ACTi E46A Manual
ACTi
Overvågningskamera
E46A
Læs gratis den danske manual til ACTi E46A (42 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om ACTi E46A, eller vil du spørge andre brugere om produktet?
Side 1/42
Bullet Camera
Hardware Manual
E44A, E45A, E A 46
2 6/06/ 01 21
www.acti.com
Hardware Manual
2
Table of Contents
Precautions 4
Safety Instructions 6...........................................................................
Introduction 7
List of Models .................................................................................... 7
Package Contents ............................................................................. 8
Physical Description 9........................................................................
Installation Procedures 10
Step 1: Insert the Memory Card (Optional) ................................... 10
Step 2: Mount the Camera .............................................................. 13
Step 3: Waterproof and Connect the Cable(s) .............................. 14
How to Use the Cable Gland ........................................................ 16
How to Use the Conduit Gland ..................................................... 19
Step 4: Connect to Network ........................................................... 23
Step 5: Access the Camera Live View ........................................... 23
Other Connections 24
How to Connect DI/DO Devices (Optional) ................................... 24
How to Connect Audio Input / Output Devices (Optional) ........... 28
Other Adjustments and Accessories 29
Adjust the Viewing Angle ............................................................... 29
Attach the Sunshield ...................................................................... 30
Reset the Camera ........................................................................... 32
How to Reset the Camera? .......................................................... 32
www.acti.com
Hardware Manual
3
Accessing the Camera 36
Congure the IP Addresses ........................................................... 36
Using DHCP Server to Assign IP Addresses ................................ 36
Using the Default Camera IP Address .......................................... 38
Access the Camera ......................................................................... 40
www.acti.com
Hardware Manual
4
Precautions
Read these instructions
Read all the safety and operating instructions before using this product.
Heed all warnings
Adhere to all the warnings on the product and in the instruction manual. Failure to follow the
safety instructions given may directly endanger people, cause damage to the system or to
other equipment.
Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Trademarks
ACTi and ACTi logo are registered trademarks of ACTi Corporation. All other names and
products used in this manual are registered trademarks of their respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local oce if you nd any inaccuracies or omissions. ACTi will not be held responsible for any
typographical or technical errors and reserves the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
5
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could vo authority to operate the equipment. id the user’s
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
www.acti.com
Hardware Manual
6
Safety Instructions
Cleaning
Disconnect this product from the power supply before cleaning.
Accessories and Repair Parts
Use only the accessories and repair parts recommended by the manufacturer. Using other
attachments not recommended by the manufacturer may cause hazards.
Water and Moisture
Install other devices (such as PoE injector, alarm, etc.) that will be used with the camera in a
dry place protected from weather.
Servicing
Do not attempt to service this product yourself. Refer all servicing to qualied service
personnel.
Damage Requiring service
Disconnect this product from the power supply immediately and refer servicing to qualied
service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the product.
3) If the inner parts of product have been directly exposed to rain or water.
4) If the product does not operate normally even by following the operating instructions in this
manual. Adjust only those controls that are covered by the instruction manual, as improper
adjustment of other controls may result in damage, and will often require extensive work
by a qualied technician to restore the product to its normal operation.
Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine if the product is in proper operating condition.
www.acti.com
Hardware Manual
7
Introduction
List of Models
This hardware manual contains the following models:
E44A
2MP Bullet with D/N, Adaptive IR, Basic WDR, SLLS, Vari-focal
lens
E45A
1MP Bullet with D/N, Adaptive IR, Superior WDR, Vari-focal
lens
E46A
3MP Bullet with D/N, Adaptive IR, Superior WDR, Vari-focal
lens
www.acti.com
Hardware Manual
8
Package Contents
Camera
Bracket Plate
Sunshield
Drill Template
Mounting Screw Kit
Sunshield Screw Kit
Conduit Gland
Cable Gland
Washer
Warranty Card
Quick Installation Guide
www.acti.com
Hardware Manual
9
Physical Description
Item
Description
1
Ethernet Port
Connects to a network using a standard Ethernet cable.
2
Audio Input
Connects to audio input devices, such as a microphone with
built-in amplier, etc.
NOTE 1: The microphone must have a built-in amplier.
Connecting an ordinary microphone will dwarf sounds and will
result in inaudible recording.
NOTE 2: If the audio connectors will not be used, leave the
rubber caps on to ensure cables remain waterproof and eliminate
short-circuit hazards.
