APC Back-UPS Pro BR1000G Manual

APC Uafbrydelig strømforsyning (UPS) Back-UPS Pro BR1000G

Læs gratis den danske manual til APC Back-UPS Pro BR1000G (8 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om APC Back-UPS Pro BR1000G, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Installation and Operation
Back-UPS™ Pro BR1000G
Connect the Battery
Install PowerChute™ Personal Edition Software
PowerChute Personal Edition software provides automatic file saving and shutdown of your computer
in the event of a power failure. Use the cable supplied with the Back-UPS to connect the data port on
the Back-UPS to the USB port on your computer. Place the CD into your computer, and follow the on-
screen instructions.
Inventory Safety and General Information
Inspect the package contents upon receipt. Notify
the carrier and dealer if there is any damage.
Read the Safety Guide supplied with this unit before
installing the UPS.
• This UPS is intended for indoor use only.
• Do not operate this UPS in direct sunlight, in contact with fluids, or where there
is excessive dust or humidity.
• Be sure the air vents on the UPS are not blocked. Allow adequate space for
proper ventilation.
• The battery typically lasts for three to five years. Environmental factors impact
battery life. Elevated ambient temperatures, poor quality AC power, and
frequent short duration discharges will shorten battery life
• Connect the UPS power cable directly to a wall outlet. Do not use surge
protectors or extension cords.
 
 
bu001b
bu055a
bu057a
bu059a
bu058a
bu060a
Back-UPS Pro BR1000G2
Connect the Equipment
Battery Backup and Surge Protected outlets
When the Back-UPS is receiving input power, the Battery
Backup with Surge Protection outlets will supply power to
connected equipment. During a power outage or other AC
problems, the Battery Backup outlets receive power for a
limited time from the Back-UPS.
Connect equipment such as printers, fax machines,
scanners, or other peripherals that do not need battery
backup power to the Surge Protection Only outlets. These
outlets provide full-time protection from surges even if the
Back-UPS is switched OFF.
Master and Controlled outlets
To conserve electricity, when the device connected to
Master Outlet goes into Sleep or Standby mode, or turns
Off, the Controlled device(s) will shut down as well,
saving electricity.
Connect a master device, such as a desktop computer or
audio/visual receiver to the Master outlet. Connect
peripheral devices such as a printer, speakers, or a scanner
to the Controlled outlets.
USB and Serial Data port To use PowerChute Personal Edition, connect the supplied USB software cable or an optional
serial cable (not supplied).
Ground screw Connect the ground lead of additional surge suppression devices such as network and data line
surge protectors.
Building Wiring Fault indicator If this indicator is illuminated, there is a problem with the wiring in the building. Contact an
electrician immediately and do not use the Back-UPS.
Surge Protected outlets,
controlled by the Master outlet
These outlets are protected from electrical surges, and will disconnect from AC power during a
power outage, or if the Master device goes into Sleep or Standby mode.
Surge Protected outlets These outlets provide full-time protection from surges, even if the Back-UPS is off. Connect
equipment such as printers and scanners that do not require battery backup protection.
Battery Backup outlets with
Surge Protection
During a power outage or other AC problems, the Battery Backup outlets receive power for a
limited time from the Back-UPS. Connect critical equipment such as desktop computer,
computer monitor, modem or other data sensitive devices into these outlets.
Battery Backup outlets with
Surge Protection, controlled by
the Master outlet
These outlets will supply battery power to the connected equipment during a power outage.
Power will be disconnected to these outlets if the Master device goes into Sleep or Standby
mode. Connect equipment such as a computer monitor to these outlets.
Master outlet Connect the master device to this outlet, in most scenarios, this will be the main computer.
In/Out Ethernet
surge-protected ports
Use an Ethernet cable to connect a cable modem to the IN port, and connect a computer to the
OUT port.
Coaxial ports with surge
protection
Connect a cable modem or other equipment with coaxial jacks.
bu126a

Produkt Specifikationer

Mærke: APC
Kategori: Uafbrydelig strømforsyning (UPS)
Model: Back-UPS Pro BR1000G

Har du brug for hjælp?

Hvis du har brug for hjælp til APC Back-UPS Pro BR1000G stil et spørgsmål nedenfor, og andre brugere vil svare dig


Uafbrydelig strømforsyning (UPS) APC Manualer

APC

APC Back-UPS Pro BN1350M2 Manual

10 April 2025
APC

APC RBC172 Manual

28 Marts 2025
APC

APC Back-UPS XS 1500 Manual

28 Marts 2025
APC

APC Smart-UPS SCL500RMI1UNC Manual

28 Marts 2025
APC

APC Back-UPS Pro BR1000G Manual

27 Marts 2025
APC

APC Isolation Transformer Manual

22 Januar 2025
APC

APC Symmetra RM3 Manual

22 Januar 2025
APC

APC Smart-UPS SMT750C Manual

12 Oktober 2024
APC

APC Back-UPS BN4001 Manual

12 Oktober 2024
APC

APC Back-UPS BX950U-AZ Manual

12 Oktober 2024

Uafbrydelig strømforsyning (UPS) Manualer

Nyeste Uafbrydelig strømforsyning (UPS) Manualer

Middle Atlantic

Middle Atlantic UPS-IPCARD Manual

15 Juni 2025
PowerWalker

PowerWalker VI 1000 GXB Manual

9 Juni 2025
Green Cell

Green Cell UPS09 Manual

8 Juni 2025
PowerWalker

PowerWalker Basic VI 600 STL Manual

7 Juni 2025
Middle Atlantic

Middle Atlantic UPS-OLEBPR-2 Manual

4 Marts 2025
Ditek

Ditek DTK-UPS2000RE Manual

30 Januar 2025
Ditek

Ditek DTK-UPS1000R Manual

30 Januar 2025
Ditek

Ditek DTK-UPS3000RE Manual

30 Januar 2025
Xtreme

Xtreme P80-1500 Manual

28 Januar 2025
Xtreme

Xtreme S71-1500 Manual

28 Januar 2025