AcuRite 13003A2 Manual

AcuRite Ur 13003A2

Læs gratis den danske manual til AcuRite 13003A2 (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om AcuRite 13003A2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1- This device may NOT cause harmful interference, and

2- This device must accept any interference received, including interference that may cause undesired

operation.

Patent Pending

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmfuly interference ina residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modiﬁcations to this equipment. Such modiﬁcations could void the user authority to operate the equipment.

1 • OVERVIEW OF FEATURES

LIMITED ONE YEAR WARRANTY

Chaney Instrument Company warrants that all products it manufactures to be of good material and

workmanship and to be free of defects if properly installed and operated for a period of one year from date of

purchase. REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT

OF DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to breach the warranty

contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option,

be repaired or replaced by Chaney. In all cases, transporation costs and charges for returned goods shall

be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and

charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures

which shall have received normal wear and tear, been damaged, tampered, abused, improperly installed,

damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, AND ALL OTHER WARRANTIES ARE HEREBY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE

IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR

PURPOSE. CHANEY EXPRESSLY DISCLAIMS ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL

DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM ANY BREACH OF HTIS WARRANT. SOME

STATES DO NOT ALLOW THE EXCLUSIONS OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES,

SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS ALL

LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY

ACCEPTANCE OF ANY OF CHANEY’S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY

FOR THE CONSEQUENCES ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION

IS AUTHORIZED TO ASSUME FOR CHANEY ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS

PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO MODIFY OR WAIVE

THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN WRITING AND

SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

For in-warranty repair, please contact:

Customer Care Department

Chaney Instrument Company

965 Wells Street

Lake Geneva, WI 53147

Chaney Customer Care

877-221-1252

Mon-Fri 8:00 a.m. to 4:30 p.m. CST

www.chaneyinstrument.com

Please DO NOT return product to the retail store.

For technical assistance and product return information, please call

Customer Care: 877-221-1252 Mon. - Fri. 8:00 A.M. to 4:30 P.M. (CST)

www.chaneyinstrument.com

Snooze Bar

Intelli-Time®

Memory Battery

Compartment

(battery preinstalled

at factory)

Adjust UP

BACK OF ALARM CLOCK

TIME Set

Adjust UP

Set ALARM

TIME ZONE

Selection Switch

Alarm ON Indicator

PM indicator

-4- -1-

ALARM on/off

DST ON/OFF

INST - 13003A1 120610

Instruction Manual

Package Contents:

(1) Alarm Clock

(1) Instruction Manual

Alarm Clock

with Intelli-Time®

#13003A1

Tha clock features Intelli-Time ®

technology, which instantly sets the clock once the clock is plugged in. Please read this

manual in its entirety to fully enjoy the benets and features of this product. Please keep

this manual for future reference.

NOTE: A clear lm is applied to the display at the factory that must be removed prior to

using this product. Locate the clear tab and simply peel to remove.

Plug the AC power cord into a 110v AC power outlet.

About Intelli-Time

Your new alarm clock is equipped with Intelli-Time® technology which is pre-programmed

with the correct time and date. Intelli-Time® instructs the clock to set itself once batteries are

installed. The Intelli-Time® feature requires an internal memory battery to operate correctly.

This battery is located in the Intelli-Time® memory battery compartment on the bottom of

the clock and is pre-installed at the factory. We suggest replacement of the backup battery

every 5 years. We recommend the replacement of backup battery in 1-2 years if the unit is not

powered on for a long period of time. Do not replace the memory battery unless the clock is

plugged in and the display is operating with the correct time.

CAUTION: To prevent electric shock, do not use this plug with an extension cord, receptacle, or

any other outlet unless the blades can be fully inserted to prevent blade exposure.

WARNING: To prevent re or shock hazard, do not expose the alarm clock to rain or moisture.

Basic Clock Setup

After plugging in the clock, the clock will be set to the proper time for the default time zone

(EST). Next, you will need to select your time zone for the clock to display your correct time.

