Alpine R2-W8D2 Manual

Alpine Subwoofer R2-W8D2

Læs gratis den danske manual til Alpine R2-W8D2 (4 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Alpine R2-W8D2, eller vil du spørge andre brugere om produktet?

Side 1/4
R/S-DB8V-TRK Truck Enclosure Installation Manual
Compatible with the following models:
R2-W8D2
S-W8D2
Introduction
Congratulations on purchasing this truck enclosure. This installation manual is designed to take you through the step-
by-step installation of the ‘R’ or ‘S’ Series Dual 8” Subwoofer Vented Enclosure for Trucks. Please familiarize yourself
with the owners manual and if you still have additional questions please contact our support team at 1-800-TECH-
101.
Note: To ensure safe use, Always follow these precautions.
The installation of this product requires specialized skills and experience. We recommend that you have the product
installed by an Alpine authorized dealer.
Before you use this product, be sure to carefully read this installation manual so that you can use the product
correctly, Failing to do so could lead to damaged equipment or an accident. Alpine Electronics bears no responsibility
for problems that arise as a result of failure to follow the instructions in the manual.
Make sure enclosure is secured to the vehicle. Failing to do so can lead to electric shock, injury or damage to
equipment.
When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring,
and the like. This kind of damage could lead to an accident or fire.
Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust.
Doing so could lead to fire or damaged equipment.
Start all screw threads by hand and avoid overtourqing screws, failure to do so may damage your equipment.
Matching Alpine mono ampliers are sold separately - check with an Alpine authorized dealer.
Recommended Amplifier settings
R-A75M amp S-A60M amp
Gain=1 o’clock position
LP Filter=70Hz
Bass EQ=0 (Off)
Subsonic Filter=30Hz
Gain=1 o’clock position
LP Filter=70Hz
Bass EQ=0 (Off)
(Note: If available with your HU/DSP -
We recommend a Subsonic lter, if possible
with Fc=30Hz @-24dB/Oct.)
7 Align front cover and trim bars, then install with
supplied M5x20mm screws (4pcs, 4mm hex drive).
Front cover
Trim bars
Recommended configuration for specific vehicles
Table 1: Recommended vehicle settings
Vehicle Width Inner Foot Outer Foot
(front)
Outer Foot
(rear) Amp Tray Notes
2015+ F-150 51” (max) yes yes yes yes
2018+
Silverado/Sierra 51” (max) yes yes yes yes
2007+ Wrangler 40” (min) no yes yes no
Remove inner
foot and install in
outer location
2018+ RAM 51” (max) yes yes no yes


Produkt Specifikationer

Mærke: Alpine
Kategori: Subwoofer
Model: R2-W8D2

Har du brug for hjælp?

Hvis du har brug for hjælp til Alpine R2-W8D2 stil et spørgsmål nedenfor, og andre brugere vil svare dig