Aiphone IXW-HWCBP Manual


Læs gratis den danske manual til Aiphone IXW-HWCBP (4 sider) i kategorien Samtaleanlæg. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Aiphone IXW-HWCBP, eller vil du spørge andre brugere om produktet?

Side 1/4
IXW-HWCBP
Hand Wave Call Button and Surface Mount Box
IXW-HWCBP includes a touchless switch attached to a mounting plate, a PS-POE, and the SBX-2G/A
surface mount box. This device can be connected to any IX Series door station with a trigger input and a PoE
passthrough. It will place calls to the programmed station without having to touch the call button. The touchless
switch is powered by the PS-POE. The switch’s contact output will trigger a contact input on the door station. The
contact input will need to be programmed and assigned to a calling group. This instruction manual will show how
to connect the IXW-HWCBP to the door station and program the door station for contact input calling.
Wiring
1 of the IX Series door station. LAN 2 connects to the included PS-POE. Connect the power output of the
PS-POE to the red (+VDC) and black (Gnd) wires of the touchless switch. Connect the green (N/O) and yellow
(Common) wires of the touchless switch to contact input 1 on the IX Series door station (brown/blue wires on
CN2).
- Instructions -
Speci cations
Dimensions: 4-¹³ " H x 4- " W x 4" D
Package Contents
Qty 1 Panel with touchless switch
Qty 1 SBX-2G/A
Qty 1 PS-POE
Qty 4 speed nuts for panel mounting
Qty 4 screws for panel mounting
Qty 1 three-foot patch cable
Installation
1. Secure SBX-2G/A to wall
2. Connect included patch cable, power wires, and
a ground wire to PS-POE and place unit
inside the SBX-2G/A
3. Connect included patch cable to LAN 2 of IX
series door station
3. Connect touchless switch to input of IX series
door station and PS-POE
- Green (N.O.) to Brown (CN2 of IX-DV)
- Yellow (Common) to Blue (CN2 of IX-DV)
- White (N.C.) not used
- Red (+VDC) to + of PS-POE
- Black (GND) to - of PS-POE
4. Secure switch panel to SBX-2G/A
Back View
PoE+ Switch
Cat-5e / Cat-6
PS-POE
PoE IN
- +
N.C. (not used)
Red = +VDC
Black =Gnd
,;'9
IX-DV
IXW-HWCBP
If a PoE passthrough is
not available, connect
the PS-POE directly to
the PoE switch
Patch cable supplied
IXW-HWCBP Instr
0321
Aiphone Corporation
www.aiphone.com
tech@aiphone.com
800-692-0200
The rst step is to enable the contact input on the IX Series door station will connect to the
IXW-HWCBP. Open IX Support Tool and select the system to edit. Door stations can have up to 6
contact inputs. These instructions will show using contact input 1. In the upper left corner of the screen
click to switch from Station View Table View Station View to .
Enabling Door Station Option Input
1.1 - Option Input
Expand Option Input / Relay Output
Settings Option Input and click .
1.2 - Select a Station
Use the drop-down menu or click Next
to choose the station number of the door
station to be con gured. Click Select.
1.3 - Option Input / Name
Select using the Option Input 1
drop-down menu and assign a .Name
1.4 - Choose a Function
Select for this option input.Call
1.5 - Contact Settings
Select for the Make Type and
0 (Immediate) Detection Time for the
Range.
Click to Update
save your settings.
Programming
Aiphone Corporation
|
www.aiphone.com
|
tech@aiphone.com
|
(800) 692-0200
Page 2
For more details about the features and information above, please contact Technical Support.


Produkt Specifikationer

Mærke: Aiphone
Kategori: Samtaleanlæg
Model: IXW-HWCBP

Har du brug for hjælp?

Hvis du har brug for hjælp til Aiphone IXW-HWCBP stil et spørgsmål nedenfor, og andre brugere vil svare dig




Samtaleanlæg Aiphone Manualer

Samtaleanlæg Manualer

Nyeste Samtaleanlæg Manualer