The time zone selection switch is located on the bottom of the alarm clock.

Another preference which may need to be set depending on your location is Daylight Saving

Time (DST). Certain areas do not observe DST, and you may need to disable the DST setting

(OFF). The DST selection switch is located on the back of the alarm clock.

Optional Custom Time Setting

If you wish to set the clock slightly ahead or slightly behind, or if the Intelli-Time

® internal

memory battery is allowed to go dead, you may set the time and date by simply following the

custom setup procedure below:

1. Press AND HOLD the “TIME SET” button for 3 seconds, then release. The HOUR will blink.

2. Press the “-” or “+” buttons to adjust the HOUR. Note the PM indicator.

3. Press and release the “TIME SET” button again to conrm your selection and move

on to setting the MINUTES.

4. Press the “-” or “+” buttons to adjust the MINUTES.

5. Press and release the “TIME SET” button again to conﬁrm your time setting and

move on to setting the calendar.

6. Set the Month, Date, and Year in the same manner the time was set.

7. Press and release the “TIME SET” button to exit custom time setting mode.

Notes: Auto return to normal time after 7 seconds of last button press.

Changing the Backup Battery

Do not change the backup batteries unless the unit is plugged in and powered. This will

prevent the clock from being without power, and the internal calendar memory will function

properly. When changing the backup batteries, remove the battery compartment cover on

the bottom of the unit by loosening the screw on cover. Replace the 1 “CR2032” 3V Lithium

battery with a fresh one and replace the cover. NOTE: the backup battery does not power

the display in the event of a power outage. The backup battery system provides power

to the internal clock and calendar for the IntelliTime® clock function when the unit is not

plugged in.

-2- -3-

2 • SETUP

3 • OPERATION

Alarm Clock Setting

1. To set the alarm time, press AND HOLD the “ALARM SET” button for 3 seconds,

then release. The HOUR will blink.

2. Press the “-” or “+” buttons to adjust the HOUR, note the PM indicator.

3. Press and release the “ALARM SET” button to conrm hour selection and move on

.to setting the MINUTES

4. Press the “-” or “+” buttons to adjust the MINUTES.

5. Press and release the “ALARM SET” button to conrm and exit alarm time set mode.

Notes: Auto return to normal time after 7 seconds of last button press.

Alarm Clock ON or OFF

To turn the alarm function on, slide ALARM switch to the “ON” position. A small

alarm clock indicator will appear on the display when the alarm function is switched

to the “ON” position. To turn OFF the alarm function completely, slide the ALARM

switch to the “OFF” position. This will prevent the alarm from sounding at all until

the switch is slid back into the “ON” position.

Alarm Clock SNOOZE function

Press the “SNOOZE” button to activate the 8 minutes snooze alarm.

Produkt Specifikationer

Mærke:	AcuRite
Kategori:	Ur
Model:	13003A2

Har du brug for hjælp?

Hvis du har brug for hjælp til AcuRite 13003A2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ur AcuRite Manualer

AcuRite 75127 Manual

16 August 2024

AcuRite 75102M Manual

16 August 2024

AcuRite 13239 Manual

15 August 2024

AcuRite 75065A2 Manual

15 August 2024

AcuRite 13041RM Manual

15 August 2024

15 August 2024

13 August 2024

13 August 2024

10 August 2024

10 August 2024

Ur Manualer

Nyeste Ur Manualer

Orient Contemporary ER1U002B Manual

9 Juni 2025

Orient Sports UG1X007B Manual

8 Juni 2025

Orient Sports UY07001D Manual

8 Juni 2025

Orient Classic RA-KA0007L Manual

7 Juni 2025

Orient Contemporary ER2G002B Manual

7 Juni 2025

Orient Contemporary UNA1003B Manual

6 Juni 2025

Orient Contemporary ER1Y001W Manual

6 Juni 2025

Orient Contemporary SZ3N009W Manual

6 Juni 2025

Swatch Climber SFK300G Manual

6 Juni 2025

Orient Contemporary UNG8003W Manual

6 Juni 2025