Arecont Vision ConteraCMR AV-CN1600 Manual

Arecont Vision sikkerhedskamera ConteraCMR AV-CN1600

Læs gratis den danske manual til Arecont Vision ConteraCMR AV-CN1600 (4 sider) i kategorien sikkerhedskamera. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Arecont Vision ConteraCMR AV-CN1600, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

+1.818.937.0700 | www.avcostar.com | avsales@arecontvision.com

Plug the supplied power cord into the recorder.

Do not connect the plug to a power source at this time.

Connect the network cable intended for remote

connections to the Client NIC.

Connect the supplied keyboard and mouse using

the USB ports.

Connect a monitor using the HDMI or DVI-I ports.

Note: The Camera NIC is intended for use

with a dedicated camera network.

Note: For models with PoE ports, use the Camera NIC to

connect a camera network. The Camera NIC is equipped

with a DHCP server. Connecting to a network with another

DHCP server will cause signicant network issues.

Connect the cameras to PoE ports, or the external

camera network.

Connect the power cord to a power source, and

then turn the recorder ON.

Windows® Only - Sign in with default log in credentials:

User Accounts: NVRAdmin, NVRUser

Password: Recorder Serial Number

Note: The serial number can be found on the side of

the Recorder.

Note: It is strongly recommended the password

is changed during initial setup.

Windows Only - Open the Contera Server login on

the desktop.

default credentials:

Username: admin

Password: 1234

Follow the Setup Wizard to complete basic setup

of your system.

SETTING UP YOUR RECORDER FOR THE FIRST TIME

Remote Communication Port 80 (8888 used if 80 is blocked)

Client NIC IP Address DHCP

Camera NIC (External Switch) 192.168.51.1 / 255.255.255.0 (Gateway and DNS blank)

Camera NIC/Internal PoE

(NVR Appliance Models)

192.168.51.1 / 255.255.255.0 (Gateway and DNS blank)

Network Information

This guide will assist you with the initial setup of your ConteraCMR® cloud managed appliance and recording software. This guide

includes hardware setup, software setup, network conguration, and connecting your appliance to the ConteraWS ® Web Services Portal.

ConteraCMR® Cloud Managed Recorder Series

ConteraCMR

Part of the Total Solution

Quick Installation Guide

2+1.818.937.0700 | www.avcostar.com | avsales@arecontvision.com

Camera Management

Contera Server software makes it easy to add and congure IP cameras.

Contera recorders will detect cameras connected to the Camera NIC

Note: Third party cameras may need to be congured using a third party

program before being added to the Server. Cameras that don’t support ONVIF

can be congured to record via RTSP streaming.

Adding Auto-Detected Cameras:

Contera Server software automatically detects ONVIF Prole S compliant

cameras set to DHCP. Cameras not meeting these requirements must

be congured manually.

1. Click , and then click

Setup Cameras.

2. Click Add Cameras.

3. For automatically detected cameras, select the camera(s) using the

check boxes, and then type the appropriate and Username Password.

4. Click Add.

Note: The recorder will automatically detect and add most cameras connected

to the on-board PoE switch as long as the cameras are set to DHCP.

Adding Cameras Manually:

1. Click , and then click

Setup Cameras.

2. Click Add Cameras.

3. For cameras not automatically detected, click Add Cameras Manually.

4. Select the ONVIF or the RTSP protocol, and then type the appropriate

Title, IP Address, Username, and Password.

Note: When using RTSP, specify the individual URL streams for your cameras.

For instructions regarding these streams, consult the camera manual.

5. Click Add Cameras.

Conguring Recording Settings:

For optimal motion detection, cameras should be congured with a

secondary stream of 720x576 or lower. Contera will still detect motion using

a higher resolution stream if a 720x576 or lower stream is not available, but

this will consume more system resources.

1. Click , and then click

Setup Cameras.

2. Select the desired camera, and then click the Live/Recording tab.

3. Congure the settings as desired.

Note: Continuous + Motion recording is the default setting for all cameras

upon connection to your recorder.

Advanced Camera Management

Cameras set to static IP addresses, third party cameras, and cameras not

supported by ONVIF may not be detected automatically. To congure

cameras not automatically detected by Contera Server software, follow the

steps below.

