Akyga AK-CA-73 Manual

Akyga Computerbehuizing AK-CA-73

Læs gratis den danske manual til Akyga AK-CA-73 (7 sider) i kategorien Computerbehuizing. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Akyga AK-CA-73, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

AK-CA-73 - user manual

/ak-ca-73

www.akyga.com

Short description of the product

The product is compatible with the applicable national and European requirements.

What is in the box?

- AK-CA-73 Controller

- Molex / JST-PH 4-pin cord

- Remote control

Symbols explanation:

There is a risk of losing health or life (e.g. by electic shock).

There is a particular danger connected with service.

Important tips and information.

Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket

placed on the product means that the marked product can not be disposed of with other

household waste. After use, the product must be return to collection point for used electical and

electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent

processing, recovery or descrution contributes to avoiding negative effects on the environment

and health, and also allows the recovery of raw materials from which the product is made.

p. 1

The CE standard description on the product is the manufacturer's declaration that the marked

product meets the requirements of the directive so-called The "New Approach" of the European

Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change in

any way. In the reason of using the power supply for other purposes than those described, the

product may be demaged. The incorrect use may also cause hazard such as short-circuits,

burns, electric shocks, etc. Read the users manual carefully and keep it for later use. The product

could be share to third partie only with the user manual included.

The Akyga AK-CA-73 controller is used to control up to ten fans and two LED strips. Control is carried out

using the included remote control, which allows you to select visual effects and change the operating

parameters of fans according to individual needs. In addition, the controller is compatible with JST 6-pin

fans and addressable LED strips with JST 4-pin connectors.

The product is designed for a DC voltage of 5 V/12 V from the Molex socket of an ATX power supply. The

current consumption of the supplied devices must not exceed the current indicated on the controller.

LED fan controller

Ecological Solutions

GREEN

RF 433,92 MHz

AK-CA-73 - user manual

p. 2

Safety Precautions

Connecting computer components whose demanded power is greather than power of the controller,

can cause damage (burn) of controller.

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet. Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the controller or devices connected to it, abstain from touching

contacts, wires and electonic circuits. The user’s contact with electronic components should be

kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

źThe product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

źShort-circuiting the current connection is prohibited.

źIf the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

źMake sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or

mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away

from heat sources (such as stoves, radiators, fireplaces).

źIt is not allowed to put any objects inside the controller.

źTake account of the user manual for other devices connected to the adapter.

źThe controller is connected to the power by plugging it into the Molex connector of an ATX

power supply unit providing 5 V/12 V DC.

źBefore connecting the adapter to the power supply, make sure that the power of the adapter is

sufficient for the components in the computer.

źProduct and power cord should not be touched with moist or wet hands under no

circumstances.

źKeep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

źIt is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

LED fan controller

The controller should work in internal conditions that do not cause contact with water and direct

sunlight.

During operation, the controller should be located in a designated housing.

The RoHS mark on the product is the manufacturer's declaration that the marked product meets

the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which

aims to reduce the amount of hazardous substances penetrating into the environment from

electrical and electronic waste.

The device is intended only for domestic use, indoors.

Produkt Specifikationer

Mærke:	Akyga
Kategori:	Computerbehuizing
Model:	AK-CA-73
Type:	RGB-controller
Dybde:	16 mm
Højde:	92 mm
Vægt:	62 g
Produktfarve:	Sort
Pakkevægt:	66 g
Pakkedybde:	174 mm
Pakkebredde:	245 mm
Pakkehøjde:	17 mm
Driftstemperatur (T-T):	5 - 60 °C
Materiale:	Syntetisk ABS
Lampetype:	LED
Fjernbetjening inkluderet:	Ja
Kabellængde:	0.28 m
Nem at installere:	Ja
Fjernbetjent:	Ja
Tykkelse:	45 mm
Stik 1:	Molex
Stik 2:	JST-PH 4-pin
Stativ-montering:	Ja
Kompatibel kabinettype:	Universel
Antal understøttede ventilatorer:	10
Passende til rumtype:	Computerkabinet
Magnet:	Ingen
Let at montere:	Ja
Magnetisk beslag:	Ingen