Arecont Vision MegaDome AV1355 Manual


Læs gratis den danske manual til Arecont Vision MegaDome AV1355 (2 sider) i kategorien sikkerhedskamera. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Arecont Vision MegaDome AV1355, eller vil du spørge andre brugere om produktet?

Side 1/2
Arecont Vision MegaDome TM Installation Manual
0 | P a g e
Arecont Vision MegaDome TM Installation Manual
1 | P a g e
MegaDome™ Installation Manual
Inside the box:
A. Arecont Vision MegaDome TM
B. Mounting template
C. Magnetic core
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. One double sided hex key
F. One single sided hex key
G. Security L-key
H. Power cable
Not included but needed:
#1 Phillips head screw driver
#2 Phillips head screw driver
Image 1
Mounting the Camera:
1. Remove camera and hardware from the
box.
2. Using the Mounting template, prepare the
mounting provisions for camera
installation. NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
MegaDome TM
, align accordingly. If using
the side conduit hole, please see step 9
below.
3. Using Security L-key, loosen the four (4)
screws securing the dome cover (Image
2). Remove vandal resistant dome
cover. NOTE: Do not remove screws
from the dome cover.
Image 2
H
G
F
E
C
D
B


Produkt Specifikationer

Mærke: Arecont Vision
Kategori: sikkerhedskamera
Model: MegaDome AV1355

Har du brug for hjælp?

Hvis du har brug for hjælp til Arecont Vision MegaDome AV1355 stil et spørgsmål nedenfor, og andre brugere vil svare dig