Ambient Weather MOBILEMOUNT Manual

Ambient Weather Ikke kategoriseret MOBILEMOUNT

Læs gratis den danske manual til Ambient Weather MOBILEMOUNT (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Ambient Weather MOBILEMOUNT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

MobileMount Vehicle Weather Station Mount Instruction Guide Page 1

Ambient Weather MOBILEMOUNT

Instruction Guide

SKU: MOBILEMOUNT (weather station not included).

The MobileMount vehicle weather station mounting system is

an easy to install, portable mounting solution ideal for storm

chasers, hazmat, first responders and racing enthusiasts.

Whether operating in severe weather or responding to hazmat

incidents, you can receive on-scene weather data immediately

and simultaneously with Ambient Weather's Vehicle-Mount

Weather Station.

Designed for storm chaser vehicles, mobile home vehicles,

incident command and mobile communications vehicles, the

14" x 18" base plate provides a thermal barrier (shields heat

transfer from the vehicle's rooftop) and includes four powerful

mounting magnets (requires a metal roof), to rapidly deploy or

detach the weather station mount. Tie downs provide

additional security.

This instruction manual will take you step-by-step through the

process of assembling and mounting Ambient Weather

MobileMount.

Warning: Do not operate the MobileMount with the

vehicle in motion.

Do not install the weather station while the vehicle is in

motion.

Four point tie down (tie downs included) prevent movement of

the MOBILEMOUNT.

Failure to do so may result in

damage,

injury or death.

Components

The MobileMount (Figure 1) component list is shown in

Table 1.

MobileMount Vehicle Weather Station Mount Instruction Guide Page 2

Quantity Description

MobileMount Assembly

Bungee Cable Ropes with hooks and

clasps

Table 1

Figure 1

Dimensions

18 x 14 x 16” (L x W x H)

Tools and Materials Needed

½” wrench

Safety Goggles

Assembly Steps

Connect the Weather Station

1. Connect the U-Bolt assembly (sold with the weather

station) to the weather station, as shown on Figure

2. Do not tighten.

2. Position the Lock Bolt (Figure 1) in the 3 o’clock

position.

Figure 2

3. Connect the weather station to the MobileMount

mast as shown in Figure 3. Position the U-Bolt

below the Lock Bolt at a 45 degree angle and slide

over the top of the mast assembly.

Produkt Specifikationer

Mærke:	Ambient Weather
Kategori:	Ikke kategoriseret
Model:	MOBILEMOUNT

Har du brug for hjælp?

Hvis du har brug for hjælp til Ambient Weather MOBILEMOUNT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Ambient Weather Manualer

Ambient Weather WS-152T Manual

19 September 2025

Ambient Weather WH31SM Manual

19 September 2025

Ambient Weather WS-3000-X3 Manual

19 September 2025

Ambient Weather MOBILEMOUNT Manual

19 September 2025

Ambient Weather WS-5000-RAINSPIKE Manual

19 September 2025

Ambient Weather WS-1080 Manual

19 September 2025

Ambient Weather WS-07 Manual

19 September 2025

Ambient Weather WS-0900-IP Manual

19 September 2025

Ambient Weather WS-40 Manual

19 September 2025

Ambient Weather WS-1000-WIFI Manual

19 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Foster G3 EP1440M Manual

19 September 2025

Foster G3 EP1440LG Manual

19 September 2025

Foster G3 EP700L2MD Manual

19 September 2025

Foster G3 EP700SL Manual

19 September 2025

Foster G3 EP1440H Manual

19 September 2025

Foster G3 EP700G Manual

19 September 2025

Foster G3 EP2/2H Manual

19 September 2025

Foster G3 EP700HL Manual

19 September 2025

Foster PC189/9 Manual

19 September 2025

Foster G3 EP700LL Manual

19 September 2025