Ambient Weather RG100-B Manual


Læs gratis den danske manual til Ambient Weather RG100-B (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Ambient Weather RG100-B, eller vil du spørge andre brugere om produktet?

Side 1/4
Rain Gauge Mounting Shelf Manual Product RG100-A and RG100-B Page 1
WMR-968 / WMR-112A Weather Station Rain Gauge Shelf Manual
This instruction manual will take you step-by-step through the process of assembling and mounting your Universal Rain Gauge Mounting Shelf.
Components
The Universal Rain Gauge Shelf includes the following components:
Mounting Shelf
Mounting Shelf U-
bolt, plate and nuts
Solar Transmitter
Mounting Hardware (two
units)
Thermo-
Hygrometer
Mounting Hardware
Rain Gauge
Mounting
Hardware
Radiation
Shield Mounting
Hardware
9 1/16" x 8 5/8" x 4 5/16"
Fence Post Mounting Screws
4 x 1-5/8” Deck Screws for
mounting to vertical surface
2x 1” U-Bolt
3 x U-Bolt washer
4 x 5/16” Hex Nuts
8 x 1” Pan Screws
8 x 1/4” Flat Washers
8 x 7/16” Hex Nuts
2 x 1/2” Pan Screws
2 x #6 Flat Washers
2 x 5/16” Locking Hex
Nuts
4 x 3/8” Pan
Screws
4 x #4 Flat
Washers
4 x 1/4” Locking
Hex Nuts
3 x 1/2” Pan
Screws
3 x #8 Flat
Washers
3 x 11/32”
Locking Hex
Nuts
Rain Gauge Mounting Shelf Manual Product RG100-A and RG100-B Page 2
Tools and Materials Needed
In addition to the materials above, you may need some of the following tools
and materials:
Small Phillips-Head Screwdriver and Medium Phillips-Head
Screwdriver
Adjustable Wrench or 5/16” Wrench, 7/16” Wrench, 1/4Wrench
and 11/32” Wrench
Drill with 3/16” Drill Bit
To drill pilot holes if attaching rain gauge shelf to the top of a post
Location Tips
The Rain Gauge Mounting Shelf must be placed in an open area
unobstructed by structures or trees.
Do not install over or near sprinklers. Continuous moisture may
damage the rain gauge
Make sure the rain gauge is mounted level
Installation Options
There are two different mounting configurations for the rain gauge shelf:
Pole or metal pipe with outside diameter between 1” and 1 ½”
On the side of a wooden post
Mounting to Wooden or Fence Post
Reference the figure above. Locate the four fence post mounting holes (1).
Using four x 1-5/8” lag screws, attach the back plate of the mounting bracket
to the mounting surface of the wooden post. Make sure that rain gauge is
level prior to attaching the lag screws.
Mounting to Metal Pipe or Pole
(cutaway)
Reference the figure above. Locate the four U-Bolt mounting holes (1), (2),
(3) and (4) on the back panel of the rain gauge mounting shelf. Attach the U-
Bolts, U-Bolt Washers and 5/16” Hex Nuts as shown in the diagram. Finger
tighten the assembly around the mounting pole. With a level, make sure the
rain gauge shelf is level, and tighten the hex nuts with a wrench.
Mounting the Solar Transmitters
SIDE
2 2
2 2
Reference the figure above. Locate the four solar transmitter mounting
holes (2) on the side panel of the rain gauge mounting shelf. Attach the four
1” pan screws, washers and 7/16” hex nuts and tighten the hex nuts with a
wrench.
Repeat procedure above on the other side panel for the second solar
transmitter.


Produkt Specifikationer

Mærke: Ambient Weather
Kategori: Ikke kategoriseret
Model: RG100-B

Har du brug for hjælp?

Hvis du har brug for hjælp til Ambient Weather RG100-B stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Ambient Weather Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Lanaform

Lanaform Stim Fit Manual

18 September 2025
Lanaform

Lanaform Back & Abs Manual

18 September 2025
Emerson

Emerson ER-BT200 Manual

18 September 2025
TRENDnet

TRENDnet TI-CA3K Manual

18 September 2025
Emerson

Emerson PD1950 Manual

18 September 2025
MultiDyne

MultiDyne SilverBack V Manual

18 September 2025
Emerson

Emerson FR24SL Manual

18 September 2025
NGS

NGS Lapnest Manual

18 September 2025
Gamdias

Gamdias Poseidon E2 Manual

18 September 2025