AEG WSE 800-125 Manual

AEG Ikke kategoriseret WSE 800-125

Læs gratis den danske manual til AEG WSE 800-125 (57 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om AEG WSE 800-125, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/57

WS 650-115, WS 715-115, WS 715-125,

WSE 800-125

Instruction for use

Please read and save these instruction

Gebrauchsanleitung

Bitte lesen und aufbewahren

Instruction d’utilisation

Prière de lire et de conserver

Istruzioni d’uso

Si prega di leggere le istruzioni e di conservarle

Instrucciones de uso

Lea y conserve estas instricciones por favor

Instruções de serviço

Por favor leia e conserve em seu poder

Gebruiksaanwijzing

Lees en let goed op deze advizen

Brugsanvisning

Vær venlight at læse og opbevare

Bruksanvisning

Vennligst les og ta godt vare på denne informasjonen

Bruksanvisning

Var god läs och tag tillvara dessa instruktioner

Käyttöohje

Lue ja sä öilyt

ENGLISH 2 WS 650-115, WS 715-115, WS 715-125, WSE 800-125

Introduction You demand the best and buy quality - quality provided by Atlas Copco. We have

built for you a reliable and lasting tool. Working effectively and without endangering

your health is only possible if this instruction for use is read carefully before first us-

ing the tool. We want to satisfy our customers and would like you to buy again AEG

Electric Power Tools from Atlas Copco.

Technical Data

Safety advice ■Please pay attention to the safety instructions in the attached leaflet!

■ Do not pierce the motor housing as this could damage the double insulation (use

adhesives).

■ Always disconnect the plug from the socket before carrying out any work on the ma-

chine.

■ Only plug-in when machine is switched off.

■ Keep mains lead clear from working range of the machine. Always lead the cable

away behind you.

■ Before use check machine, cable, and plug for any damages or material fatigue. Re-

pairs should only be carried out by authorised service agents.

■ Allow the machine to come to a stop before putting down.

■ Dust that arises when working in stones with crystalline silicic acid can damage your

health. Do not work on any material containing asbestos. Please note the safety reg-

ulations, VBG, of the employer’s liability insurance association.

■ Never reach into the danger area of the machine when it is running.

■ Always wear safety goggles and ear protectors when working with this machine. It

is further recommended to wear safety gloves, apron, as well as sturdy non-slipping

shoes.

■ Always use the additional handle.

■ Always use the protecting cap when roughing-down and separating.

■ Only use tools whose permitted speed is at least as high as the highest no-load

speed of the machine.

■ Check grinding tools before use. The grinding tool must be properly mounted and

turn freely. Perform a test run for at least 30 seconds without load. Do not use dam-

aged, out of round or vibrating grinding tools.

■ When grinding metal, flying sparks are produced. Take care that no persons are en-

dangered. Because of the danger of fire, no combustible materials should be locat-

ed in the vicinity (spark flight zone). Do not use dust extraction.

■ Due care should be taken that no sparks or sanding dust flying from the workpiece

come into contact with you.

■ Pay attention to the dimensions of the grinding disc. The mounting hole diameter

must fit the mounting flange without play. Do not use reducer pieces or adapters.

■ Never use a cutting disc for grinding. Do not subject cutting discs to side pressure.

■ When separating stone the guide shoe must be used!

Type WS 650- WS 715- WSE 800-

115 115 125 125

Nominal power (W) 650 710 710 800

Min. no-load speed (min-1 ) 2700

Max. no-load speed (min-1 ) 10000 10000 10000 10000

Grinding disk diameter (mm) 115 115 125 125

Thread of work spindle M14 M14 M14 M14

Weight (kg) 1,5 1,5 1,5 1,5

Speed control •

No-load speed limiter •

Produkt Specifikationer

Mærke:	AEG
Kategori:	Ikke kategoriseret
Model:	WSE 800-125

Har du brug for hjælp?

Hvis du har brug for hjælp til AEG WSE 800-125 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AEG Manualer

29 Juli 2025

10 Juli 2025

9 Juli 2025

9 Juli 2025

AEG FBB65707PM Manual

9 Juli 2025

AEG A9OOAFWM Manual

17 Juni 2025

AEG EWKEXT1 Manual

15 Juni 2025

AEG M9YHODB1 Manual

19 Marts 2025

AEG NKW8P21KAT Manual

11 Marts 2025

AEG A1WYHSK1 Manual

11 Marts 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025