APC AP98275 Manual

APC Kabler til computere og periferiudstyr AP98275

Læs gratis den danske manual til APC AP98275 (4 sider) i kategorien Kabler til computere og periferiudstyr. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7 anmeldelser. Har du et spørgsmål om APC AP98275, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AP98275: UPS Signalling Bundle for

IBM AS/400 & IBMi (IBM Power Systems)

Overview

What is the AP98275 Signalling Bundle?

This bundle enables IBM servers (AS/400 & IBMi systems) to communicate with Smart-UPS and

Symmetra UPS devices from APC by Schneider Electric.

It consists of:

• communication cables: 940-0031 (9-pin male cable), 940-0006 (15-pin male cable),

940-0274 (9-pin male to female cable),

• and a dongle connector, 940-3000 (RJ45 to 9-pin female dongle).

Use one of the supplied cables (with, in some instances, the dongle) to directly connect your IBM AS/400

or IBMi system with your UPS device. This facilitates unattended shutdowns and avoids potential system

corruption.

In previous APC by Schneider Electric bundles, the cables above came separately. This new

bundle combines the cables with the new dongle to offer a single solution to all the connectivity

issues. See "Which cable should you use?".

Why use the AP98275 Signalling Bundle?

The installation of a stand-alone UPS without using this bundle provides protection against brief power

outages, brownouts, and other power line transients.

However, to protect your system from corruption that is caused by extended power outages, you must use

this bundle. Then, your IBM system's built-in UPS Monitoring function can check the UPS status, alert

you about power problems, and automatically shut down the system.

System Requirements for AP98275

One of these IBM systems, (see also "Which cable should you use?"):

• An IBM AS/400 Model 9402, 9404, or 9406

• IBMi system, power series 5, 6, 7

Any of the APC by Schneider Electric UPS range of UPS device types below.

The Smart-UPS devices are listed by prefix, e.g. SURT.

SU SUA

SURT SURTD SURTA

SUM SMX

SMT Symmetra LX Symmetra RM

AP98275: UPS Signaling Bundle2

Installing the AP98275

Which cable should you use?

Each combination of an IBM system and a UPS device needs a cable (and in some cases a dongle) from the

AP98275 bundle. The table below lists the supported combinations in rows:

1 f/c is an IBM term meaning feature code, e.g., the f/c 1827 is the IBM feature code 1827 service processor

communications port to UPS cable

An IBM link that provides information on expansion drawer and scenarios on where to use the item:

http://pic.dhe.ibm.com/infocenter/powersys/v3r1m5/index.jsp?topic=/areab/areabfc5802.htm.

IBM Server Model

UPS Device

and Appropriate Cable in AP98275

SURTD, SMT, SMX SU, SUA, SURT, SURTA, SUM,

Symmetra LX, Symmetra RM

IBM AS/400

older 9402, 9404 models

940-0006

and 940-3000 (dongle)

940-0006

newer 9402, all 9406 models 940-0031

and 940-3000 (dongle)

940-0031

IBMi:

power series 5, 6

940-0274

and 940-3000 (dongle)

940-0274

power series 7 with RJ45 port 940-0274 with f/c1 3930

and 940-3000 (dongle)

940-0274 with f/c1 3930

power series 7 with DB9M

port

940-0274

and 940-3000 (dongle)

940-0274 (no f/c required)

power series with no on-box

UPS communication support

940-0031(with f/c1 1827,

f/c 3930 depending on the server),

and 940-3000 (dongle),

as well as an IBM expansion drawer

such as 5877 or 5802

940-0031 (with f/c1 1827,

f/c 3930 depending on the server),

as well as an IBM expansion drawer

such as 5877 or 5802

Produkt Specifikationer

Mærke:	APC
Kategori:	Kabler til computere og periferiudstyr
Model:	AP98275
Produktfarve:	Hvid
Harmoniseret systemkode (HS):	84733080
Kompatible produkter:	IBM AS/400
Stik 1:	DB9
Stik 2:	DB9
Stik 1 køn:	Hanstik
Stik 2 køn:	Hanstik