Ambient Weather WS-40 Manual


Læs gratis den danske manual til Ambient Weather WS-40 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Ambient Weather WS-40, eller vil du spørge andre brugere om produktet?

Side 1/8
Version 1.3 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 1
Ambient Weather WS-40 Wireless Indoor / Outdoor
Thermometer
Table of Contents
1. Introduction ..................................................................................................................................... 1
2. Getting Started ................................................................................................................................ 1
2.1 Parts List ....................................................................................................................................... 1
2.2 Thermometer Sensor Set Up ......................................................................................................... 1
2.3 Display Console Set Up ................................................................................................................ 3
2.4 Sensor Operation Verification ................................................................................................ 4
3. Remote Sensor Installation ............................................................................................................. 4
4. Glossary of Terms ........................................................................................................................... 5
5. Specifications .................................................................................................................................. 5
5.1 Wireless Specifications ................................................................................................................. 5
5.2 Measurement Specifications ......................................................................................................... 5
5.3 Power Consumption ...................................................................................................................... 5
6. Troubleshooting Guide .................................................................................................................... 6
7. Liability Disclaimer ........................................................................................................................ 6
8. FCC Statement ................................................................................................................................ 7
9. Warranty Information ...................................................................................................................... 7
1. Introduction
Thank you for your purchase of the Ambient Weather WS-40 wireless indoor / outdoor thermometer.
The following user guide provides step by step instructions for installation, operation and
troubleshooting. To download the latest manual and additional troubleshooting tips, please visit:
http://ambientweather.wikispaces.com/ws40
2. Getting Started
The WS-40 wireless indoor / outdoor thermometer consists of a display console (receiver), and a
wireless thermometer (remote transmitter).
2.1 Parts List
QTY
Item
1
Display Console
Frame Dimensions (LxWxH): 3.5 x 2.5 x 0.75 in
LCD Dimensions (LxW): 1.5 x 1.25
1
Thermometer/Transmitter (F007T)
Dimensions (LxHxW): 4.5” x 2.0” x 0.75”
2.2 Thermometer Sensor Set Up
Note: Do not use rechargeable batteries. We recommend fresh alkaline batteries for temperature
Version 1.3 ©Copyright 2015, Ambient LLC. All Rights Reserved. Page 2
ranges between -4 °F and 140 °F and fresh lithium batteries for temperature ranges between -40 °F
and 140 °F.
1. Remove the battery door on the back of the sensor by removing the set screw, as shown in
Figure 1 .
Figure 1
2. BEFORE inserting the batteries, locate the dip switches on the inside cover of the lid of the
transmitter. Make sure all of the dip switches are in the down position (the WS-40 only
supports one wireless transmitter).
Figure 2
3. Temperature Units of Measure: To change the transmitter display units of measure (°F
vs. °C), change Dip Switch 4, as referenced in Table 1.
DIP SWITCH
FUNCTION
1
2
3
4
DOWN
DOWN
DOWN
---
Channel 1 (WS40)
---
---
---
DOWN
°F
---
---
---
UP
°C
Table 1
4. Insert two AAA batteries.
5. After inserting the batteries, the remote sensor LED indicator will light for 4 seconds, and
then flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data.
6. Verify the correct channel number (CH 1) and temperature units of measure (°F vs. °C) are on
the display, as shown in Figure 3.


Produkt Specifikationer

Mærke: Ambient Weather
Kategori: Ikke kategoriseret
Model: WS-40

Har du brug for hjælp?

Hvis du har brug for hjælp til Ambient Weather WS-40 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Ambient Weather Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Foster

Foster G3 EP1440M Manual

19 September 2025
Foster

Foster G3 EP1440LG Manual

19 September 2025
Foster

Foster G3 EP700L2MD Manual

19 September 2025
Foster

Foster G3 EP700SL Manual

19 September 2025
Foster

Foster G3 EP1440H Manual

19 September 2025
Foster

Foster G3 EP700G Manual

19 September 2025
Foster

Foster G3 EP2/2H Manual

19 September 2025
Foster

Foster G3 EP700HL Manual

19 September 2025
Foster

Foster PC189/9 Manual

19 September 2025
Foster

Foster G3 EP700LL Manual

19 September 2025