APC SurgeArrest Home/Office P8GT Manual

APC Ikke kategoriseret SurgeArrest Home/Office P8GT

Læs gratis den danske manual til APC SurgeArrest Home/Office P8GT (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om APC SurgeArrest Home/Office P8GT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
1990-3646
User Guide - SurgeArrest®
Power-Saving Surge Protector P7GB/P8GT
Complete and return the warranty card.
Read the safety instructions before installing the unit. Failure to follow these instructions may cause damage to
equipment.
• The SurgeArrest is intended for indoor use only. The internal components are not sealed from the environment.
• Do not install the SurgeArrest where there is excessive heat or humidity.
• Do not use extension cords with the SurgeArrest.
• Plug the SurgeArrest into a three wire, grounded receptacle only. If the Building Wiring Fault LED illuminates indicating a wiring
fault, discontinue use and have a qualified electrician check the building wiring for an overloaded neutral, reversed polarity, or
amissing ground.
• Never install electrical wiring during a lightening storm.
• If the SurgeArrest is to be used for telephone protection, connect only on standard two wire “dial up” telephone service.
Overview and Operation
ALWAYS ON Outlets-These outlets receive power at all times. The ALWAYS ON outlets are not affected by the Auto/Manual
switch.
Auto/Manual switch-Connect a computer, laptop or netbook to the MASTER outlet.
• Move the switch to Auto to enable the MASTER and CONTROLLED by MASTER features.
• Move the switch to Manual to disable the MASTER and CONTROLLED by MASTER feature. The MASTER and
CONTROLLED by MASTER outlets will continue to receive power until the unit is unplugged for the wall outlet.
MASTER and CONTROLLED by MASTER outlets-The Auto/Manual switch must be on Auto. When computers, laptops or
netbooks are in standby or hibernation mode, these outlets will automatically shut off power to peripheral equipment connected to the
computers, laptops or netbooks. Power will be restored when computers, laptops or netbooks “awaken”.
• Connect a computer, laptop or netbook to the MASTER outlet.
• Connect the peripherals (monitor, scanner, or speakers), to the CONTROLLED by MASTER outlets.
NOTE: Standby or hibernation mode must be enabled. For Windows, access Control Panel, select Power Options then select Power
Schemes. For MacIntosh, access System Preferences then select Energy Saver.
NOTE: Some computers consume so much power that the MASTER outlet does not recognize standby or hibernation mode. In this
case the CONTROLLED by MASTER outlets will not shut off power to peripheral equipment.
NETBOOK PC/NB slider switch-If a netbook is connected, locate the NETBOOK PC/NB slider on the side of the SurgeArrest.
push the slider to Netbook. If a computer or laptop is connected, push the slider to PC/NB.
Circuit Breaker Reset-The circuit breaker RESET allows the user to reset the circuit breaker after an output overload condition has
caused the circuit breaker to trip. Disconnect all equipment from the SurgeArrest before pushing the RESET button.
Telephone line surge protection jacks P8GT models only-The SurgeArrest provides protection from a power surge through a
telephone line.
• Connect the telephone line from the wall outlet to the SurgeArrest receptacle labeled IN.
• Connect one end of the telephone patch cable (supplied), to the receptacle labeled To Equipment. Connect the other end of the
cable to the DSL modem or FAX machine.
PROTECTION WORKING LED-This LED illuminates to indicate that the SurgeArrest is ready to protect equipment from power
surges. If the LED extinguishes contact APC using the contact information provided in this guide.
BUILDING WIRING FAULT LED-This LED illuminates when there is no ground circuit, or there is a reversed polarity in the
building wiring. Discontinue use and have a qualified electrician check the wiring in the building.
P7GB P8GT
• •
RESEST
srg003a
PC/NBNETBOOK
A
LWAYS ON OUTLETS
CONTROLLED BY MASTERMASTER
PROTECTION
WORKING
BUILDING
WIRING FAULT
RESEST CONTROLLED BY MASTER
ALWAYS ON OUTLETS
MASTER
srg004a
PC/NBNETBOOK
To Equipment In
MANUAL
PROTECTION WORKING
BUILDING
WIRING FAULT
AUTO

Produkt Specifikationer

Mærke: APC
Kategori: Ikke kategoriseret
Model: SurgeArrest Home/Office P8GT

Har du brug for hjælp?

Hvis du har brug for hjælp til APC SurgeArrest Home/Office P8GT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret APC Manualer

APC

APC NetShelter AP7900B Manual

30 Oktober 2025
APC

APC NetBotz Sensor Pod AP9335TH Manual

9 September 2025
APC

APC AR7752W Manual

30 August 2025
APC

APC E3SXR7 Manual

5 August 2025
APC

APC E3MCBC7D Manual

4 August 2025
APC

APC Galaxy VS GVSOPT004 Manual

4 August 2025
APC

APC PME5B-GR Manual

4 August 2025
APC

APC SRT192RMBPM Manual

15 Juli 2025
APC

APC EPDU1216B Manual

15 Juli 2025
APC

APC APV9602 Manual

15 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Duravit

Duravit L-Cube LC614302222 Manual

21 December 2025
Delta

Delta RP36498 Manual

21 December 2025
WAC Lighting

WAC Lighting LTK-764 Manual

21 December 2025
WAC Lighting

WAC Lighting BA-ACLED24 Manual

21 December 2025
AEG

AEG OT350WB1 Manual

21 December 2025
Wine-Mate

Wine-Mate WM-2500SSR Manual

21 December 2025
Vaxcel

Vaxcel T0774 Manual

21 December 2025
Signature Hardware

Signature Hardware Eaton 480901 Manual

21 December 2025
Delta

Delta 23C644 Manual

21 December 2025
Akasa

Akasa Pascal A-NUC24-A1B Manual

21 December 2025