APC Easy Rack Cable Manager Manual

APC Ikke kategoriseret Easy Rack Cable Manager

Læs gratis den danske manual til APC Easy Rack Cable Manager (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om APC Easy Rack Cable Manager, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Installation 990–6478 Release date: 02/2021

Easy Rack 1U Cable Manager in Depth ER7DCM

Kit Instructions

ER7DCM Inventory

Easy Rack 1U Cable Manager in Depth (1)

M5 x 10 Phillips head screw (4)

Installation:

The 1U Cable Manager is installed to the front and rear vertical mounting rails on

either side of your Easy Rack. The 1U Cable Manager can be adjusted to fit the

depth of your Easy Rack. From the center of the mounting holes, the Cable

manager can be extended from the minimum depth of 383mm (15.08 in.) to the

maximum of 573mm (22.56 in.).

383mm (15.08 in.)

573mm (22.56 in.)

Use the four (4) M5 x 10 Phillips head screws provided to install the 1U Cable

Manager to the round holes on the inside edge of the front and rear vertical

mounting rails.

APC by Schneider Electric

70 Mechanic Street

02035 Foxboro, MA

USA

www.apc.com

As standards, specifications, and design

change from time to time, please ask for

confirmation of the information given in this

publication.

reserved.

Produkt Specifikationer

Mærke:	APC
Kategori:	Ikke kategoriseret
Model:	Easy Rack Cable Manager
Type:	Kabelbakkepanel
Vægt:	500 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Pakkevægt:	500 g
Pakkedybde:	530 mm
Pakkebredde:	60 mm
Pakkehøjde:	50 mm
Harmoniseret systemkode (HS):	85389099
Rackkapacitet:	1U