Jetwave III DS1400E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrobølgeovn ACP Manualer

26 August 2025

26 August 2025

26 August 2025

26 August 2025

26 August 2025

26 August 2025

26 August 2025

26 August 2025

ACP Jetwave III DS1400E Manual

26 August 2025

ACP JET519V2 Manual

26 August 2025

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer

VOX MWH-MD50W Manual

26 August 2025

VOX MWH-MD50B Manual

26 August 2025

Avanti MT7V0W Manual

26 August 2025

Monogram ZES1227SLSS Manual

26 August 2025

Russell Hobbs RHMM715 Manual

26 August 2025

Sharp SMO1461GS Manual

26 August 2025

Continental Edison CEMO29BC Manual

26 August 2025

GE GCBK09N1WSS Manual

25 August 2025

Samsung C139STR Manual

25 August 2025

Russell Hobbs RHM1731G Manual

25 August 2025