American Audio H2O DMX PRO Manual

American Audio Ikke kategoriseret H2O DMX PRO

Læs gratis den danske manual til American Audio H2O DMX PRO (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om American Audio H2O DMX PRO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Introduction:

Thank you for purchasing the H2O DMX PRO by American DJ . The ®

H2O DMX PRO is an improvement of the very popular H2O LED. This

new unit has better optics and brighter LED output ing vibrant produc

colors. The unit has 2 operating modes; manual mode & DMX Con-

trolled. It can be used as a stand alone unit or in a master-slave con-

figuration. This unit is suitable for theaters, studios, retail stores, and

other similar locations.

Unpacking: Every H2O DMX PRO has been thoroughly tested and

has been shipped in perfect operating condition. Carefully check the

shipping carton for damage that may have occurred during shipping. If

the carton appears to be damaged, carefully inspect your units for any

damage and be sure all accessories necessary to operate the system

have arrived intact. In the event damage has been found or parts are

missing, please contact our toll free customer support number for fur-

ther instructions. Please do not return the system to your dealer with-

out rst contacting customer support.

Customer Support:

American DJ

® provides a toll free customer support line, to provide set

up help and to answer any question should you encounter problems

during your set up or initial operation. You may also visit us on the web

at www.americandj.com for any comments or suggestions. Service

Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. Pacic Stan-

dard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

American DJ.

Please recycle the shipping cartoon when ever possible.

H2O DMX PRO Introduction

Rev. 4/14

User Instructions

H2O DMX PRO Warranty Registration

The two 730H2O DMX PRO carries a year ( days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) num-

ber. The R.A. number must be clearly written on the outside of the

return package. A brief description of the problem as well as the R.A.

number must also be written down on a piece of paper and included

in the shi ping container. If the unit is under warranty, you must prop -

vide a copy of your proof of purchase invoice. You may obtain a R.A.

number by contacting customer support at (800) 322-6337.

H2O DMX PRO Features

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

H2O DMX PRO General Instructions

• Includes Built-In Hanging Yoke

• 5 Colors Plus White

• Mixed Coloring

• Manually Control Color, Rotation Speed, & Dimmer. See page 9.

• 34 Degree Lens & 52 Degree Lens

• Power Cord Daisy Chain (See page 14)

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break o the ground

prong from the electrical cord. This prong is used to reduce the risk

of electrical shock and re in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

t he manufacturer. See page 14 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu-

d ing amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel

when:

A. The power-supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

H2O DMX PRO Safety Precautions

H2O DMX PRO Installation

The unit should be mounted using a mounting clamp (not provided),

axing it to the mounting bracket that is provided with the unit.

Always ensure that the unit is rmly xed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you

are attaching the unit is secure and is able to support a weight of 10

times the unit’s weight. Also always use a safety cable that can hold

12 times the weight of the unit when installing the xture.

The equipment must be installed by a professional, and it must be

installed in a place where it is out of the reach of people’s grasp.

Produkt Specifikationer

Mærke:	American Audio
Kategori:	Ikke kategoriseret
Model:	H2O DMX PRO

Har du brug for hjælp?

Hvis du har brug for hjælp til American Audio H2O DMX PRO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret American Audio Manualer

American Audio Accu LED MH Manual

20 August 2025

American Audio Profile Panel RGB Manual

19 August 2025

American Audio DJ Scan 250 EX Manual

15 August 2025

American Audio Revo 4 Manual

14 August 2025

American Audio DCD-PRO610 Manual

14 August 2025

American Audio Epsilon Manual

14 August 2025

American Audio Gobo Flash 4 Manual

14 August 2025

American Audio DJ Spot LED Manual

14 August 2025

American Audio CDG-350 Manual

14 August 2025

American Audio Warp Tri LED Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ibm System Storage N6220 Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

M-Audio iControl Manual

12 September 2025

Steinberg VST Live 2 Manual

12 September 2025

PCE FLEX 16-E Manual

12 September 2025

Tineco iFloor 3 Breeze Manual

12 September 2025

V7 RMWC9UV450-1N Manual

12 September 2025

Parisot Taylor 2319LISU Manual

12 September 2025

Leen Bakker Bergen Manual

12 September 2025

Redragon GA-200 Manual

12 September 2025