Amazfit Bip 6 Manual
Amazfit
Ikke kategoriseret
Bip 6
Læs nedenfor 📖 manual på dansk for Amazfit Bip 6 (35 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 3.6 stjerner i gennemsnit af 3.5 brugere
Side 1/35
1
Amazfit Bip 6 User Manual
Connection and pairing
Use your phone to scan the QR code in the manual or on the device, and download
and install the Zepp app. For a better user experience, update the app to the latest
version as prompted.
Note: The operating system of your mobile phone must be Android 7.0 or iOS 14.0,
or later.
Initial pairing:
When the device is started for the first time, the QR code used for pairing will be
displayed on the screen.
Open the Zepp app on your phone, log in to the app, and scan the QR code
displayed on the device to pair your phone with the device.
Pairing with a new phone:
1. Open the app on your old phone and synchronize data with the device.
2. On the old mobile phone, go to Device > Amazfit Bip 6 page and tap the
Unpair button at the bottom to unbind. If it is an iPhone, after unbinding in the Zepp
app, you need to unpair the phone and device. Go to Settings > Bluetooth, find the
Bluetooth name corresponding to the device, and tap the button on the far right of the
Bluetooth name. After entering the page, tap Ignore This Device.
3. Restore the factory settings of the device and then pair it with your new phone
as if it is paired for the first time.
2
Updating the system of your watch
Keep the device connected to your phone, open the Zepp app, go to Device >
Amazfit Bip 6> General> System Update> System Update to view or update the
system of your device.
We recommend that you tap Update Immediately when your device receives a
system update message.
Wearing
1. Wear the watch strap not too tight or too loose, and leave enough space for the
skin to breathe. This makes you feel comfortable and allows the sensor to function.
2. When measuring blood oxygen, wear the watch correctly. Avoid wearing the
watch on the wrist joint, keep your arm flat, maintain comfortable (appropriately tight)
fitting between the watch and the wrist skin, and keep your arm still throughout the
measurement process. When affected by external factors (arm sag, arm sway, arm
hair, tattoo, etc.), the measurement result may be inaccurate or the measurement
may fail with no output.
3. We recommend that you tighten the watch strap during workout and loosen it
afterwards.
Basic operations
Common gesture operations
Operation
Corresponding result
Tap the screen
Uses a feature, selects the current item, or proceeds
with the next step
Press and hold the
watch face
Activates watch face selection and watch face settings
Cover the screen
Turns off the screen
Swipe from left to right
On most sub-level pages, returns to the upper-level
page
Produkt Specifikationer
| Mærke: | Amazfit |
| Kategori: | Ikke kategoriseret |
| Model: | Bip 6 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Amazfit Bip 6 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Ikke kategoriseret Amazfit Manualer
1 Juni 2025
16 November 2024
16 November 2024
28 Oktober 2024
27 September 2024
3 September 2024
2 September 2024
25 August 2024
19 August 2024
19 August 2024
Ikke kategoriseret Manualer
- Ikke kategoriseret Cosina
- Ikke kategoriseret Kubo
- Ikke kategoriseret IFM
- Ikke kategoriseret Croozer
- Ikke kategoriseret Moen
- Ikke kategoriseret Toolcraft
- Ikke kategoriseret Prixton
- Ikke kategoriseret Alphacool
- Ikke kategoriseret CAME-TV
- Ikke kategoriseret Eberle
- Ikke kategoriseret Kospel
- Ikke kategoriseret Sheeran Looper
- Ikke kategoriseret Tetra
- Ikke kategoriseret Kask
- Ikke kategoriseret Bullet
Nyeste Ikke kategoriseret Manualer
3 Juni 2025
3 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025
2 Juni 2025