Akyga AK-BC-01 Manual

Akyga Batterioplader AK-BC-01

Læs gratis den danske manual til Akyga AK-BC-01 (4 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 26 anmeldelser. Har du et spørgsmål om Akyga AK-BC-01, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AK-BC-01 - user manual

/ak-bc-01

www.akyga.com

>80%

Short description of the product

The product is compatible with the applicable national and European requirements.

What is in the box?

- AK-BC-01 battery charger

- Power cord

S explanation:ymbols

There is a risk of losing health or life (e.g. by electic shock).

There is a particular danger connected with service.

Important tips and information.

Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket

placed on the product means that the marked product can not be disposed of with other

household waste. After use, the product must be return to collection point for used electical and

electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent

processing, recovery or descrution contributes to avoiding negative effects on the environment

and health, and also allows the recovery of raw materials from which the product is made.

p. 1

The CE standard description on the product is the manufacturer's declaration that the marked

product meets the requirements of the directive so-called The "New Approach" of the European

Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change in

any way. In the reason of using the power supply for other purposes than those described, the

product may be demaged. The incorrect use may also cause hazard such as short-circuits,

burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product

could be share to third partie only with the user manual included.

The Akyga® AK-BC-01 microprocessor battery charger is used to simultaneous charging of up to 4

batteries with individual control of each cell The battery charger is compatible with Ni-MH AA (R6) and

AAA (R03) batteries. It has multifunctional LCD display which shows the status of each battery

separately and warns about placing the batteries in wrong polarity. It has also a set of protectors OVP,

OTP, OPP, SCP, OCP and additional safeguards to protect against: improper placement of the battery in

the charger, overcharging of the battery, overheating of the cells (60°C), placement of damaged or

incorrect cells and effects of short-circuit and overload.

The product is adapted to supply voltage in the range of 100-240V, 50/60Hz.

The power consumption of charging battery can not exceed the charger nominal current.

BOX

Ecological Solutions

GREEN

battery charger

The RoHS mark on the product is the manufacturer's declaration that the marked product meets

the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which

aims to reduce the amount of hazardous substances penetrating into the environment from

electrical and electronic waste.

AK-BC-01 - user manual

p. 2

Safety Precautions

WARNING! Product heats up during operation. To reduce the risk of burns or overheating the power

supply, do not place it in restricted ventilation area. Also, do not allow the working charger to touch soft

surface such as pillows, blankets or clothing. The battery charger meets the limits on the surface

temperatures available to the user, as defined in the International Standard for Safety of Information

Technology Equipment (IEC 60950).

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet . Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the batteries, abstain from touching electrical outlets, wires and

electonic circuits. The user’s contact with electronic components should be kept to a minimum.

The II protection class device. It provides protection against electric shock against direct and

indirect contact, and thanks to the additional isolation it is not necessary to connect the device

case with the protective earth conductor.

The device is intended only for domestic use, indoors.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

źKeep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

źIf the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

źProduct and power cord should not be touched with moist or wet hands under no

circumstances.

źShort-circuiting the current connection is prohibited.

źMake sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or

mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away

from heat sources (such as stoves, radiators, fireplaces).

źPower cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.

źIt is forbidden to modify the power cord. In the case of modifications, the cable may be

damaged, causing threats to life, health and property.

źIt is forbidden to charge other types of batteries than AA/AAA, because it can cause explosion,

electric shock and personal injury.

źBefore connecting the charger to the mains socket, make sure that the voltage specified on the

charger matches voltage supplied to the household socket.

źConnection of the charger to electricity is done by connecting added cable with the IEC C7 plug

to charger with IEC C8 connector and then connecting appropriate plug to grounded electrical

outlet.

źMains plug should be disconnect from power socket if the product is not in use for a long time.

źWhen disconnecting the power cord from the socket and from the device, do not pull on the

cord, but only on the part of the cable plug provided for this purpose.

battery charger

Produkt Specifikationer

Mærke:	Akyga
Kategori:	Batterioplader
Model:	AK-BC-01
Bredde:	68 mm
Dybde:	109 mm
Højde:	29 mm
Vægt:	156 g
Antal pr. pakke:	- stk
Velegnet til:	Husholdningsbatteri
Produktfarve:	Sølv
Pakkevægt:	239.2 g
Pakkedybde:	205 mm
Pakkebredde:	139 mm
Pakkehøjde:	45 mm
Husmateriale:	Acrylonitrilbutadienstyren
Kabler inkluderet:	Vekselstrøm
Pakketype:	Kasse
Certificering:	CE, FCC, REACH, RoHS
Strømkilde type:	AC, DC
Udgangsspænding:	1.2 V
Kabellængde:	0.5 m
Antal understøttede batterier:	4
Bæredygtighedscertifikater:	RoHS
Indgangsspænding:	110 - 240 V
Indgangsfrekvens:	50/60 Hz
Strømbeskyttelsesfunktioner:	Over power, Over voltage, Overcharge, Overheating, Short circuit
Kompatible batteri-teknologier:	Nikkel-Metalhydrid (NiMH)
Kompatible batteristørrelser:	AA, AAA