American Audio LED Vision Manual


Læs gratis den danske manual til American Audio LED Vision (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om American Audio LED Vision, eller vil du spørge andre brugere om produktet?

Side 1/7
User Instructions
American DJ®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
LED Vision Introduction
© ®American DJ Supply - www.americandj.com - LED Vision Instruction Manual Page 2
7/07
Unpacking: Thank you for purchasing the LED Vision by American
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your xture for any damage and be
the case damage has been found or parts are missing, please contact
return this unit to your dealer without rst contacting customer sup-
port.
Introduction: The LED Vision is part of American DJ’s continuing
Vision is a bright DMX intelligent LED special effects fixture. The LED
Vision can be used in a stand alone mode or connected in a Master/
Slave conguration. The unit can also be controlled via DMX controller.
This fixture has five operating modes: Program mode, Sound Active
mode, Auto mode, and DMX control mode.
Customer Support: American DJ provides a toll free customer sup-®
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacic Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2941
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or re, do
not expose this unit to rain or moisture.
attempt any repairs yourself, doing so will void your manufactures war-
American DJ .®
PLEASE recycle the shipping carton when ever possible.
LED Vision Safety Precautions
© ®American DJ Supply - www.americandj.com - LED Vision Instruction Manual Page 4© ®American DJ Supply - www.americandj.com - LED Vision Instruction Manual Page 3
To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture
Do not spill water or other liquids into or on to your unit.
Be sure that the local power outlet match that of the required volt-
age for your unit.
Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and re in case of an internal short.
Disconnect from main power before making any type of connection.
Do not remove the cover under any conditions. There are no user
serviceable parts inside.
Never operate this unit when it’s cover is removed.
Never plug this unit in to a dimmer pack
Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
Do not attempt to operate this unit, if it becomes damaged.
This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
During long periods of non-use, disconnect the unit’s main power.
Always mount this unit in safe and stable matter.
Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 11 for cleaning details.
Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
LED Vision Warranty Registration
The LED Vision carries a limited warranty. Please 3 year (1095 days)
fill out the enclosed warranty card to validate your purchase and war-
ranty. You may also register your product online at www. americandj.
be freight pre-paid and accompany a return authorization (R.A.) num-
support for a R.A. number.
LED Vision Features
To optimize the performance of this product, please read these
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
LED Vision General Instructions
Mulit-Colors
Five Operating Modes
Two Sound Active Modes
Built in Microphone
DMX-512 protocol
Two DMX Channel Mode (7 or 12 DMX Channels)


Produkt Specifikationer

Mærke: American Audio
Kategori: Ikke kategoriseret
Model: LED Vision

Har du brug for hjælp?

Hvis du har brug for hjælp til American Audio LED Vision stil et spørgsmål nedenfor, og andre brugere vil svare dig