APW Wyott SEHP Manual

APW Wyott Ovn SEHP

Læs gratis den danske manual til APW Wyott SEHP (8 sider) i kategorien Ovn. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om APW Wyott SEHP, eller vil du spørge andre brugere om produktet?

Side 1/8
!
!
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.
R
INSTALLATION
OPERATING
INSTRUCTIONS
P/N 88362-15 2-07
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual for the life of the equipment. For
Warranty Service and/or Parts, this information is required.
Model Number Serial Number Date Purchased
MODELS:
EHP, SEHP
APW WYOTT Foodservice Equipment Company
P.O. Box 1829
Cheyenne, WY 82003
+1 (307) 634-5801 Phone +1 (800) 752-0863 Toll Free
+1 (307) 637-8071 Fax www.apwwyott.com
1
ELECTRIC HOT PLATES
24 Hour Toll Free
Service Hot Line:
1-800-733-2203
!
CAUTION: These models are designed, built, and sold for commercial use. If these models are
positioned so the general public can use the equipment make sure that cautions, warnings, and
operating instructions are clearly posted near each unit so that anyone using the equipment will
use it correctly and not injure themselves or harm the equipment.
!
!
WARNING: Check the data plate on this unit before installation. Connect the unit only to the voltage
and frequency listed on the data plate. Connect only to 1 or 3 phase as listed on the data plate.
!
!
!
WARNING: Electrical and grounding connections must comply with the applicable portions of the
national electrical code and/or other local electrical codes.
THIS MANUAL SHOULD BE RETAINED FOR FUTURE REFERENCE
!
!
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death. Read the installation, operating and maintenance instructions
thoroughly before installing or servicing this equipment.
!
!
WARNING: Disconnect device from electrical power supply and place a Tag Out-Lockout on the
power plug, indicating that you are working on the circuit.
WARNING: Install per the spacing requirements listed in the installation section of this manual. We
strongly recommend having a competent professional install the equipment. A licensed electrician
should make the electrical connections and connect power to the unit. Local codes should always
be used when connecting these units to electrical power. In the absence of local codes, use the
latest version of the National Electrical Code.
!
!
Maintenance & repair should be handled by a factory authorized agent. Before doing any maintenance or
repair, contact APW Wyott Technical Service Department at (800) 752-0863 or (307) 634-5801.
MAINTENANCE
!
!
WARNING: Never clean any electrical unit by immersing it in water. Turn off before cleaning
surface.
Once a week, or more often if necessary, clean the unit thoroughly. Turn the unit off and allow it to cool.
STAINLESS STEEL: To remove normal dirt or product residue from stainless steel, use ordinary soap and
water(with or without detergent) applied with a sponge or cloth. Dry thoroughly with a clean cloth. Never
use vinegar or corrosive cleaner. Do not use chlorine based cleaners.
To remove grease and food splatter or condensed vapors that have baked on the equipment, apply
cleaners to a damp cloth or sponge and rub cleanser on the metal in the direction of the polished lines on the
metal. Rubbing cleanser as gently as possible in the direction of the polished lines will not mar the finish of
the stainless steel. NEVER RUB WITH A CIRCULAR MOTION. Soiled and burned deposits which do not
respond to the above procedure can usually be removed by rubbing the surface with SCOTCH-BRITE
scouring pads or STAINLESS scouring pads.
!
!
CAUTION: Do not use ordinary steel wool as any particles left on the surface will rust.
NEVER USE a wire brush, steel or abrasive scouring pads (except stainless), scraper, file or other steel
tools. Surfaces which are marred collect dirt more rapidly and become more difficult to clean. Marring also
increases the possibility of corrosive attack.
NEVER use any corrosive cleaner. Use only cleaners approved for stainless steel.
NEVER use cleaning solvents with a hydrocarbon base.
!
!
WARNING: - SHOCK HAZARD De-energize all power to equipment before cleaning the
equipment.
2


Produkt Specifikationer

Mærke: APW Wyott
Kategori: Ovn
Model: SEHP

Har du brug for hjælp?

Hvis du har brug for hjælp til APW Wyott SEHP stil et spørgsmål nedenfor, og andre brugere vil svare dig