Arctic AATA-5G Manual

Arctic Ikke kategoriseret AATA-5G

Læs gratis den danske manual til Arctic AATA-5G (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Arctic AATA-5G, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

How to apply Arctic Alumina

Premium Ceramic Thermal Adhesive

1. Initial Precautions

2. Technical Precautions and Suggestions

3. General Information and Cure Stages

4. Understanding and Controlling Cure Time

5. Specific Application Instructions

1) Initial Precautions

 Please read all the instructions before using the adhesive.

 Don't give it to children or leave it where children can get a hold of it.

 Don't put it in your mouth.

 Keep it away from your eyes.

 Keep it away from pets.

 Remove from skin with isopropyl alcohol.

2) Technical Precautions and Suggestions

 Arctic Alumina Thermal Adhesive is permanent adhesive.

 There is a very good chance that any components you attach with Arctic

Alumina Thermal Adhesive will stay attached forever.

 Arctic Alumina Thermal Adhesive IS NOT considered grease. It dries, sets

and glues whatever it is used on.

 Arctic Alumina Thermal Adhesive IS NOT intended for use on a CPU. Only if

your attachment mechanism is broke and you understand it will permanently

glue your heatsink to your chip should you attempt doing it. If not then,

ONLY use Arctic Silver Thermal Compound/grease on a CPU.

 Arctic Alumina Thermal Adhesive should be kept cold and away from UV light

(sunlight and florescent lighting).

 We recommend refrigerating the unused material tip down and allowing it to

come to room temperature prior to use.

3) General Information and Cure Stages

Cure Time

Mixing the resin Part A and the curing agent Part B begins a chemical

reaction that transforms the combined liquid ingredients to a solid. The time it

takes for this transformation is the cure time. As it cures the adhesive passes

from the liquid state, through a gel state, before it reaches a solid state.

Liquid-Open Stage

Liquid-Open time (also "working time") is the portion of the cure time, after

mixing, that the resin/curing agent mixture remains a liquid and is workable

Produkt Specifikationer

Mærke:	Arctic
Kategori:	Ikke kategoriseret
Model:	AATA-5G
Vægt:	5 g
Produktfarve:	Black, White
Driftstemperatur (T-T):	-40 - 150 °C
Bæredygtighedscertifikater:	RoHS