Altair Kerta 52167-BAT-GR-BB Manual

Altair Badekar Kerta 52167-BAT-GR-BB

Læs gratis den danske manual til Altair Kerta 52167-BAT-GR-BB (6 sider) i kategorien Badekar. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Altair Kerta 52167-BAT-GR-BB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Parts List

No. Part Name Qty (pcs) Pic

A Bar 4

B Screw 4

C Nut

12 (8 pcs pre-assembled on

tub)

D Washer

12 (8 pcs pre-assembled on

tub)

E Fastener washer 4

Adjustable metal

feet

TOOLS REQUIRED

Step 1

* Turn over the tub on soft surface to make sure it is protected from scratches.

* Take off the plastic covers of screws and unscrew nuts and washers from the

tub(pre-assembled on the tub).

* Place the bars on the tub, position washers and screws, then fix the screws

but not tighten them, because the bars could be adjusted during assembling.

Important:

* Two people are required for installation.

* Freestanding tub is not designed to take weight on the rim.

Do not sit or stand on the tub rim.

Altair Inc.

Do not tighten the

screws before

adjustment.

Please retain this manual after installation for future reference and

maintenance

Product must be installed in compliance with relevant Water

Bylaws

The Product is CUPC certified

Original certification model Code: DM1003-1.7 File No. 10288

Adjustable Wrench

Adjustment

space

52167-BAT-GR-BB

Step 2

Cleaning & Maintenance:

* Position the feet on the bar, fasten with washers, fastener washers and screws, A) To preserve the polished surface, after using your tub, clean with soft

but not tighten screws right away. cloth and warm soapy water to wash away any body oils or soap residue

* Adjust the feet to match the shape of the tub, bars could be adjusted if needed. that forms a ring tide mark.

* Hold the feet firmly when tightening all screws, the feet must be secured fully to B) Do not use powders, pastes, crème cleaners, thinners, window cleaning

prevent any movement. sprays or dry cleaning liquid, etc.

C) When coloured essentials oils are used, first test that the colour won't

stain your tub. Always add oils into a tub full of water. Never pour them

into an empty tub.

* Pay attention to below points if the tub is designed with tap deck.

* The tap holes are not pre-drilled on the deck, drill holes according to your need.

* Check and siliconed the tap holes to make sure the reinforcement layer holes are

solid before installing the faucet.

Step 3

* Check and make sure that there is no water leakage at the faucet.

* Assemble the overflow and waste. Connect the tub trap (not supplied with the tub)

to the fitted tub waste and connect that to the bathroom's waste pipes.