APC AP9520TH Manual

APC Ikke kategoriseret AP9520TH

Læs gratis den danske manual til APC AP9520TH (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 14 anmeldelser. Har du et spørgsmål om APC AP9520TH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Temperature and Humidity Sensor

Installation Sheet

Inventory

Install the sensor

1. Find a suitable location to mount the sensor, such as an area that contains mixed, moving air.

Note: Avoid installing the sensor near an area that could cause an inaccurate

reading, such as near air ducts, windows, exterior walls, or room entrances.

2. Mount the sensor using screws or hook-and-loop

fasteners:

– Using screws:

Mark and drill two holes, 3/32 in (2.38 mm) in

diameter and 1.53 in (38.8 mm) apart.

Temperature and Humidity

Sensor with Display or

Temperature Sensor with Display

(1)

#6 × 3/4-in Phillips

self-tapping screws

(4)

Hook-and-loop

fasteners

(2)

Terminator

(1)

Warning: Before drilling, check

for unexposed wiring behind

the drilling surface.

Temperature and Humidity Sensor Installation2

– Using hook-and-loop fasteners:

Clean the mounting surface so that it is free of

dust, oils, and moisture. Install the sensor using

both hoop-and-loop fasteners. Hold them in place

for five seconds to ensure a firm adhesion.

3. Route a cable from the sensor to the

device that will monitor the sensor.

When using more than one sensor:

Route a cable from one sensor to

the next. Each connection on the

sensor should have either a CAT 5

cable or a terminator (0W04161)

(provided).

Set the A-Link address

Set the DIP switches on each sensor to a unique A-Link address.

See the documentation provided with the monitoring device for A-Link addresses. Each

sensor must be set with a unique A-Link address. Some addresses are reserved for use by the

monitoring device. The addresses for sensors will vary depending on the monitoring device to

which they are connected.

Screen menus

At three-second intervals, the display scrolls through two screens (for AP9520T) or three screens (for

AP9520TH).

1 2 3 4

Produkt Specifikationer

Mærke:	APC
Kategori:	Ikke kategoriseret
Model:	AP9520TH
Vægt:	800 g
Opbevaringstemperatur (T-T):	-40 - 65 °C
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Driftstemperatur (T-T):	0 - 45 °C
Dimensioner (BxDxH):	43 x 28 x 99 mm
Harmoniseret systemkode (HS):	84733020
Driftshøjde:	0 - 3000 m
Kompatible produkter:	AS/NZS 3548 (C-Tick) Class A, CE, EN 55022 Class A, EN 55024, FCC Part 15 Class A, ICES-003, VCCI