We have built a durable and reliable electric power tool for you.
Please read the instructions for use before first operation so you can handle your
power tool effectively and safely.
We are sure that buying an Electric Power Tool from AEG was the right choice!
DB2E 1500 DSB2E 1500
Connecting voltage 220–240 V 220–240 V 110 V. . . . . . . . . . . . . . . . . . .
50 Hz 50 Hz 50 Hz
Nominal power 1500 W 1500 W 1100 W. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
No-load speed
1st gear 0–1100 min-1 0 1100 min–-1 0 1100 min–-1
. . . . . . . . . . . . . . . . . . . . .
2nd gear 0–3000 min-1 0 3000 min–-1 0 3000 min–-1
. . . . . . . . . . . . . . . . . . . . .
Speed under load max.
1st gear 725 min-1 725 min-1 650 min-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2nd gear 2000 min-1 2000 min-1 1900 min-1
. . . . . . . . . . . . . . . . . . . . . . . . . . .
Percussion rate –48000 min-1 48000 min-1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drilling capacity in
1st gear 80– – –162 mm 80 162 mm 80 152 mm. . . . . . . . . . . . . . . . . . . . . . .
2nd gear 32– – –90 mm 32 90 mm 32 90 mm. . . . . . . . . . . . . . . . . . . . . . . . . .
Drill opening range – – mm 3 16 mm–. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Drive shank M18 M18 M18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chuck neck diameter 57 mm 57 mm 57 mm. . . . . . . . . . . . . . . . . . . . . . . . . .
Weight 3,3 kg 3,3 kg 3,3 kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JPlease pay attention to the safety instructions in the attached leaflet!
JDust that arises when working on material containing asbestos or stonework
containing crystalline silicic acid is harmful to the health. Please follow accident
prevention regulations.
JAlways wear goggles when using the machine. It is recommended to wear gloves,
sturdy non slipping shoes and apron.
JDo not pierce the motor housing as this could damage the double insulation (use
adhesives).
JAlways disconnect the plug from the socket before carrying out any work on the
machine.
Only plug-in when machine is switched off.
JKeep mains lead clear from working range of the machine. Always lead the cable
away behind you.
JAlways use the auxiliary handle.
JWhen drilling in walls ceiling, or floor, take care to avoid electric cables and gas or
waterpipes.
Typically the A-weighted noise levels of the tool are:
Sound pressure level = 102 dB (A). Sound power level = 115 dB (A).
Wear ear protectors! Measured values determined according to EN 50 144.
DB2E 1500: Typically the hand-arm vibration is below 2.5 m/s
2.
DSB2E 1500: Typically the weighted acceleration is 12 m/s
2.
Measured values determined according to EN 50 144.
Both the electronic drill DB2E 1500 as well as the electronic percussion drill DSB2E
1500 are specially designed for drilling with diamond dry core cutters.
Do not use this product in another way as stated for normal use.
Connect only to a single-phase AC current supply and only to the mains voltage
specified on the rating plate. Connection to sockets without earth protection is
possible as the appliance features protective insulation to DIN 57 740/ VDE 0740
and CEE 20. Radio suppression complies with the European standard EN 55014.
When fitting the plug, make sure that the brown (live) wire of this appliance is
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