Conguring AV Costar™ Cameras with a Static IP

Address (Linux® models only):

1. Click , and then click Setup Support Tools.

2. Click Launch Support Tools.

3. Click AV IP Utility

™.

4. Note the discovered for the desired camera.IP address

5. Click to return to Contera Server software.Exit

6. Follow the steps in the Adding Cameras Manually section, typing the

Static IP Address.

Note: Network Camera Manager can be launched from the Windows

desktop icon.

Conguring AV Costar Cameras with DHCP

(Linux models only):

1. Click , and then click

Setup Support Tools.

2. Click Launch Support Tools.

3. Click AV IP Utility.

4. Select your desired cameras, and DHCP, and then click Apply.

5. Click to return to Contera Server software.

Exit

6. Follow the steps in the section to add Adding Auto-Detected Cameras

the camera.

Note: AV Costar cameras on Windows can be congured with DHCP by

launching Network Camera Manager from the Windows desktop icon.

Adding Third Party Cameras:

Third party cameras may require installing a manufacturer camera discovery

tool on a separate PC. Once the camera discovery tool is installed, follow

the steps for adding a camera with a static IP address or using DHCP as

outlined above.

Adding Cameras Not Supported by ONVIF:

You must add cameras that are not ONVIF-compliant using the RTSP

stream of the camera. Consult the manufacturer’s camera manual for more

detailed information regarding RTSP streams. When you know the URL for

the RTSP stream of your camera, follow the steps in the Adding Cameras

Manually section, selecting RTSP protocol.

Sensor/Relay Card

Contera Server version 1.2 or higher is required for use of the Sensor/Relay

Card. See page 36 of the Contera Server Software Manual for instructions

on setting up the Sensor/Relay Card on the software.

Note: Do not remove the Alarm I/O adapter. It is permanently attached to

ensure full integrity of the connections. A small ne-tip screwdriver might be

needed to access the lock screws on the adapter.

Advanced Network Setup

In some cases, advanced network settings may be applied to set up an

optimal local or remote connection. The following steps are optional.

Please contact an AV Costar support technician if you are unsure of your

video network.

Direct Connection:

With direct connection, network trafc bypasses the ConteraWS cloud relay

service, allowing for optimal connection speeds. This conguration requires

additional steps, including router conguration, to forward trafc to the

appropriate Contera recorder.

Note: Visit http://portforward.com/English/routers/port_forwarding/

for instructions on router conguration for direct connection.

1. Access the router used for Internet communication and forward TCP

port 80 to the internal address of the Contera Server recorder.

ConteraCMR

| Quick Installation Guide

Produkt Specifikationer

Mærke:	Arecont Vision
Kategori:	sikkerhedskamera
Model:	ConteraCMR AV-CN1600

Har du brug for hjælp?

Hvis du har brug for hjælp til Arecont Vision ConteraCMR AV-CN1600 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

sikkerhedskamera Arecont Vision Manualer

Arecont Vision AV1455DN-S Manual

2 Februar 2025

Arecont Vision MicroDome Manual

2 Februar 2025

Arecont Vision MicroDome AV5455 Manual

2 Februar 2025

Arecont Vision AV2455DN-S Manual

2 Februar 2025

Arecont Vision AV40185DN Manual

2 Februar 2025

Arecont Vision AV3456DN-F-NL Manual

2 Februar 2025

Arecont Vision AV5215PM-S Manual

2 Februar 2025

Arecont Vision AV2456DN-S Manual

2 Februar 2025

Arecont Vision AV2456DN-F Manual

2 Februar 2025

Arecont Vision AV3216PM-S Manual

2 Februar 2025

sikkerhedskamera Manualer

Nyeste sikkerhedskamera Manualer

Miniland Digimonitor Easy 89506 Manual

24 Februar 2025

AVer PTZ330UNV2 Manual

24 Februar 2025

Axis F2137-RE Manual

23 Februar 2025

Iluv mySight 2K Manual

21 Februar 2025

Moen Flo 900-002 Manual

19 Februar 2025

IDIS DC-T4217WRX Manual

13 Februar 2025

IDIS DC-S6281HX Manual

13 Februar 2025

IDIS DC-T4517WRXP Manual

13 Februar 2025

IDIS DC-D4831HRX-A Manual

11 Februar 2025

IDIS DC-D4237RX Manual

11 Februar 2025