APC ACCS1009 Manual

APC Ikke kategoriseret ACCS1009

Læs gratis den danske manual til APC ACCS1009 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 7 anmeldelser. Har du et spørgsmål om APC ACCS1009, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Rack Air Containment System (ACCS1000–
ACCS1007)—Overview
Introduction
The Rack Air Containment System (RACS) is a mechanical ducting system that attaches to the front
or rear of an enclosure to provide increased cooling capacity. The RACS is a modular system that
works with APC® NetShelter® SX enclosures and InRow® cooling units to provide maximum
cooling predictability, capacity, and efficiency. By attaching the RACS to the rear of the NetShelter
SX, air expelled from IT equipment is forced to pass through the cooling unit, where it is
conditioned. This ensures that warm exhaust air does not enter the air inlets of installed servers.
Redundant configurations allow maximum availability. Optional front containment configurations
reduce noise and provide additional control of air flow. The RACS components can be attached to a
single enclosure or a group of enclosures. The RACS consists of eight components that can be
installed separately or together, depending on your configuration.
• ACCS1000—Rear containment for InRow RC or SC cooling units
• ACCS1001—Rear containment for NetShelter SX and InRow RP cooling units
• ACCS1002—End caps for any rear- or front-containment configuration
• ACCS1003—Front containment for InRow RC or SC cooling units
• ACCS1004—Front containment for InRow RP cooling units
• ACCS1005—Front containment for NetShelter SX enclosures
• ACCS1006—Rear containment for NetShelter SX 750-mm enclosures
• ACCS1007—Front containment for NetShelter SX 750-mm enclosures
Features of the RACS
• Rear containment—Ensures server exhaust air is returned to the InRow cooling unit for
maximum cooling predictability. Prevents recirculation of hot exhaust air.
• Front containment—Ensures cold supply air is not captured by neighboring equipment.
• Modular design—Compatible with standard NetShelter SX enclosures, providing maximum
system flexibility and scalability.
• Redundant configurations—Provide N + 1 or uding additional InRow 2N redundancy by incl
cooling units.
• Clear polycarbonate door inserts—Provide required air containment while allowing visibility
to installed IT equipment and a consistent appearance across enclosures.
• Lockable doors—Provide enclosure security.
• Noise reduction—Containment of both the front and rear of the enclosure reduces the level of
noise generated by the installed equipment.
• ACCS1000—Rear containment for InRow 300mm cooling units
• ACCS1001—Rear containment for NetShelter SX and InRow RP cooling units
• ACCS1002—End caps for any rear- or front-containment configuration
• ACCS1003—Front containment for InRow 300mm (100 series) cooling units
• ACCS1004—Front containment for InRow 600mm cooling units
• ACCS1005—Front containment for NetShelter SX enclosures
• ACCS1006—Rear containment for NetShelter SX 750-mm enclosures
• ACCS1007—Front containment for NetShelter SX 750-mm enclosures
• ACCS1009—Front containment for InRow 300mm (300 series) ACRC301S/H
Rack Air Containment System (ACCS1000–
ACCS1009)—Overview
Rack Air Containment System Overview—ACCS1000-ACCS10072
Compatibility
The RACS can be coupled with one or more NetShelter SX enclosures in the following configurations:
• A ducted return and flooded supply configuration
• A ducted return and ducted supply (recommended configuration for uncontrolled environments)
The configurations listed in the following table and shown in the following figure provide hot air
retrieval and provide coupling for either redundancy or capacity.
Number of NetShelter
SX Enclosures
Number of InRow RC or
SC cooling units
Number of InRow RP
cooling units
1 1 or 2 1
2 2, 3, or 4 1 or 2
na2207a
InRow RC or SCInRow RP
SX RackSX Rack
SX Rack
SX Rack SX Rack
SX Rack SX Rack
RCRC
RC
RC
RC
RC
RC
RC RC
SX Rack
RP
SX Rack SX Rack
SX Rack
SX Rack
SX Rack
RP RP
RP RP
SX Rack
RC RC
SX Rack
RC RC
2 + 2
2 + 3
2 + 4
2 + 1
2 + 2

Produkt Specifikationer

Mærke: APC
Kategori: Ikke kategoriseret
Model: ACCS1009

Har du brug for hjælp?

Hvis du har brug for hjælp til APC ACCS1009 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret APC Manualer

APC

APC Back-UPS BX750MI Manual

8 April 2025
APC

APC SYNX-980214 Manual

11 December 2024
APC

APC SYNX-3573406 Manual

11 December 2024
APC

APC SBP3000RMHW Manual

4 December 2024
APC

APC FS-AC-8002-U Manual

15 Oktober 2024
APC

APC EVP1000 Manual

14 Oktober 2024
APC

APC Switched Rack PDU Manual

1 Oktober 2024
APC

APC E3SXR6 Manual

20 September 2024
APC

APC C2C Manual

17 September 2024
APC

APC AP7868 Manual

17 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rival

Rival FRRVSC500 Manual

14 Juni 2025
Marshall

Marshall AR-DM61-BT Manual

14 Juni 2025
Berkel

Berkel Suprema Salumeria PES315 Manual

14 Juni 2025
Levenhuk

Levenhuk LabZZ F1 Manual

14 Juni 2025
AVM

AVM FRITZ!Smart Energy 200 Manual

14 Juni 2025
Aiphone

Aiphone AC-2DM-B Manual

14 Juni 2025
Levenhuk

Levenhuk LabZZ FL5 Manual

14 Juni 2025
Mountfield

Mountfield Multiclip 501HP Manual

14 Juni 2025
Bopita

Bopita Universal Manual

14 Juni 2025
ENTES

ENTES GEMO-10-4G Manual

14 Juni 2025