Alto TS110A Manual

Alto Højttaler TS110A

Læs gratis den danske manual til Alto TS110A (8 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Alto TS110A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

QUICKSTART GUIDE

ENGLISH

GUÍA DE INICIO RÁPIDO

ESPAÑOL

GUIDE D'UTILISATION RAPIDE

FRANÇAIS

GUIDA RAPIDA

ITALIANO

SCHNELLSTART-ANLEITUNG

DEUTSCH

SNELSTARTGIDS

NEDERLANDS

BOX CONTENTS

• TRUESONIC speaker

• Power cable

• Quickstart Guide

• Safety Instructions & Warranty Information Booklet

CONNECTION DIAGRAM / INSTALLATION

REAR PANEL OVERVIEW

1. POWER INPUT – Connect the included power cable to

this input and connect the other end of the cable to a

power source. Make sure the speaker's POWER

SWITCH is set to "off" when plugging and unplugging

the cable.

2. POWER SWITCH – Turns the speaker on/off. Make

sure the VOLUME knob is set to "zero" before turning it

on.

3. POWER LED – Illuminates when the speaker is on.

4. VOLUME – Turn this knob to adjust the speaker's

volume.

5. INPUT – Use a standard 1/4" TRS or XLR cable (not

included) to connect your sound source to this input.

6. MIX OUT – Use a standard XLR cable (not included) to

connect this jack to the input of another speaker (i.e.,

another TRUESONIC speaker).

7. SIGNAL LIMIT LED – Illuminates when the audio

signal being sent to the speaker is "clipping" or

distorting. If this light illuminates frequently or steadily,

reduce the volume of your sound source.

8. CONTOUR – Engage (depress) this switch to

emphasize low and high frequencies by +3 dB. Disengage the switch for flatter response for live

performance or for maximum output.

9. GROUND SWITCH – Press this switch to reduce hum or noise.

*Note: Microphones, mixer, and cables are not included.

Mixer*

Power

Microphones*

Speaker Speaker

Eyebolt

Dust cover

Suspension

point

Example:

INSTALLATION:

This speaker should be installed on a

stand on the floor, according to its

maximum weight, or suspended from its

suspension points (M10 x 1.5PH, 30mm

length) (see example image). We do

NOT recommend suspending multiple

speakers in a vertical array.

4 4

5 5 6

Produkt Specifikationer

Mærke:	Alto
Kategori:	Højttaler
Model:	TS110A
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	330 mm
Dybde:	298 mm
Højde:	513 mm
Vægt:	13500 g
Produktfarve:	Sort
Udgangseffekt (RMS):	300 W
Equalizer:	Ingen
Volumenkontrol:	Dreje
Anbefalet brug:	Universel
Frekvensområde:	53 - 20000 Hz
Impedens:	- ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Højttaler, type:	2-vejs
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Gulv
LED-indikatorer:	Ja
Strømkilde type:	Vekselstrøm
Diskanthøjttaler:	Ja
Peak Music-Udgangseffekt (PMPO):	600 W
Delefrekvens:	2500 Hz
AC (strøm) indgang:	Ja
Magnet-type:	Neodym
Diskant diameter:	1.5 "
Bashøjttaler:	Ja
Woofer diameter:	254 mm
Forstærker klasse:	D
Woofer diameter (britisk mål):	10 "
XLR indgang:	Ja