APC UTS10BI Manual

APC Ikke kategoriseret UTS10BI

Læs gratis den danske manual til APC UTS10BI (30 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 75 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 38 anmeldelser. Har du et spørgsmål om APC UTS10BI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/30

Site Preparation and

Installation Guide

Universal Transfer Switch

UTS6

UTS6H

UTS6BI

UTS10BI

bu154a

1 Site Preparation & Installation Guide Universal Transfer Switch UTS6 UTS6H UTS6BI UTS10BI

Introduction

About this product

The APC® by Schneider Electric Universal Transfer Switch (UTS) is a fully automatic transfer switch for use in optional

standby systems in homes or small businesses. This unit provides safe, convenient power for up to ten circuits in the home

or office. Power is derived from one or two independent backup sources. Backup sources being a generator, an

uninterruptible power supply (UPS), a solar inverter, or another alternative energy source.

When connected to home appliances, computers, or entertainment equipment the backup power sources provide power

during utility power outages. When a UPS is used in the configuration, connected equipment (load), can be protected from

utility brownouts, sags, surges, and power outages. The UPS provides continuous power from the internal battery until

utility power returns to safe levels or the battery is fully discharged.

Protect your investment

Fill out the Warranty Registration Card found in the documentation package, or register your purchase online at

www.apc.com:

• This will guarantee that the owner receive all of the information and special offers qualified for as the owner

of this product.

• This will confirm the owners right to maximum protection under the Warranty terms and conditions.

• This will confirm yourself as the owner of the product in the event of fire, theft or loss.

The models supported by this manual vary in appearance and have

some variation in function.

Individual model functionality will be addressed in this manual.

Recommended Tools Recommended Cables

• Phillips screw driver

• standard screw driver

• wire cutter/stripper for 10-12 gauge wire

• utility knife

• insulated pliers

• Robertson #3 square head bit crimping tool

UTS6/6BI/10BI models

UF 10-3 power cable or equivalent of sufficient length to

connect the UTS to a fixed generator or a remote L14

connector.

A larger gauge cable may be needed depending on the rated

current of the connected generator.

UTS6H models

UF 10-2 power cable or equivalent of sufficient length to

connect the UTS to a fixed generator or a remote L5

connector.

UTS10BI

bu154a

Produkt Specifikationer

Mærke:	APC
Kategori:	Ikke kategoriseret
Model:	UTS10BI
Vekselstrømsindgangsspænding:	120 V
Vægt:	12500 g
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-40 - 85 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	-25 - 40 °C
Dimensioner (BxDxH):	595 x 84 x 394 mm
Certificering:	UL Listed
I/O-porte:	IEC-320 C14 \t\t\nNEMA L14-30P
Strøm (maks.):	20 A