American Audio Fusion Scan 250 Manual

American Audio Ikke kategoriseret Fusion Scan 250

Læs gratis den danske manual til American Audio Fusion Scan 250 (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om American Audio Fusion Scan 250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User Instructions

Rev. 10/09

American DJ®

Fusion Scan 250™ Introduction

Introduction: Congratulations and thank you for purchasing the Fusion

Scan 250™ by American DJ , one of the finest pieces of its kind on the ®

market today! The Fusion Scan 250™ is a excellent, light weight, intel-

ligent fixture. Due to it’s physical specifications, it’s a great piece for

mobile DJ’s, roller rinks, small clubs, bars, and bowling centers. When

used in multiples of two or more, these units create an effect that rivals

that of units that can cost up to three times the price. The Fusion Scan

250™ was designed to run in a Master/Slave mode but can be used

with any universal DMX-512 controller.

Customer Support: American DJ provides a toll free customer sup-®

port line, to provide set-up and installation help and to answer any

question should you encounter problems during your set up or initial

operation. You may also visit us on the web at www.americandj.com

for any comments or suggestions. Toll free customer service hours are

Monday through Friday 9:00 a.m. to 5:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ customer support.®

Please recycle the shipping carton when ever possible.

Improvements and changes in specications and design to this

manual and unit may be made at any time without prior notice.

HALOGEN LAMP WARNING!

This fixture is fitted with a halogen lamp which is highly susceptible to

damage if improperly handled. Never touch the lamp with your bare

fingers as the oil from your hands will shorten the lamp life. Never

install, mount, or place this fixture in areas prone to heavy vibration.

Also, never move the fixture until the lamp has had ample time to

cool. Remember, lamps are not covered under warranty conditions.

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Please route your power cord out of the way of

foot trafc.

• Do not attempt to remove or break off the ground prong from

the electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the top cover under any conditions. There are no

user serviceable parts inside.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged in any

way.

• Never operate this unit when it’s cover is removed.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• This unit is intended for indoor use only, use of this product out

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power Cord Protection - Power cords should be routed so they are

not likely to be walked on or pinched by items placed upon or

against them, paying particular attention to cords at plugs, conve-

nience receptacles, and the point where they exit from the unit.

• Cleaning - Follow the directions on page 14.

• Heat -The unit should be situated away from heat sources such

as radiators, heat registers, stoves, or other appliances (including

amplifiers) that produce heat.

Fusion Scan 250™ Safety Precautions

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

Fusion Scan 250™ Safety Precautions

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a

marked change in performance.

The Fusion Scan 250™ features a bright 250 watt halogen bulb with

a separate gobo and color wheel and a green laser effect. The color

wheel features seven brilliant colors plus white and the gobo wheel

features 10 gobos plus a large spot. This fixture incorporates the

use of high quality stepper motors for a more accurate mirror move-

ment. Mirror movement allows for a full 90 degree tilt (vertical) and a

45 degree pan (horizontal). An internal built in microphone allows the

fixtures to run in Stand Alone mode so there is no need for an exter-

nal controller. The Fusion Scan 250™ may also be set-up to run in a

Master-Slave mode when used in multiples, up to four units. When

used in the Master-Slave mode, the unit will chase to several internal

programs. The Fusion Scan 250™ can also be controlled via a stan-

dard DMX controller such as the Elation Show Designer,™ or the ®

Elation DMX Operator,™ giving the user independent control over the ®

gobo and color wheel as well as the mirrors pan and tilt movements.

Note: The built in programs in the Fusion Scan 250™ are so good you

may never need a DMX controller.

• ZB-ELC10 24V/250W

• DMX-512 Compatible.

• Stepper motors for smooth movements.

• 7 colors plus white.

• 10 Gobos plus spot.

• Green Laser

• Gobo Shake

• Master/Slave Operation

• Sound Active.

• Optional MINI/C controller, for blackout control.

• Optional Wireless MINI/C controller, for blackout control.

Fusion Scan 250™ Features

Produkt Specifikationer

Mærke:	American Audio
Kategori:	Ikke kategoriseret
Model:	Fusion Scan 250

Har du brug for hjælp?

Hvis du har brug for hjælp til American Audio Fusion Scan 250 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret American Audio Manualer

American Audio Accu LED MH Manual

20 August 2025

American Audio Profile Panel RGB Manual

19 August 2025

American Audio DJ Scan 250 EX Manual

15 August 2025

American Audio Revo 4 Manual

14 August 2025

American Audio DCD-PRO610 Manual

14 August 2025

American Audio Epsilon Manual

14 August 2025

American Audio Gobo Flash 4 Manual

14 August 2025

American Audio DJ Spot LED Manual

14 August 2025

American Audio CDG-350 Manual

14 August 2025

American Audio Warp Tri LED Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ibm System Storage N6220 Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025