Ambient Weather EZ-30-12 Manual


Læs gratis den danske manual til Ambient Weather EZ-30-12 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Ambient Weather EZ-30-12, eller vil du spørge andre brugere om produktet?

Side 1/7
Page 1
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL 480-346-3380 FAX 480-346-3381
www.AmbientWeather.com
EZ-30-12 Weather Station Stable Gable Mounting Kit with Mast
The EZ-30-12 mounting pole kit provides a
stable weather station mounting solution, ideal
for mounting to a vertical wall, chimney, eve, or
fence post.
Ambient Weather pole mounting kit constructed
of rust proof 10-steel tubing, galvanized using
the Flo-Coat (zinc-chromate polymer) for
excellent corrosion proof protection.
Mounting hardware includes two horizontal
mounting brackets and a support brace.
Pole is made of three assemblable 14" x 1.25"-
diameter masts. Add a mast extension (see
below) to extend the pole an additional 35".
Array pictured is not included.
Figure 1
Components
The EZ-30-12 Stable Gable Mounting Kit includes the following components:
1. Qty 4: 12” Mounting Assemblies
(these will be assembled into two
brackets in Step 1)
2. Qty 1: Support Brace
3. Qty 5: Lag Screws
4. Qty 9: 7/16” Nuts
5. Qty 9: Bolts
6. Qty 9: Lock Washers
7. Qty 3: Assemblable 14” x 1.25”
Masts
Tools and Materials Needed
7/16” deep socket or wrench
Level or Plumb
Electric drill with flat head screw tip
Page 2
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL 480-346-3380 FAX 480-346-3381
www.AmbientWeather.com
Important Installation Instructions
CAUTION: Any metal object may attract a
lightning strike, including your weather station
and tripod.
Never install your weather station in a
thunderstorm.
We recommend properly grounding the
mounting pole kit to avoid extensive damage to
the weather station and structure. Consult a
licensed electrician or local lightning detection
expert prior to installing a ground wire.
.
Installation
1. Assemble the top mounting
bracket as shown in the diagram.
Insert the screw bolt, lock washer
and nut in each of the two
bracket holes. Finger tighten.
2. Assemble the bottom
mounting bracket as shown in the
diagram. Insert the screw bolt,
lock washer, and nut in each of
the two bracket holes. Finger
tighten.
Insert the support brace as shown
in the diagram. Insert the screw
bolt, lock washer and nut in the
two bracket holes. Finger tighten.


Produkt Specifikationer

Mærke: Ambient Weather
Kategori: Ikke kategoriseret
Model: EZ-30-12

Har du brug for hjælp?

Hvis du har brug for hjælp til Ambient Weather EZ-30-12 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Ambient Weather Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Foster

Foster G3 EP820HU Manual

19 September 2025
Foster

Foster G3 EP700LW Manual

19 September 2025
Foster

Foster G3 EP1440G Manual

19 September 2025
Foster

Foster FADPR2 Manual

19 September 2025
Vestil

Vestil LAD-FM-60 Manual

19 September 2025
Foster

Foster G3 EP1/2H Manual

19 September 2025
Foster

Foster G3 EP700L Manual

19 September 2025
Foster

Foster G3 EP700H Manual

19 September 2025
OK

OK DS5 Manual

19 September 2025