Advantech PCM-26R2EC Manual

Advantech Ikke kategoriseret PCM-26R2EC

Læs gratis den danske manual til Advantech PCM-26R2EC (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Advantech PCM-26R2EC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

PCM-26 Series Startup Manual 1

Before you begin installing your card, please make sure that

the following items have been shipped:

1. 1 x mini-PCI card with controller

2. 1 x I/O plate with iDoor bracket

3. 2 x Wired cable (25cm & 15cm) for PCM-26D1DB or

2 x Wired cable (20cm & 15cm) for PCM-26R2xx

4. 1 x Startup manual

5. 1 x Warranty card

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

The support documentation and drivers can be accessed

from Advantech/ Hilscher website.

• Documentation

- Datasheet

- StartUp

• Drivers

PCM-26D1DB 1-Port Hilscher netX100 FieldBus

mPCIe, PROFIBUS, DB9

PCM-26R2EC 2-Port Hilscher netX100 FieldBus

mPCIe, EtherCAT, RJ45

PCM-26R2EI 2-Port Hilscher netX100 FieldBus

mPCIe, EtherNet/IP, RJ45

PCM-26R2PN 2-Port Hilscher netX100 FieldBus

mPCIe, PROFINET, RJ45

Startup Manual

1. Insert the mPCIe card and lock the screw.

2. Unscrew and remove the blank expansion plate.

3. Insert the PCM module through the blank plate hole

and secure it with screws.

4. Connect the I/O Board to the mPCIe card using the

cable.

Enter the Advantech website, navigate to the technical

downloads section for your iDoor module and follow to the

instructions of the installation wizard, to install the driver.

cifX Driver Installation

Click Install cifX / netJACK Device Driver.

Packing List

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

For technical support and service, please visit our sup-

port website for PCM-26 series at:

This manual is for PCM-26 series.

Part No. 2041CM2600 Edition 1

June 2025

Documentation/Software Support

Embedded Computer Installation

Driver and Software Installation

2 PCM-26 Series Startup Manual

SYCON.net Installation

Run SYCON.net-Setup and follow the instructions of the

installation wizard.

Downloadrmwareandcongurationsoftware.Usethe

correspondingMasterDTMinthecongurationsoftware

SYCON.net.

1. CongureMasterDTMusingSYCON.net.RunSYCON.

netandsettheuserpasswordattherst-timelogin.

2. ConguringcifX(Master)

a.CongurethePCcardcifX(Master).

b. Double-click the icon.

3. Select the Driver

a. Click . Driver

b. Select and . CIFX Device Driver netXDriver

c. Click .Apply

Driver and Software Installation

(Cont.)

Firmware Installation (Cont.)

Firmware Installation

Produkt Specifikationer

Mærke:	Advantech
Kategori:	Ikke kategoriseret
Model:	PCM-26R2EC

Har du brug for hjælp?

Hvis du har brug for hjælp til Advantech PCM-26R2EC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Advantech Manualer

Advantech USB-4716 Manual

1 August 2025

Advantech PCE-7132 Manual

31 Juli 2025

Advantech ROM-DB5900 Manual

31 Juli 2025

Advantech RSB-3720 Manual

31 Juli 2025

Advantech AIMC-2000 Manual

31 Juli 2025

Advantech PPC-MB-610 Manual

31 Juli 2025

Advantech AIMB-286EF Manual

31 Juli 2025

Advantech PCIE-1751 Manual

31 Juli 2025

Advantech UTC-520J Manual

31 Juli 2025

Advantech WISE-2211 Manual

30 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman MiVue 540 Manual

2 August 2025

Pro User PSI2000TX Manual

2 August 2025

Guede 5T Manual

2 August 2025

Navman EZY40 Manual

2 August 2025

Thule Chariot Ski kit Manual

2 August 2025

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025