AFX Mae MAEP20MBSNLW Manual

AFX lampe Mae MAEP20MBSNLW

Læs gratis den danske manual til AFX Mae MAEP20MBSNLW (1 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16 anmeldelser. Har du et spørgsmål om AFX Mae MAEP20MBSNLW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

MB door Luminaires Part #: MAEP20MBSNLW In

Pendant

120VAC / 60Hz

Page 1 of 1 8061353 R2

Limited Factory Warranty

This product is manufactured by AFX Inc. AFX Inc. hereby warranty that this xture is free from defects in materials and workmanship when installed and used under normal

operating conditions for a period of 5 years from date of shipment from factory. This warranty covers all component parts and extends only to replacement of defective xture

or components; it does not cover failure due to improper installation, misuse, mishandling or damage incurred in transit. For questions, please call AFX at 1- - - 800 873 2326.

Safety Precautions

 Read all safety precautions and installation instructions carefully before installing or servicing this xture. Failure to comply with these instructions could result in potentially fatal

electric shock and/or property damage.

 It is recommended that a qualied electrician perform all wiring. This xture must be wired in accordance with all national and local electrical codes.

 Do not handle any energized xture or attempt to energize any xture with wet hands or while standing on a wet or damp surface or in water.

 This xture is designed for use in a 120VAC circuit.

 Make sure that the power source conforms to the requirements of the xture. (See labels on the xture housing).

 To reduce the risk of electrical shock, and to assure proper operation, this xture must be adequately grounded. To accomplish proper grounding, there must be a separate ground

wire (green) contact between this xture and the ground connection of your main power supply panel.

 This xture is intended to be used for general indoor lighting in dry or damp locations.

Assembly Instructions

Step 1 Preparing for installation–

A. at fuse or circuit breaker box before installing or Disconnect electrical power

servicing any part of this xture.

B. Carefully remove the xture from the carton, remove components from

hardware kit.

C. Place mounting plate (1) over the junction box (not provided) and tighten with

two - screws (2) to secure it.#8 32

Wiring All wiring must take place inside junction box (not included) –

Caution: Make sure power is o at fuse or circuit breaker box. Check power

wires for damage or scrapes. Use wire suitable for at least 90°C (194°F). Note:

Most dwellings built before 1985 have supply wire rated to 60°C. Consult a

qualied electrician to ensure correct branch circuit conductor before installing.

Step 2 Wiring xture –

A. Make all wire connections to appropriate wire. Secure with wire nuts

(provided).

B. Connect green wire from the xture to the supply power source ground wire.

C. Connect the black wire from the xture to the black (L) wire from supply power

source.

D. Connect the white wire from the xture to the white (N) wire from supply power

source.

E. Pull on each wire lead to make sure connections are Do not mix wires.

secure. Make certain no bare wires are exposed outside of wire connectors.

Tuck all connections neatly into the junction box.

Step 3 Adjusting cord length (optional) –

A. Loosen cord strain relief screw (7) on bottom of canopy and pull the excess

cord through the top of the canopy ). Retighten screw when the cord is at (4

desired length.

B. Make a UL knot with the excess cord inside the canopy. Note: 9ft of cord

supplied.

Step 4 Mounting –

A. Install canopy (4) to mounting plate (1) by aligning both side holes together and

tighten two screws (3) to secure it.

Step 5 Lamping ot included) –(n

A. Install three E26 base type lamps under 60W max rating (5) into each socket

and twist clockwise until securely snug.

Step 6 Restore power at fuse or circuit breaker box–

Step 7 Maintaining shade –

A. Periodically dust the shade with a clean dry cloth. Wipe clean with a damp

cloth as needed. Never use abrasive cleaners.

Produkt Specifikationer

Mærke:	AFX
Kategori:	lampe
Model:	Mae MAEP20MBSNLW

Har du brug for hjælp?

Hvis du har brug for hjælp til AFX Mae MAEP20MBSNLW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

lampe AFX Manualer

AFX Mae MAEP20MBSNLW Manual

2 Januar 2025

AFX Callie CALP05WHLNR3 Manual

12 Oktober 2024

lampe Manualer

Nyeste lampe Manualer

NUVO Arabel 60/6967 Manual

4 April 2025

NUVO Gotham 60/191 Manual

4 April 2025

NUVO Cordello 60/7884 Manual

4 April 2025

NUVO Clarksville 60/8061 Manual

4 April 2025

NUVO Gotham 60/190 Manual

4 April 2025

Integral LED ILSTRGBWB028E Manual

4 April 2025

Trust Shyne 25483 Manual

3 April 2025

Trust Vybz GXT 904 Manual

3 April 2025

Schonbek Priscilla BC7106N-48PBZ Manual

2 April 2025

Bresser BR-7RGB Mini Tube Manual

2 April 2025