APC Back-UPS Pro BN1350M2 Manual

APC Uafbrydelig strømforsyning (UPS) Back-UPS Pro BN1350M2

Læs gratis den danske manual til APC Back-UPS Pro BN1350M2 (12 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 79 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 40 anmeldelser. Har du et spørgsmål om APC Back-UPS Pro BN1350M2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Safety and General Information

Inspect the package contents upon receipt. Notify the carrier and

dealer if there is any damage.

SAVE THESE INSTRUCTIONS - This section contains important

instructions that should be followed during installation and maintenance

of the UPS and batteries.

Inventory

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH

•This UPS is intended for indoor use only.

•Do not operate this UPS in direct sunlight, in contact with fluids, or where there is excessive

dust or humidity.

•Be sure the air vents on the UPS are not blocked. Allow adequate space for proper ventilation.

Failure to follow these instructions will result in death or serious injury.

CAUTION

RISK OF HYDROGEN SULPHIDE GAS AND EXCESSIVE SMOKE

•Connect the UPS power cable directly to a wall outlet.

•Battery must be replaced when they reach end of service life.

•Batteries must be replaced when the unit indicates battery replacement is necessary.

•When replacing batteries, replace with the same number and type of batteries originally

installed in the unit.

Failure to follow these instructions could result in minor or moderate injury and

equipment damage.

bu476a

Coaxial cable

USB communication cable

User Manual Back-UPS™ Pro

BN 1100/1350/1375/1400/1500 M2

BN 1100/1350/1500 M2-CA

Back-UPS Pro BN 1100/1350/1375/1400/1500 M2 / M2-CA2

Connect the Battery

The UPS is shipped with the battery disconnected.

Install PowerChute™ Personal Edition Software

Use PowerChute Personal Edition software to configure the UPS settings. During a

power outage, PowerChute will save any open files on your computer and shut it down.

When power is restored, it will restart the computer.

Note: PowerChute is only compatible with a Windows operating system. If you are

using Mac OSX, use the native shutdown feature to protect your system. See the

documentation provided with your computer.

Installation

Use the USB communication cable supplied with the Back-UPS to connect the data port

on the Back-UPS to the USB port on your computer. On the computer, go to

www.apc.com Search for “PowerChute Personal Edition” then click on “View Details”

to download the latest version of PCPE software. Click the download link and select

Software product. Select the appropriate operating system. Follow directions to

download the software.

 Lay the UPS with the battery door facing

up. The arrows point to the locking tabs of the

battery compartment.

 Press the tabs downwards and pull the

battery door away from the unit to access

the battery modules.

 Using the handles on both sides of the

battery, lift the battery 30 degrees upward to

expose the battery connector. Connect the red

wire as shown above.

 Push the battery into the unit.

 Replace the battery door.

u471a

bu472

bu473a

bu474a

bu475

Produkt Specifikationer

Mærke:	APC
Kategori:	Uafbrydelig strømforsyning (UPS)
Model:	Back-UPS Pro BN1350M2
Bredde:	100 mm
Dybde:	368 mm
Højde:	260 mm
Vægt:	10400 g
Brugervejledning:	Ja
Produktfarve:	Sort
Skærmtype:	LCD
Pakkevægt:	13000 g
Pakkedybde:	500 mm
Pakkebredde:	241 mm
Pakkehøjde:	380 mm
USB-port:	Ja
Responstid:	8 ms
Opbevaringstemperatur (T-T):	-15 - 40 °C
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Driftstemperatur (T-T):	0 - 40 °C
Kabler inkluderet:	Coaxial, USB cable
Støjniveau:	45 dB
Udgangseffekt:	810 W
Certificering:	ENERGY STAR V2.0 (USA), FCC part 15 class B, NOM, TUV C-US
Batterilevetid (maks.):	5 År
Opladningstid for batteri:	16 t
Bæredygtighedscertifikater:	RoHS, ENERGY STAR
Driftshøjde:	0 - 3048 m
Ikke-drift højde:	0 - 3048 m
Indgangsfrekvens:	60 Hz
Lydalarmer:	Ja
Overspænding energivurdering:	1080 J
Indgående driftsspænding (maks.):	139 V
Output strømkapacitet (VA):	1.35 kVA
Indgående driftsspænding (min.):	88 V
Udgangs driftsspænding (min.):	- V
Udgangs driftsspænding (maks.):	- V
UPS topologi:	Interaktivt indgangsstik
Hørbare alarmtilstande:	Alarm when on battery, Low battery alarm, Overload alarm
Hot-swap batteri:	Ja
Automatisk spændingsregulering (AVR):	Ja
Uddgående frekvens:	60 Hz