Ambient Weather FT012TH Manual


Læs gratis den danske manual til Ambient Weather FT012TH (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Ambient Weather FT012TH, eller vil du spørge andre brugere om produktet?

Side 1/7
Page 1
F012TH Wireless Indoor Thermo-Hygrometer User Manual
1. Introduction
Thank you for your purchase of the F012TH Wireless Indoor Thermo-Hygrometer. The following user
guide provides step by step instructions for installation, operation and troubleshooting.
2. Getting Started
Note: The power up sequence must be performed in the order shown in this section (insert batteries
in the remote transmitter(s) first, Display Console second).
Indoor Thermo-Hygrometer Sensor Set Up
1. Remove the battery door on the back of the display, as shown in Figure 1. Insert two AAA
(alkaline or lithium, avoid rechargeable) batteries in the back of the indoor sensor.
Figure 1
After inserting the batteries, All of the LCD segments will light up for a few seconds to verify all seg-
ments are operating properly. and then icon flash once per 60 seconds thereafter. Each time it flashes,
the sensor is transmitting data.
2. Verify the correct channel number (CH) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 2.


Produkt Specifikationer

Mærke: Ambient Weather
Kategori: Ikke kategoriseret
Model: FT012TH

Har du brug for hjælp?

Hvis du har brug for hjælp til Ambient Weather FT012TH stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Ambient Weather Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer