APC NetShelter CX AR4703 Manual

APC Ikke kategoriseret NetShelter CX AR4703

Læs gratis den danske manual til APC NetShelter CX AR4703 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om APC NetShelter CX AR4703, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
NetShelter CX Fan Booster Kit AR4703
Installation Instructions
Safety
Inventory
Tools required (not provided)
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe electrical work
practices. See NFPA 70E or CSA Z462.
• This equipment must only be installed and serviced by qualified electrical personnel.
• Turn off all power supplying this equipment before working on the equipment.
• Perform appropriate lockout/tagout procedures.
Failure to follow these instructions will result in death or serious injury.
WARNING
HEAVY EQUIPMENT HAZARD
Fan modules are heavy. Two people are recommended when removing modules from the
enclosures.
Failure to follow these instructions can result in serious injury or equipment damage.
NOTICE
Always use the supplied 24V power supply with the Fan Booster Kit fan tray only. DO NOT
use the 24V supplied power supply with the original installed NetShelter CX fan tray.
ns1569b
Fan Tray (1) Power Supply (1) Cable Tie(1)
Wire Cutting Phillips Head Screwdriver
NetShelter CX Fan Kit Installation2
Remove the power supply
Open the left hand side door to access the power supply.
Note: Check that the power is off. The fan blades are not turning and the LED on the power
supply is not lit.
Disconnect the power cord from the
top of the power supply.
Cut and remove the cable tie
securing the power supply to the
bracket.
Lift the power supply out of its
bracket.
Pull the fan module end of the
power supply lead from the access
hole.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
• Apply appropriate personal protective equipment (PPE) and follow safe electrical work
practices. See NFPA 70E or CSA Z462.
• This equipment must only be installed and serviced by qualified electrical personnel.
• Turn off all power supplying this equipment before working on the equipment.
• Perform appropriate lockout/tagout procedures.
Failure to follow these instructions will result in death or serious injury.
ns2142a
ns2143a

Produkt Specifikationer

Mærke: APC
Kategori: Ikke kategoriseret
Model: NetShelter CX AR4703

Har du brug for hjælp?

Hvis du har brug for hjælp til APC NetShelter CX AR4703 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret APC Manualer

APC

APC Back-UPS BX750MI Manual

8 April 2025
APC

APC SYNX-980214 Manual

11 December 2024
APC

APC SYNX-3573406 Manual

11 December 2024
APC

APC SBP3000RMHW Manual

4 December 2024
APC

APC FS-AC-8002-U Manual

15 Oktober 2024
APC

APC EVP1000 Manual

14 Oktober 2024
APC

APC Switched Rack PDU Manual

1 Oktober 2024
APC

APC E3SXR6 Manual

20 September 2024
APC

APC C2C Manual

17 September 2024
APC

APC AP7868 Manual

17 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rival

Rival CN753-W Manual

15 Juni 2025
Acopa

Acopa 553WSMKE Manual

15 Juni 2025
Atosa

Atosa RDCS-35 Manual

15 Juni 2025
Gourmia

Gourmia GAF692 Manual

15 Juni 2025
Taylor

Taylor 5315856 Manual

15 Juni 2025
Watts

Watts LF8B Manual

15 Juni 2025
Watts

Watts PLT-5 Manual

15 Juni 2025
ToiToiKids

ToiToiKids Fay Manual

15 Juni 2025
Astell&Kern

Astell&Kern PD10 Manual

15 Juni 2025
Aiphone

Aiphone JP-8Z Manual

15 Juni 2025