3
Audio Output
Connects to audio output devices, such as a speaker, etc.
NOTE: If the audio connectors will not be used, leave the rubber
caps on to ensure cables remain waterproof and eliminate
short-circuit hazards.
4
Digital Input / Output
Connects to digital input or output devices, such as an alarm
trigger, panic button, etc. Digital Input (DI) and Digital Output
(DO) devices are used in applications like motion detection,
event triggering, alarm notications, etc. See How to Connect
DI/DO Devices (Optional) on page for information on how to 24
connect DI/DO devices to your camera.
www.acti.com
Hardware Manual
10
Installation Procedures
Step 1: Insert the Memory Card (Optional)
If there is a need to install a memory card for local storage recording, insert the memory card
to the camera rst before mounting the camera. Follow the procedures below:
1. Remove the three (3) screws securing the integrated bracket.
2. Detach the integrated body from the camera back cover.
3. Remove the clamping nut and rubber insert to loosen the cable within the gland.
NOTE: Connectors are connected inside the camera, be careful when pulling the rubber
insert from the gland.
www.acti.com
Hardware Manual
11
4. Twist to open the back cover and slowly lift the cover.
NOTE: Connectors are connected inside the camera, do not abruptly lift the cover.
5. Insert the memory card, with the metallic contacts facing down, into the slot until it clicks
into place.
6. Before closing the back cover, make sure the Ethernet cable connector is connected to the
main board. If the cable is disconnected, connect as shown below.
www.acti.com
Hardware Manual
12
7. Attach the back cover.
8. Push the rubber insert into the gland and attach the clamping nut.
NOTE: Make sure the clamping nut is tightly attached to ensure that the connection is
waterproof.
9. Attach the integrated bracket and secure the three (3) screws.
www.acti.com
Hardware Manual
13
Step 2 Mount the Camera :
1. Attach the bracket to the camera.
2. Mark the location of the screw holes based on the drill template included in the package.
NOTE: Depending on the surface where you will install the camera, it may be necessary to
drill three (3) holes and use the supplied screw tox.
3. Attach the camera to the surface using the three (3) supplied screws.
4. Adjust the camera installation angle and orientation, and then tighten the two (2) screws to
x its position.
www.acti.com
Hardware Manual
14
Step 3 Waterproof and Connect the Cable(s) :
The camera and the pre-installed network cable, “pigtail”, are resistant to salt, water, weak acid,
alcohol, oil, grease and other common solvents. However, users must ensure that the cable
connection and the network side cable itself are also protected from dierent environmental
factors.
First, ensure that the pre-installed cable (from the area boxed in blue up to the connectors) as
marked below is routed downwards at all times after the installation. See examples below:
For Ethernet connection, there are two waterproofing methods.
Bundled Accessory
Description
Cable Gland
Use this solution when connecting an Exterior-grade
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch or injector. See How
to Use the Cable Gland on page . 16
Conduit Gland
Use this solution when connecting a standard indoor
Ethernet cable between the camera and a
Power-over-Ethernet (PoE) switch / injector. A flexible
conduit (trade size 1/2”) is required to house the Ethernet
cable. See on page . How to Use the Conduit Gland 19
NOTE: The ex conduit is not included in the package
and must be purchased separately.
Audio and digital input/output devices can be connected to the camera, for more information,
see on page . Other Connections 24
CORRECT
CORRECT
WRONG
www.acti.com
Hardware Manual
15
Produkt Specifikationer
| Mærke: | ACTi |
| Kategori: | Overvågningskamera |
| Model: | E46A |
Har du brug for hjælp?
Hvis du har brug for hjælp til ACTi E46A stil et spørgsmål nedenfor, og andre brugere vil svare dig
Overvågningskamera ACTi Manualer
11 Januar 2025
11 Januar 2025
31 December 2025
29 August 2024
28 August 2024
24 August 2024
24 August 2024
24 August 2024
24 August 2024
21 August 2024
Overvågningskamera Manualer
- Western Digital
- Grandstream
- König
- xmartO
- APC
- Advantech
- Sonic Alert
- Videcon
- Hikvision
- M-e
- Bolin Technology
- Kogan
- Switel
- HP
- Y-cam
Nyeste Overvågningskamera Manualer
24 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
23 Juni 2025
22 Juni 2025