American Audio Warp Tri LED Manual

American Audio Ikke kategoriseret Warp Tri LED

Læs gratis den danske manual til American Audio Warp Tri LED (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 8 anmeldelser. Har du et spørgsmål om American Audio Warp Tri LED, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Warp Tri LED™ Introduction

General instructions:

To optimize the performance of this product, please read these

operating instructions carefully to familiarize yourself with the basic

operations of this unit. These instructions contain important safety

information regarding the use and maintenance of this unit. Please

keep this manual with the unit, for future reference.

Unpacking:

Thank you for purchasing the Warp Tri LED™ by American DJ . Every ®

Warp Tri LED™ has been thoroughly tested and has been shipped in

perfect operating condition. Carefully check the shipping carton for

damage that may have occurred during shipping. If the carton appears

to be damaged, carefully inspect your unit for any damage and be sure

all equipment necessary to operate the system has arrived intact. In

the event damage has been found or parts are missing, please contact

our toll free customer support number for further instructions. Please

do not return the unit to your dealer without rst contacting customer

support.

Customer Support:

American DJ provides a toll free customer support line, to provide set ®

up help and to answer any question should you encounter problems

during your set up or initial operation. You may also visit us on the web

at www.americandj.com for any comments or suggestions. For service

related issue please contact American DJ . Service Hours are Monday ®

through Friday 9:00 a.m. to 5:00 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: support@americandj.com

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact

your nearest American DJ dealer.

PLEASE do not discard the shipping carton in the trash. Please

recycle when ever possible.

User Instructions

American DJ®

6122 S. Eastern Ave.

Los Angeles Ca. 90040

www.americandj.com

11/08

WARP

TRI LED

Warp Tri LED™ Precautions

Safety Issue: This unit may blow the breaker if the maximum allotted

load of 2 amps is reached. If the fuse needs replacement, please see

the fuse replacement guidelines on page 6.

• Be sure the local power outlet match the required voltage of the

unit.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no

user serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper

ventilation. Allow about 6” (15cm) between this device and a wall.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-Cord Protection - Power-supply cords should be routed

so that they are not likely to be walked on or pinched by items

placed upon or against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where they exit from

the fixture. Do not attempt to remove or break off the ground prong

from the electrical cord. This prong is used to reduce the risk of

electrical shock and re in case of an internal short.

• The fixture should be serviced by qualified service personnel when:

A. The power cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the appliance.

C. The appliance has been exposed to rain or water.

D. The fixture does not appear to operate normally or exhibits a

marked change in performance.

Warp Tri LED™ Operation

Introduction: The American DJ Warp Tri®

LED™

is a LED moon-ower

effect with 18 gobo patterns. This fixture is designed for mobile DJ’s,

clubs, bands, roller rinks and any arena that requires a compact, light

weight, easy to use unit.

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ ®

Warp Tri LED™ before attempting operation.

Operation: After plugging the unit if there is no LED output check

the fuse. If the fuse has not popped, please contact customer sup-

port for further instructions. This fixture features a light weight case

design and an adjustable hanging bracket.

This unit comes with two 3-way multi-operating switch located on the

bottom of the unit. The switch on the right controls the mirror dish,

and the switch on the left controls the gobo. The switches have three

(3) different operating modes; Static, Sound Active, and Auto.

Mirror Control (Right Switch):

Switch in the "I" auto position: Mode 1 - In this mode the mirror dish

will spin continuously in one direction, regardless of the presence of

sound.

Switch in the “0” static position: Mode 2 - In this mode the mirror

dish will remain static. In this mode the unit may be used as a rotat-

ing-gobo projector.

Switch in the “II” sound active position: Mode 3 - In the this mode the

mirror dish will react to sound. Please note that tapping on the unit,

or high pitched sounds may not trigger the unit, the unit is designed

to react to low frequencies (bass). Also note that the music sensitivity

is preset at the factory and may not be changed or adjusted.

Gobo Control (Left Switch):

Switch in the "I" auto position: Mode 1 - In this mode the gobo wheel

will spin continuously in one direction, regardless of the presence of

sound.

Switch in the “0” static position: Mode 2 - In this mode the gobo

wheel will remain static.

Warp Tri LED™ Warranty Registration

The Warp Tri LED™ carries a three year (1095 days) limited warranty.

Please fill out the enclosed warranty card to validate your purchase.

All returned service items whether under warranty or not, must be

freight pre-paid and accompany a return authorization (R.A.) number.

If the unit is under warranty you must provide a copy of your proof of

purchase invoice. Please contact American DJ customer support for ®

a R.A. number.

Produkt Specifikationer

Mærke:	American Audio
Kategori:	Ikke kategoriseret
Model:	Warp Tri LED

Har du brug for hjælp?

Hvis du har brug for hjælp til American Audio Warp Tri LED stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret American Audio Manualer

American Audio Accu LED MH Manual

20 August 2025

American Audio Profile Panel RGB Manual

19 August 2025

American Audio DJ Scan 250 EX Manual

15 August 2025

American Audio Revo 4 Manual

14 August 2025

American Audio DCD-PRO610 Manual

14 August 2025

American Audio Epsilon Manual

14 August 2025

American Audio Gobo Flash 4 Manual

14 August 2025

American Audio DJ Spot LED Manual

14 August 2025

American Audio CDG-350 Manual

14 August 2025

American Audio Warp Tri LED Manual

14 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Draper 54243 Manual

1 Oktober 2025

Structural Concepts Fusion GHSV1052RLB Manual

1 Oktober 2025

Vestil ULTT-5448-6-YEL460-3 Manual

1 Oktober 2025

Genius Invictus Manual

1 Oktober 2025

Structural Concepts Reveal NE3635HSSV Manual

1 Oktober 2025

Vestil PEL-100S-D3 Manual

1 Oktober 2025

Structural Concepts Fusion GMDSV4D Manual

1 Oktober 2025

Structural Concepts Fusion GMSSV652R Manual

1 Oktober 2025

Vestil AHA-2-12-8-VG Manual

1 Oktober 2025

Vestil AHA-4-8-12-TLC Manual

1 Oktober 2025