APC ACAC75017 Manual

APC Ikke kategoriseret ACAC75017

Læs gratis den danske manual til APC ACAC75017 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om APC ACAC75017, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Installation Sheet 990-6247-001 -Release Date: 03/2020

ACAC75016 and ACAC75017—Low Temperature Kit

The low temperature kit provided by Schneider Electric includes a pressure relief

valve on the liquid receiver vessel. If the low temperature kit is not installed, then

Schneider Electric recommends the installation of a pressure relief valve on the

discharge pipe near the condenser. The pressure relief valve selection and

installation is the responsibility of the installer and shall comply with local

authorities.

Install Kit Inventory

EMEA-PED Versions (ACAC75017)

na5835a

Item Description Quantity Item Description Quantity

Ball valve, 7/8 in. (inlet) 1 Tie wrap, 1 1/4 in. (not

used)

Ball valve, 5/8 in. (outlet)

(not used)

1 Bolt, M6 (not used) 16

Head pressure valve

and check valve

1 Washer flat, M6 (not

used)

Safety valve (PED) 1 Hose clamp 2

NAM-ASME Versions (ACAC75016)

na5836a

Item Description Quantity Item Description Quantity

Ball valve, 7/8 in. (inlet) 1 Bolt, 1/4 in. (not used) 2

Ball valve, 5/8 in. (outlet)

(not used)

1 Nut, M10 (not used) 4

Head pressure valve

and check valve

1 Bolt, M10 (not used) 4

Schneider Electric

35 rue Joseph Monier

92500 Rueil Malmaison -

France

+ 33 (0) 1 41 29 70 00

www.schneider-electric.com

As standards, specifications, and design

change from time to time, please ask for

confirmation of the information given in this

publication.

Schneider Electric

reserved.

ACAC75016 and ACAC75017—Low Temperature Kit Unpacking

Item Description Quantity Item Description Quantity

Safety valve (ASME) 1 Washer flat, M10 (not

used)

Washer flat, 1/4 in. (not

used)

2 Hose clamp 2

Unpacking

EMEA-PED Versions (ACAC75017)

1. Remove plywood top and sides from the pallet.

na5817a

2. Remove the valve box (contains safety valve, ball valve, head pressure valve,

and check valve).

3. Remove brackets.

na5818a

VALVE BOX

BRACKET

4. Remove receiver kit.

na5819a

M6X50 HEX HEAD SCREW

M6 WASHER

M6 NUT

2 990-6247-001

Produkt Specifikationer

Mærke:	APC
Kategori:	Ikke kategoriseret
Model:	ACAC75017
Bredde:	219 mm
Dybde:	219 mm
Højde:	640 mm
Produktfarve:	Sort
Produkttype:	Flooded receiver
Pakkevægt:	68000 g
Pakkedybde:	585 mm
Pakkebredde:	1175 mm
Pakkehøjde:	650 mm
Antal:	1